How to put a tiller on a Wheel Horse C120 tractor

Sdílet
Vložit
  • čas přidán 2. 02. 2024
  • Getting the Wheel Horse ready for the garden this spring by adding a tiller to the back. Note: I had the belt on the outer pully on the PTO but had to move it to the inner pully as it was not lined up correctly.
  • Auta a dopravní prostředky

Komentáře • 21

  • @raylebonville7499
    @raylebonville7499 Před 3 měsíci +1

    I have wasted several hours today trying to get it to raise. I was using the lever with a "throttle cable" running to the tiller. (not too good). I may use a winch or a servo now that I've seen yours. Big thanks

  • @user-bl4jw4ju6q
    @user-bl4jw4ju6q Před 2 měsíci

    IS THERE A SUPPORT BRACKET ON THE END OF THE ROLL BAR ON THE FRONT BELT PULLEY THE BAR IS NUMBER 23 ON PARTS DIAGRAHM ITS PROBALY A SADDLE BLOCK I NEED ONE

  • @user-hs8sw1mz2j
    @user-hs8sw1mz2j Před 5 měsíci

    Many thanks for posting your video, I have been trying to find a way to raise a tiller I have acquired, struggling to get hold of the Wheel Horse lifting parts. Can you give some details about your winch please? What make and model, where did you get it from etc? On my C125 the fuel tank might be in the way to mount a winch like you did.

    • @DJsWorkshop
      @DJsWorkshop  Před 5 měsíci

      Just a cheap harbor freight winch is all you need. I drilled 2 holes in the bracket under the seat and bolted the mount to that. Way better than straining your back trying to lift it
      .

    • @devin6334
      @devin6334 Před 3 měsíci

      You should be able to buy the Rockshaft kit from Wheelhorse parts and more. This hooks to your mower deck raise and lower etc. So technically no need for a winch if you use the oem way it was designed.

    • @DJsWorkshop
      @DJsWorkshop  Před 3 měsíci +1

      @@devin6334 with a bad back, I'd rather have the winch do the heavy lifting 😊

    • @devin6334
      @devin6334 Před 3 měsíci +1

      @DJsWorkshop gotchya! I did not realize that was the reasoning for the winch. Hopefully I don't get to needing one someday!

  • @danielgetz9508
    @danielgetz9508 Před 21 dnem

    Can you post a link for the tensioner pulley you found

    • @DJsWorkshop
      @DJsWorkshop  Před 19 dny

      www.ebay.com/item/325688972498

    • @DJsWorkshop
      @DJsWorkshop  Před 19 dny

      Look on eBay it was under wheel horse Toro tiller bracket with guard

  • @simongutierrez8867
    @simongutierrez8867 Před 3 měsíci

    Where did you get the bracket and pulley assembley

  • @ervinyutzy9959
    @ervinyutzy9959 Před 2 měsíci

    Do u no wat size your belt is

  • @jonathanbutts986
    @jonathanbutts986 Před 3 měsíci

    Where did you get your pulleys from

    • @DJsWorkshop
      @DJsWorkshop  Před 3 měsíci

      You can find them on ebay

    • @jonathanbutts986
      @jonathanbutts986 Před 3 měsíci

      I can't seem to find the front pulley assembly on ebay or the rear mount. If you could point me in a direction please. Or give me a web site to search. Plus part no# or proper name of these two parts. Front pulleys and rear mounting bracket. Thanks.

    • @DJsWorkshop
      @DJsWorkshop  Před 3 měsíci

      www.ebay.com/itm/325688972498

    • @ebinmaine
      @ebinmaine Před měsícem

      ​@@jonathanbutts986 call Wheelhorsepartsandmore.