Hi Rav, very complex and elegant design. You should be extremely proud of your work on this piece. Definitely a 5 👍 up. Thanks for sharing and take care my friend.
Thank You very much, Phil 🤝😃 Yes, I have had a vision but it tooks a lot of work to get to this point. I'm glad I didn't give up before finish. All the best my friend 👍
Beautiful piece Rav! Put the bowl in direct sunlight for a few days and the purple heart will get more purple. Something in the wood reacts with sunlight to make the color more vivid.
Thank You very much, Scott 🤝 I know about purple heart it comes purple under UV light from the sunlight but the summer heat from the Sun can destroy the bowl too and make it cracked. Slowly it should change the color when standing on the shelf. All the best my friend 👍
@@Secondlifeofwoodturning Hey Rav, I know how you feel, I always try to alternate complicated segment projects and epoxy resin castings with projects that I can make from a piece of wood. Cheers, Hans Stay safe and keep turning
Exactly! That's why I made a lot of rough turnings on green chunks last week. My next projects will be simple or with small decorations only, without cutting, gluing etc., maybe some with epoxy or paint.
Thank You, Brother 💪🤝 This project was a big unknown till I uncovered the final design. After all I have exprerience I tried to reach with 3 lasy projects. All the best, Mike 🤝🙏
Very nice I have watched you from the beginning and you have really progressed in your woodworking it’s always a pleasure to watch what you do with your project
I really appreciate Your kind words and watching from the beginning, thank You 🤝 I believe I will not stop progessing and over and over You All will be able to see my totally new ideas. All the best 👍👋
Thank You, Michael 🤝 I will start from a minus of the lathe - the legs should stand a bit weider or being haevier because the lathe starts shaking with even small unballanced pieces. Everything else works for me very good. All the best. Rav
Absolutely brilliant bowl design, Rav! This is quite a piece you made. Well done!
Thank You very much, Greg 🤝 Next one will be simple, with more turning and its natural beauty.
Hi Rav, very complex and elegant design. You should be extremely proud of your work on this piece. Definitely a 5 👍 up. Thanks for sharing and take care my friend.
Thank You very much, Scott 🤝 Will be hard to make something korę complex but I will try it for sure 💪
You are a visionary and an artist, Rav! Just beautiful! 😊
Phil
Thank You very much, Phil 🤝😃 Yes, I have had a vision but it tooks a lot of work to get to this point. I'm glad I didn't give up before finish.
All the best my friend 👍
Gorgeous work and colors and grains Beautiful
Beautiful piece Rav! Put the bowl in direct sunlight for a few days and the purple heart will get more purple. Something in the wood reacts with sunlight to make the color more vivid.
Thank You very much, Scott 🤝 I know about purple heart it comes purple under UV light from the sunlight but the summer heat from the Sun can destroy the bowl too and make it cracked. Slowly it should change the color when standing on the shelf.
All the best my friend 👍
Hello Rav it's definitely the most complex glue up I've seen and what a great result, I like that.
Thank You very much Hans 🤝 I need to take a rest from segmented projects...for awhile at least 😉
@@Secondlifeofwoodturning Hey Rav, I know how you feel, I always try to alternate complicated segment projects and epoxy resin castings with projects that I can make from a piece of wood. Cheers, Hans
Stay safe and keep turning
Exactly! That's why I made a lot of rough turnings on green chunks last week. My next projects will be simple or with small decorations only, without cutting, gluing etc., maybe some with epoxy or paint.
Watched you cut the pieces and could not envision the outcome. *Brilliant* is all I can say 🙂 Rob
Thank You very much Rob 🤝 Even I was not expecting so good result on it. As I said, I have more lucky than I'm smart 😁
Take care my friend 👍
Most complex for sure. Certainly most beautiful Rav ! Be proud. Be very proud !!! Thanks for sharing. Take care. -Mike
Thank You, Brother 💪🤝 This project was a big unknown till I uncovered the final design. After all I have exprerience I tried to reach with 3 lasy projects.
All the best, Mike 🤝🙏
@@Secondlifeofwoodturning 👍😎
Beautiful bowl with a stunning design.
Thank You very much, Ron 🤝😃
Very nice I have watched you from the beginning and you have really progressed in your woodworking it’s always a pleasure to watch what you do with your project
I really appreciate Your kind words and watching from the beginning, thank You 🤝 I believe I will not stop progessing and over and over You All will be able to see my totally new ideas.
All the best 👍👋
Neuvěřitelný kousek, skvělý projekt a kombinace dřeva. Super nápad. Těším se na další videa.
Hello neighbour from South 👋Czech or Slovak? I'm from Poland.
Thank You very much for Your kind words 🤝💪
Great pattern. I love it!
Thank You, Gordon 🤝💪
Lovely pattern inside it.
Thank You, J 🤗💐
Yvw
Beautiful bowl, Rav. Great work. 👍💪😊
Thank You very much, Rob 🤝😃
Rav, that is so gorgeous...love it!
Thank You very much my Dear 🤗💐
Great work! Thanks for sharing with us!
Thank You very much, John 🤝😃
Gorgeous! You said you are more lucky than smart but you are both!
Thank You very much, Leigh 🤝
Finaly You have found a middle between my lucky and being smart. You are smarter than me 💪
You have outdone yourself...a truly beautiful and unique piece...stay safe...press on 😎 Joe
Thank You very much, Joe 🤝😃 Yeah, I almost stand on my head to do it 😁
Stunning results from your hard work. Very, very nice. Thank you for sharing.
Thank You very much, Hubert 🤝
Pretty nice,👍👍👍👍
Very nice Rav!
Thank You very much, Brian 🤝
Beautiful work
Thank You, Gaetan 🤝😃
on small trip to U S A you video pictures you go symposiums of wood-turning
Those videos were recorded before a trip to USA. New videos with new ideas will come very soon
Zdravím,moc pěkný projekt. Zajímalo by mě kde nakupujete dřevo . Jinak jsem Slovák źijici v Česku
Class bit of turning it looks unreal .i have the same lathe as you what do you think of yours thanks Michael
Thank You, Michael 🤝
I will start from a minus of the lathe - the legs should stand a bit weider or being haevier because the lathe starts shaking with even small unballanced pieces. Everything else works for me very good.
All the best.
Rav
Hello Rav, 😇👍👍👍
Hi Joe 👋
Thank You very much 🤝😃
Mfg.