Updating FrSKY RB firmware and installing the ETHOS LUA script RB25 RB25S RB35 RB35S
Vložit
- čas přidán 22. 07. 2024
- 🔗 www.MrD-RC.com 🔗 / mrd_rc
In this video, we look at how to update the RB25, RB25S, RB35, or RB35S. We go through all the steps, from downloading the firmware, software, and scripts. To installing them on your RB device and ETHOS transmitter. Currently, prerequisites for installing this firmware on your RB device is the STK Tool. There is a link to the tool below.
✈️ Contents ✈️
00:00 Introduction
00:48 Downloading the firmware for the RB device, ETHOS LUA scripts, and the STK software
02:34 Installing the Windows driver for the STK adapter, if you need it
03:20 Extracting the STK update tool
03:34 Extracting the RB firmware to the desktop
03:52 Preparing the RB device for update
05:16 Flashing the RB device with the new firmware
06:50 Installing the RB device LUA scripts on your transmitter
06:58 Where to install the LUA scripts
07:42 Connect the transmitter to your computer
07:49 Copying the files to the correct drive on your transmitter
09:48 Locating the RB LUA tools on the transmitter
10:38 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
🔗 FrSKY website:
⚙️ FrSKY Tandem X18 transmitter: bit.ly/MrD_3LD7R1j
⚙️ FrSKY RB35S: bit.ly/MrD_FrSKYRB35S
⚙️ FrSKY STK tool: bit.ly/MrD_FrSKYSTK
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help CZcams share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at / discord
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows CZcams that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at / mrd_rc
🛩 If you prefer, you could always buy me a Coffee at www.mrd-rc.com/go/ko-fi/
🛩 I also have merch at mrd-rc.creator-spring.com/ This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
#FrSKY #RB25 #RB35 - Jak na to + styl
Another great video, thanks D
Thanks Craig 👍
Thanks!
Thank you very much Stephen 👍
Ya I feel the rb35s has some glitchy issues for some reason I can only get elevator to work is stab mode. Been through the setup bunch of times. And getting sensor loss off and on I must have 10 hrs working with it...Also issue running 3 TDmx rx seems to drop a rx when I seitch them to Fbus out through smart port pin Its not cool I feel it needs a update Love your videos
Darren, enjoy you videos but you don't need the STK to update the RB25S firmware. I simply copied the latest RB35 firmware from the DrSky site, connected my RB25S to my X20S transmitter via a male to male cable between the transmitter and the Rx1 port of the RB25S, go to the file manager, select the firmware file and click update remote device. This at least works with my X20S with Ethos V1.4.9 installed. Hopefully someone will find this helpful.
Thanks for the info. I was told by FrSKY that the RB35 can’t update without the tool at the moment. But should work from the transmitter in a future version.
How do you flash the new firmware onto the RB35 via the X20S directly? Used to be a simple process and no need for the STK interface.. or need for a PC..
I have the RB35s, did not try in a plane yet, but working on it on the bench we having issues 'Sensor lost' when we go into RB config or RB stab menu, and Stabilization option is grayed out when IMU mode is set to Basic. I hope the firmware update fixes this.
Hello Darren, sorry for the off topic, I'm quite confused. I have the taranis X9D Plus edition before 2019, accst, I can not do the bind with the receiver G-RX8, I put the receiver software in the taranis and I can not do the bind o. Do I have to use the xjt external module because of accst v2. I have open Tx 2.3.15. Can you help with your knowledge? Regards Vítor.
It sounds like the transmitter and receiver are using different versions of the firmware. Your transmitter will be using ACCST, same as the G-RX8. But these could still be on ACCST v1 or v2. If you are unsure which version you are using. I’d recommend updating all to the latest ACCST firmware. Unfortunately this will mean updating all of your receivers. But at least then you would know for the future. Plus ACCST v2 does fix some issues.
The other option is to update the firmware on the receiver only until it works with your radio. There is only 2 versions. The latest firmware (ACCST v2) and the historic firmware (ACCST v1). You don’t need to worry about the ACCESS firmware, as your radio can’t use it. One of those firmwares should work.
Hi thank you for your videos, i have a tx16s running edgetx and i bought the RB-25. Unfortunately, there are no LUA scripts to configure the failsafe values for edgetx 😢.
Can you please help me having a way to overcome this? I have a brand new 30cc plane waiting for his maiden due to this lack of configuration. Please help!
X2
Is there a forecast date for the RB35S update?
Hi i have x18 tx, will the 1.5 ethos work on my transmitter ?
Also any news on the rb25 update via tx direct option ?
also you mentioned doing a walk through of the RB25 lua configurables ?
@mrd
Looking at setting failsafe on rb25, I understand that by default it's set to 998uS and should be 1500us or configurable..
When the next ethos update comes out,will it have the new lua scripts in it for this stuff?
I would imagine the scripts will be in the ETHOS 1.5 release. There is a 1.4.11 scheduled. But this looks to be a release firmware for the X20 Pro with some bug fixes. 1.5 has the main focus as far as I'm aware.
Does this video apply to TD SR18 Tandem receiver
I also have the latest firmware update on the X20S 1.4.16 and the receiver 1.0.11
Where are ya darren😢
I was quite ill last week. But normal service will be resumed soon.