How to Make a SOLID WOOD TABLE Top WITHOUT Stress
Vložit
- čas přidán 3. 06. 2024
- 00:00 Welcome
00:32 Choosing boards
00:57 Making good edges
01:55 Planning the layout
03:26 Testing the joints
04:21 Quick tip
04:57 Dominos vs Biscuits
05:32 Gluing up with biscuits
07:05 Gluing up with dominos
07:45 Gluing the whole panel
09:00 Flattening with belt sander
09:52 Trimming to size without fancy tools
10:50 Using C-Channel?
11:45 Applying finish
***
Visit us for hardwood lumber!
www.woodworkerssource.com/
***
Follow us for absolutely no good reason!
Instagram: / woodworkerssource
Facebook: / woodworkers.source.har...
Twitter: / woodwrkrssource
***
Sounds
Stock Media provided by Woodworkers Source
Sights
Stock Media provided by Woodworkers Source
*** - Jak na to + styl
Trust me. It's not another "Domino vs Biscuit Shootout!" vid 😉
Even though domino is better…haha
So you have a Domino but not a track saw.... ;)
@@banjerlegs3051 😇
@@WoodworkersSourcecom Nice job ! Could you please tell me how long did you let that epoxy filling to dry , before you started to sand it ? Thank you
This vid creates a compelling argument for the obsoleteness of biscuit jointers.
czcams.com/video/HEHXuoU-CLM/video.html
The gluing bridges are really the star of the show...
The simplest "jig" that comes in handy more times than I can count
Have watched a ton of videos on this topic and you don't waste time, mince words, and explain sufficiently. Great stuff!
Awesome! Thank you!
I’m 3 minutes in and was like man this is solid advise. I didn’t even realize who was producing this video, keep up the content
Thanks, man! But the shirt didn’t give it away?? 🤣
@@WoodworkersSourcecom 😂😂 you guys started sponsoring at least one channel I watch, didn’t think twice about it.
Downsizing to a much smaller space after some life changes. Just the video I need for a custom table!
Since I surface all of my rough cut stock myself, I always try to glue my panels into widths that will fit in my planer. Once I have all the 12" panels glued up I plane them to the same thickness and then do a final panel glue-up to make the full tabletop. Having S2S or S4S lumber at the beginning would certainly make the process a bit faster, if not a lot more expensive. Thanks for another great video. Love watching your content.
Mark, A special shout out to you, Cory and the dedicated professionals at Woodworkers Source. I deeply appreciated your hospitality during my visit to Tempe last year. Great video and thank you for supporting the woodworking community.
Those guys!? YEAH! They're a little on the hairy side, but they're definitely a class act who make Woodworkers Source what it is. We'll save you a first-class shady parking space anytime you're here. Thank you.
Thanks so much, this was so great. I'm just a gal that has never done wood-working and trying to figure out how to make a table top. Cool you have so many skills, wow! Will check out your online shop. Take Care.
I liked your personal opinion on laying out your grain patterns!
It's fun doing artwork with imperfect hardwood
Thanks Mark, always love your builds and the great lumber you guys sell.
You have a very informative video. SO i made a table top for my wifes laundry room last week. I messed up so much. i forgot to use the biscuits. THIS is a lesson -when you are 85 you have to THINK. THINK and remember to --think
Sorry about that, but I bet it still came out beautifully
What a gorgeous piece of wood
"Wood has a mind of its own." True dat.
Another great video and way of showing how to do the work in a small shop. I use a biscuit joiner and have not ever had a problem.
The author does like to from scratch, czcams.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
@5:17 "dent your Tesla or college fund" That had me cracking up. Every order I placed with you all has been FANTASTIC! And the hexagon wine rack project was a big hit (gave it as a gift)
I am so glad I saw your video, yes I am looking for lumber a lot of the time. I will definitely keep you in mind!
The end was Exactly what I was looking for. Everyone seems to be using C-channels but my table is going to have a really sturdy base and was trying to figure out if it was necessary. Thanks!
Great tip on using the router with the straight edge to get the finished edge.
Love the practical techniques for a larger project like this. Picked up a few tips I will be using in my next tabletop build.
Glad it was helpful!
Love the way you kept it clear. Thanks for the many tips you provided
Glad it was helpful!
You can also use dowels if you you don't want to buy a biscuit jointer.
Exactly! Dowels have been around forever, but everyone just “has” to buy a domino and let it collect dust🤣.
Work in a body shop seriously looking to get into wood working. One thing that worried me was planing without having a machine to do it. I didn’t realize you can use similar methods used to straighten body work on large wooden projects. Thanks
Likewise, had no idea about body work!
Absolutely beautiful.
Man great video, awesome that you show this can be done by anyone with out having to have thousands and thousands of dollars worth of green and black tools.
Liked the small arches you made and used on the end of the boards to align them. Good info video, thanks!💯
No problem 👍
Great job and great tips!
Another great, informative video, Mark. Thanks again.
Glad you enjoyed it, Hal!
Great video…perfect timing as I am about to start a new project that includes two 25” panels (with hardwood lumber purchased online from y’all!!). Thanks for continuing to produce these videos with such outstanding content!!!
Thank you 👍
Beautiful
Thank you! Cheers!
Thanks for all the great content. I learn something every time I watch one of your videos. Since I discovered your channel, I have begun purchasing material from your store via mail order and I've been very pleased with the entire experience.
Great to hear!
Thanks so much for this video! Very helpful and practice tips which make it less frightening to tackle a project like this.
Glad it was helpful!
Great video, Mark. I am personally always pleased with my Woodworkers Source lumber purchases. Always, period.
Right on!
Easy too fallow ,, thank’s from Montreal Canada
best video i've come across for this topic! thank you so much!!
Glad it was helpful!
Looks great thanks for sharing
Very clear walkthrough Mark 👏
Thank you, so glad it was helpful!
You have a great video! I learned alot.
Glad it was helpful!
High quality and informative video... very nice.
thank you
Great tutorial with a brilliant teaching method thanks
Glad it was helpful! Thank you
Walrus Oil FTW!
Good to see another video from Mark.
Hope you enjoyed it!
Thank you for this video. I bought a trailer load of walnut from an auction. I have decided to build countertops for my kitchen with part of the load. This will help me immensely.
Glad it was helpful!
Great job!! I watched this for second time as I begin making another table.
Awesome! Thank you!
I bought the $50 Wen biscuit joiner a 1/2 year ago and I have no complaints. Saves so much time on sanding and clamping. I do this for my career and although the festool feels and looks cooler, the same job is being done at the same level.
agreed, it's a bargain at $50
This video is full of gold dust! Thank you my man
Happy to help!
Thanks, I ordered some wood from you guys and was pleased with it!
awesome, thank you!
Looks great. Awesome video dude. Very well done 👊😎👍
WHO WOULD HAVE THOUGHT TO MAKE A EDGE ALIGNER LIKE YOU DID !!! I LEARN SOMETHING NEW EVERY DAY .. 😇😇😇😀😀😀
at your service!
What a beautiful top!
Thank you! 😊
very nice,I made my table and other projects, thanks for the info👍👊
Thanks Mark, some useful tips in there I'll be using.
Awesome
that was super useful! Thanks mate!
No problem!
Amazing video
Marc
Great process! I have been using this process for years. Don’t worry about each board being exactly the same width, or needless worry about the annual rings. As an alternative, I generally glue the first two boards together and then add to it with the other boards one at a time. Reason finding that is I one time glued in halves, but one half had a slight bow. It was then way too big for the jointer.
I appreciate showing the belt sander, but I know you have a wide belt sander in your Chandler store. Been there many times…😅
You've got a point there! The fact that the panel in this vid worked out to be two halves was pretty much incidental. The bigger point was to tackle a big glue-up in bite sized steps.
Hear ya about the big wide belt sander 😎 That bad boy saves you some time for sure!
Inspired me to do something like this
Great tips! Nice video
Great video... after a fire...roofers are replacing the whole roof... like the HMS Resolute... I want to salvage enough raw material to make a few meaningful pieces of furniture like a desk and dining table.... the ideas here are amazing! The jigsaw rough-cut, and finish with a router...Dang.
Thanks for such good ideas.
Beautiful results…
Thank you! Cheers!
I like the plywood alignment jig you made. I'll use that idea for my table top. Question: is that walrus oil suitable for a dining room table? Does it make the surface durable enough for a dining table?
Fantastic build! I built my desk from a butcher block countertop. I followed all the instructions (get it sealed or oiled ASAP), but after 6 months I still got stress cracks. I've since fixed them, but it was still a huge annoyance.
Agreed, that'd be annoying. Hard to say what the culprit was or if there was anything else you could've done.
Great video. Be watching again when I make my table. Do you have a video regarding those steel c channels? Not quite sure how those allow the table to expand and contact so must be thinking about it wrong.
I source some of my hardwood from you guys.
Thank you!
I buy a lot of different species just to see how well I can work with it. Great variety, nice packaged set of whichever species I want in what size I want. None of the boards have ever come twisted or bowed. I love you guys!
Wondering if using a router table with the appropriate bit would accomplish what the table saw does wrt straightening the board edges before glue up?
Nice video. I'm curious, why wouldn't you put biscuits or dominos closer to the edge to prevent that misalignment?
Great video. Do you have a video or information on the base that you built/used? It looks pretty interesting also. Take care...
You bet! Check this out: czcams.com/video/EW4Ik3L7ZWg/video.html
An alternative to the biscuits is to stand the boards on edge and rip a slot in the middle of the board. Alternatively, you can also cut a slot with a slot bit and router. The table saw is less setup but does show the slot in the end.
I dream of having your limited shop/tools. Your dust collector is more $ than all mine combined 🤪
Haha! I get it. Didn’t have a dust collector for a long time, and now I fully appreciate how much it helps keep things tidy
Thanks so much for the video, quick question, how many hours would this typically take without recording everything?
Honestly:
1 hour: Selecting boards
2 hours: Arguing over grain arrangement
1 hour: prepping edges
1 hour: clearing sh*t off the workbench
1 hour: second guessing grain arrangement
1 hour: clamping and admiring a job well done
72 hours: procrastinating
3 hours: smoothing joints and flattening
3 hours: beer break
5 hours: trimming to size, edge routing & finish sanding
96 hours: procrastinating
10 mins: applying finish coat #1
24 hours: waiting to apply coat #2
72 hours: procrastinating
10 mins: applying coat #2
24 hours: waiting
1 hour: buffing and admiring and buffing and admiring
😎😎😎
i've made dozens of table tops over the years with my biscuit joiner before I ever got a domino. but now that I have a domino I would only use that knowing how tight the tolerances are compared to the looser biscuits. depends on the project. I don't understand your end clamps for alignment why do you have a circle cut out there that just introduces room for more play. use solid blocks with blue tape if you're concerned about sticking. I also find Kreg clamps to be very handy for flattening down adjoining boards
Didn’t want them to get glued to the work, and didn’t think to use tape! Oops. Where were you when I needed you ? 🤣🤣
is tere anyone who tried this in practice with the beginner skill? I wonder if to give it a try
what type of clamp did you use?
You have a Festool Domino, but not a track saw? That's an interesting tool choice. I'm NOT saying its wrong. I'm just having a hard time imagining what combination of types of work would cause me to acquire a Domino before a track saw.
For me it was because I bought a domino when they came out and I didn't even know track saws were a thing. I didn't even get a track saw until last year. I honestly still don't use the track saw very much but will be doing so in a closet build coming up.
yeah! interesting that's what you noticed! The scoop is I can't fit full sheets in my car anyway, so I have them cut down at the shop so I can haul them home. Had more use for the tenon cutter than for the saw, so here we are.
@@WoodworkersSourcecom Well, in fairness, it's not the ONLY thing I noticed. It's just the only thing I chose to comment about. Since I got my track saw, I almost never use my table saw. Just shows there are many ways to accomplish the same task in woodworking. (None of the methods are necessarily wrong. But, mine are better, or something like that. I forget how the saying goes.)
I'm sitting at a desktop I made out of solid ash over 40 years ago. I used many of the methods you outlined in the video (biscuits, not dominos) and the desk has served me very well. I hope you get as many years out of yours.
@@WoodworkersSourcecom Another good point. I generally don't transport full 4x8 sheets for furniture projects. To be honest I was on the fence when I bought the domino (at 800$ at the time)...I was routing mortises quite regularly with my Bosch plunge router, a spiral bit, and an edge guide with micro-adjust (and some mdf slapped together for a jig). I'm still on the fence about whether or not that was a good purchase.
I've seen people doing this without using biscuits. It's been awhile since woodshop but I can't imagine those tables being durable long term but maybe I'm wrong.
I am struggling to get glue ready edges on long boards. And advice? I didn't see you use a jointer, just the table saw.
Hey friend! Can you fit a 4x8 sheet in your Bronco?
not a chance 😕
Just curious, what thickness wood did you buy for your desktop?
4/4
You ship to Canada?
You have a price list for your wood martial stuff?
How about using dowel pins for alignment?
It’ll work, they just require more precision
Was that Rush Working Man that you washed out at 10:35-10:53?
No, just some stock sounds . . . but you've got a good ear and downright exceptional taste in tunes.
ARIZONA❤❤❤❤
What did you use for the finish?
Furniture butter by Walrus Oil
What was the original thickness of your boards and the final thickness of the table top?
Where do you get the wood bridges???!
Made em
Im sure someone asked already, but what kind of wood did you use for this project?
American black walnut, bud. The one and only!!
What’s the price of that particular lumber you used mark. Price per board foot. As of March 2023 ????$$$$?????
thought you'd never ask 😎 that's our "character walnut" comes at $11.99
I always thought that a good glue-up requires hand planing after ripping down the edges.
Tell Eddie to hurry up please 😂😂😂😂😂
dominos over dowels?
Whatever makes you happy is the way to go
You don't have a tracksaw but you have a $1200 biscuit jointer?!
Correction it’s a $69 biscuit jointer 🤣🤣🤣🤣🤭🤭
It's more lecture than practical
Let us know what you need
Not showing the expoxy infill was disappointing . Not detailing the final finish coat was also dissapointing. If you are going to demonstrate a build. Then show everything in the build. You also never detailed the spacing and size biscuits you used on biscuits and dominos. I would like to have seen a close up of the end cuts after final finish. All details are important to viewers.
Sorry bro, got you next time 👍
of you could just use dowel and not spend money on useless tables.
Um what lol
Not easy at all
What about stres?? 😉😉
How is that solid wood?........it's a glue up of multiple peices😮......a slab is a solid wood tabletop😊
This is one of the dumbest things I've read in a looong time🤨
🤭🤭🤣🤣🤣 I know, right????
The traditional method for marking for joinery is to draw a Triangle, leads to less confusion.
@@dropndeal BS, a big X creates a book face/mirror image leading to confusion when laying them up again, a triangle can only be put together one way. Hence it’s the tried and proven traditional method.