I never cut any stiches, the boot is leather so I dipped the tip of the boot in Hot Water for a few minutes and had no problem sliding my Barton Pistol Grip in through the boot. Also used the packing wrap Barton shipped it in to protect my old shift knob. I have a 2021 Challenger SRT if interested. I love my new Barton much better than the old Mini Van knob that was there!
I'm having a problem with the shifter not easily down shifting (pushing forwards in a challenger) when in manual mode. I can up shift without any pressure on the handle, but to down shift I have to press down on the handle. Any suggestions?
@@bigl1904 I contacted Barton and they worked with me on getting a new "bracket". There was an issue with where the hole was drilled. Tell them that Dave Sr. worked with me 2 years ago and figured out a fix.
@@sidneysmith5542 Wow this seems kinda half baked man. Can't imagine driving around with a wire coming out of the console into the cup holder and having a shift fly all over the place every time I take a corner.
It's possible it will. But probably only the shifter. It should not void the power train or anything else. Know that if something goes wrong, the dealership has to prove the shifter caused the problem.
@@streetslickz I've had the shifter on for 3 years without any issues. I did the install myself and I'm close to being handyman. You just need to remember to tell the next person that drives your car to push down on the shifter to release it from gea. Otherwise they won't know what to do and might start yanking on it.
I work at Dodge and they just tried to put it on, and said that it didn't work. I'm going to show them the video tomorrow and then I'll post again. I don't see why it won't work.
I never cut any stiches, the boot is leather so I dipped the tip of the boot in Hot Water for a few minutes and had no problem sliding my Barton Pistol Grip in through the boot. Also used the packing wrap Barton shipped it in to protect my old shift knob. I have a 2021 Challenger SRT if interested. I love my new Barton much better than the old Mini Van knob that was there!
Removing a couple of stitches will eventually loosen in time. I would glue or use a lighter to melt (stitches) together so it won’t come loose.
Just installed mine. Love it!!! Thanks for the video. Made the install a breeze.
As much as would like to do this, I would totally fuck it up.
Anyone know the threading type for the T-handle stem? I have a few shift knobs I’m curious if I can switch them out every once in a while.
I have a 2015 ScatPack Challenger and the climate control knobs are part of the bezel. can you show how to install a shifter with that setup?
What is that first set screw size at 6:50?
I lost the screw you put in last. What kind of screw is it so I can buy another?
Do you lose the “auto stick “ in an automatic when you install this?
Is dark colored shift considered black? I like the textured look.
Wish these worked on the 11-14 model Chargers
Is there any lube included or do you recommend any type of lube because it looks like metal on metal when sliding the shifter up and down? Thx
Looks like u can't go back to stock after this correct?
Where can I buy a new slider block? mine is missing.
YOU JUST MADE YOURSELF A SUBSCRIBER!!!
My 2014 charger has this style of shifter should it matter on what type of shifter I buy
I'm having a problem with the shifter not easily down shifting (pushing forwards in a challenger) when in manual mode. I can up shift without any pressure on the handle, but to down shift I have to press down on the handle. Any suggestions?
Brian Reiber Did you ever get the problem resolved? I’m looking at ordering one.
Same issue here. Any solution?
@@bigl1904 I contacted Barton and they worked with me on getting a new "bracket". There was an issue with where the hole was drilled. Tell them that Dave Sr. worked with me 2 years ago and figured out a fix.
@@JBWHITEGT Sorry Jimbo Slice just saw this, see my response above.
So what happens to the factory shifter? Did I miss that?
The factory shifter goes in an empty compartment in front of the shifter
Sidney Smith that's what I thought. I was just double checking. Thanks!
So, I have to keep the old shifter plugged in, just hanging there?
@@paulstarybrat781 Yes or else it will throw an error code
@@sidneysmith5542 Wow this seems kinda half baked man. Can't imagine driving around with a wire coming out of the console into the cup holder and having a shift fly all over the place every time I take a corner.
No "trigger" to pull to put it into gear or shift?
Pushing the shifter down unlocks it just like the trigger.
Does anyone have any knowledge on whether or not this will void your factory warranty?
It's possible it will. But probably only the shifter.
It should not void the power train or anything else. Know that if something goes wrong, the dealership has to prove the shifter caused the problem.
@@brianreiber2362 Got yah. I appreciate that info. I felt like that would be the case, so that is good to know. It may be a risk I am willing to take.
@@streetslickz I've had the shifter on for 3 years without any issues. I did the install myself and I'm close to being handyman.
You just need to remember to tell the next person that drives your car to push down on the shifter to release it from gea. Otherwise they won't know what to do and might start yanking on it.
Do you sell the automatic shifter adapter only for the 2019 Charger RT? Want to upgrade from factory but looking toward the speed dawg ball shifter.
Does this work on the '19 scat pack
I work at Dodge and they just tried to put it on, and said that it didn't work. I'm going to show them the video tomorrow and then I'll post again. I don't see why it won't work.
@@jaspergreenbay did it ever work on the 19 Scat Pack?
@@jaspergreenbay any news?
Any update on this?
Yes this will work on any of the 15+ Challenges or Charges, does not matter what the trim level is.
Why the fuck is the screw so hard to take out holy shit
Wish there was one made for jeeps... Custom/group purchase deal.
Dang. Poor guy had a bit of a hard time finding the hole.
Thats what she said
2015 scatpack challenger automatic
It will work for you.
🤦♂️