Wow im so glad I found your video im getting ready to build my K580 soon. Just got the last few things so im ready to build, but im using a scorpion Motor and ESC. And the spectrum FC6250HX with one of the same satalites you have. Im using the same upgraded belt tensioner, but Ibhave KST servos..Thank again for the video it really helps people loke me...
Awesome! That is the whole point of my videos is to help people. I’m glad you find it useful! Part two will be out Monday! The 6250 is a good FBL! I have heard good things about them and I’ve only messed with the mini and not the full size. But I like all the programming to your radio for forward programming is super nice!
There great its always good to see how someone thats knows what their doing build one. Im going to start my build tonight and get caught up to where your at. Thanks again for the help!!!
The tip about the metal servo washers is great! I am doing this build with the same Torq servos and they only come with the rubber grommets. If I hadn't watched your video I wouldn't have known about them. Thanks!
Hi @Andy G. I found them on HeliDirect. mini: www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-mini-servos standard: www.helidirect.com/products/torq-replacement-servo-washers-for-xpert-bk-fullsize-servos-1 Hope this helps.
Yes, I waited for you next upload. Can't wait for your final conclusion between the Raw and Kraken because I have been contemplating between these 2 and can't make up my mind.
I’m really excited to try them both, so I don’t think anything can beat the RAW as far as flight performance and power to weight ratio. But Both the RAW 580 and Kraken 580 will have the same motor ESC and battery setup so power to weight will be very similar so that will give a great test to air frame design.
Little late to the party, but I have been watching the SAB 580 build videos you have. I ordered one last week form HD, it is on back order, but from all the videos and “sleeping” on it for a few days. I knew I would have been mad at myself for missing the 20% off, you just can’t beat it, so I got the 580 kit and I’m going to build it with the same servos, motor etc in the videos. I’ll be buying everything else slowly in the coming month, looking forward to it!
Awesome! The RAW 580 is my favorite heli ever made. Such a. Incredible heli and flys amazing! I’ve got a electric and nitro 580! I hope the videos are helpful and help you along your build! If you have any questions please ask and I will do my best to help with what I can! Good luck!
As a relatively new RAW first-owner, I am very interested in your Kraken impressions. I'll be posting a quick pre-build video this evening. KSE #2 is unboxed and the build table is prepared. Their new light-weight 700 optimized for lower head-speed is also super interesting now. It's really built to do the kind of flying that I might be doing. I'll never stress out a RAW or a Kraken. Those Krakens are good looking birds, though. Now that I own one, I am really quite taken with the SAB products.
I am very interested to see as well. I have flown traditional goblin helicopters in the past and they were never particular my cup of tea/flying style. They always flew pretty heavy and I was not a fan of the full body. But! The Kraken 580 looks very promising and it will be a great comparison against the RAW 580 since they are pretty much identical set up servos FBL unit motor ESC battery. The light weight RAW 700 looks great! I really like that it is a 6S 700! Also! Have you seen the latest release!? Well a Teaser! SAB is coming out with a RAW 420!
Hi, what are the part numbers for the Torq servo spacers you mentioned in the beginning? You mentioned a larger spacer for the rudder and for the cyclic. I am ordering my kit from Helidirect and I don't see those Torq spacers. Thanks!
These are for cyclic www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-mini-servos?_pos=1&_psq=Torq&_ss=e&_v=1.0 This is for tail, www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-fullsize-servos?_pos=2&_psq=Torq&_ss=e&_v=1.0 On heli direct if you just type in Torq in the search bar they are the first things that pop up. Remember if you are going with full size on cyclic you will need the full size servo spacers. But the way it comes out of the kit, mini on cyclic and full-size on tail.
www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-fullsize-servos?currency=USD&gad_source=1&gclid=EAIaIQobChMI57P6htmphAMVSkt_AB1w8w-FEAQYASABEgKa5_D_BwE For the tail
Unfortunately not that I have found. You can build without the grommets and then add them later. I have built them both ways with the carbon plates and the grommets.
@@westhobbiesrc8051 yeah. I already mounted the servos with the plates and im not happy with it. Thanks ill just add them later if they come back in stock.
No the kit does not come with any servo horns. I recommend using whatever horn comes with your servo. You can get the SAB specific horns if you like completely up to you. I know what you mean! LOL I would not let it hold me up either! But I’ve got box’s of horns.
There is a few ways you can do it. You can buy servo center tool but Hass to be one that can do pulse/frequency or plug it into your FBL unit powered up or mechanically by rotating the servo arm from end to end see where the arm stops and then adjust the arm so you get a full 120° travel and then put the arm in the middle and pull it off.
@@jasonbriggs4625 I run two DSMX satellites, if your running a Hobby wing ESC and want telemetry you can run a SRXL2 and two DSMX satellites and get full telemetry. I have a video coming out Monday on a full explanation of the SRXL2 and how to wire it into the iKon. On the Piuma 700 build part 4.
@@westhobbiesrc8051 ok on my k580 I'm running 6s setup with the following HobbyWing 120 ESC 3 KST BLS815 v2.0 1 KST BLS 805X Xnova 4025-1120kv 1.5y B shaft Pulse Batteries 5000mah Ikon 2 with Bluetooth
Wow im so glad I found your video im getting ready to build my K580 soon. Just got the last few things so im ready to build, but im using a scorpion Motor and ESC. And the spectrum FC6250HX with one of the same satalites you have. Im using the same upgraded belt tensioner, but Ibhave KST servos..Thank again for the video it really helps people loke me...
Awesome! That is the whole point of my videos is to help people. I’m glad you find it useful! Part two will be out Monday! The 6250 is a good FBL! I have heard good things about them and I’ve only messed with the mini and not the full size. But I like all the programming to your radio for forward programming is super nice!
There great its always good to see how someone thats knows what their doing build one. Im going to start my build tonight and get caught up to where your at. Thanks again for the help!!!
@@mateozorro2461 thank you! I greatly appreciate it! Hope it helps you fly though the build process!
Best heli i have tried. It’s just perfect.
In the 580 class ofc
Excited to try it! I can’t see it beating the RAW 580 in my eyes but we will see!
The tip about the metal servo washers is great! I am doing this build with the same Torq servos and they only come with the rubber grommets. If I hadn't watched your video I wouldn't have known about them. Thanks!
Hi Jim. Do you have a link on where to order the servo washers/spacers? I found a few on Amain but not sure which ones to use. Thanks.
Hi @Andy G. I found them on HeliDirect.
mini: www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-mini-servos
standard: www.helidirect.com/products/torq-replacement-servo-washers-for-xpert-bk-fullsize-servos-1
Hope this helps.
Yes, I waited for you next upload. Can't wait for your final conclusion between the Raw and Kraken because I have been contemplating between these 2 and can't make up my mind.
I’m really excited to try them both, so I don’t think anything can beat the RAW as far as flight performance and power to weight ratio. But Both the RAW 580 and Kraken 580 will have the same motor ESC and battery setup so power to weight will be very similar so that will give a great test to air frame design.
Little late to the party, but I have been watching the SAB 580 build videos you have. I ordered one last week form HD, it is on back order, but from all the videos and “sleeping” on it for a few days. I knew I would have been mad at myself for missing the 20% off, you just can’t beat it, so I got the 580 kit and I’m going to build it with the same servos, motor etc in the videos. I’ll be buying everything else slowly in the coming month, looking forward to it!
Awesome! The RAW 580 is my favorite heli ever made. Such a. Incredible heli and flys amazing! I’ve got a electric and nitro 580! I hope the videos are helpful and help you along your build! If you have any questions please ask and I will do my best to help with what I can! Good luck!
Hi thanks 4 posting vid just starting to build 580 today great help . Amazing channel really helpfully 👍🏻👍🏻👍🏻
Hello! Thank you! I’m glad the videos are helpful and helping with your build!
LOL, yep just caught it, 13:15 in. Using your videos and the manual to build mine. Using the T-box to center the servos sure is nice, thanks again.
Sweet love your builds man.
Thanks man! Appreciate it!
As a relatively new RAW first-owner, I am very interested in your Kraken impressions.
I'll be posting a quick pre-build video this evening. KSE #2 is unboxed and the build table is prepared.
Their new light-weight 700 optimized for lower head-speed is also super interesting now. It's really built to do the kind of flying that I might be doing. I'll never stress out a RAW or a Kraken. Those Krakens are good looking birds, though. Now that I own one, I am really quite taken with the SAB products.
I am very interested to see as well. I have flown traditional goblin helicopters in the past and they were never particular my cup of tea/flying style. They always flew pretty heavy and I was not a fan of the full body. But! The Kraken 580 looks very promising and it will be a great comparison against the RAW 580 since they are pretty much identical set up servos FBL unit motor ESC battery. The light weight RAW 700 looks great! I really like that it is a 6S 700! Also! Have you seen the latest release!? Well a Teaser! SAB is coming out with a RAW 420!
Hi, what are the part numbers for the Torq servo spacers you mentioned in the beginning? You mentioned a larger spacer for the rudder and for the cyclic. I am ordering my kit from Helidirect and I don't see those Torq spacers. Thanks!
These are for cyclic www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-mini-servos?_pos=1&_psq=Torq&_ss=e&_v=1.0
This is for tail, www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-fullsize-servos?_pos=2&_psq=Torq&_ss=e&_v=1.0
On heli direct if you just type in Torq in the search bar they are the first things that pop up. Remember if you are going with full size on cyclic you will need the full size servo spacers. But the way it comes out of the kit, mini on cyclic and full-size on tail.
@@westhobbiesrc8051 Thank you for the links and the quick response!
@@JonsRC anytime! Enjoy the build!
Why the green compound on the servo balls instead of blue?
hi Jeff, do you have the part numbers for the servo spacers/washers?
finding it very hard to find in uk for my kraken 580 build
Hello! I don’t have a part number, I’ll see if I can find one! They are just Torq Servo washers or grommets
www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-mini-servos
www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-fullsize-servos?currency=USD&gad_source=1&gclid=EAIaIQobChMI57P6htmphAMVSkt_AB1w8w-FEAQYASABEgKa5_D_BwE
For the tail
thank you Jeff :D@@westhobbiesrc8051
Will I need these servo spacers for my upcoming 570 Drake?
Yes they are used on any Torq servos. Or really any servo is you want a perfect zero swap/movement fit.
@@westhobbiesrc8051 to bad they don’t come with them. I ordered the bls2208
Where did you purchase the servo lockers? Thanks!
www.helidirect.com/products/torq-replacement-servo-washers-for-torq-kst-mini-servos?_pos=1&_psq=Torq&_ss=e&_v=1.0
Is there a good alternative to the torq servo washers? Im putting the same servos in my 580 but cant get the torq washers
Unfortunately not that I have found. You can build without the grommets and then add them later. I have built them both ways with the carbon plates and the grommets.
@@westhobbiesrc8051 yeah. I already mounted the servos with the plates and im not happy with it. Thanks ill just add them later if they come back in stock.
@@DetoursRC do you have a 3-D printer? I’m pretty sure there is a file out there I will check.
@@westhobbiesrc8051 I dont. Thanks though.
@@westhobbiesrc8051 helidirect got them stocked mine r on the way!😉
Does the kit come with the the plastic sab servo horns. Just ordered my raw 580 and I'm not letting 4 servo horns delay my build... 🤣
No the kit does not come with any servo horns. I recommend using whatever horn comes with your servo. You can get the SAB specific horns if you like completely up to you. I know what you mean! LOL I would not let it hold me up either! But I’ve got box’s of horns.
How did you center the servos before you mounted it
There is a few ways you can do it. You can buy servo center tool but Hass to be one that can do pulse/frequency or plug it into your FBL unit powered up or mechanically by rotating the servo arm from end to end see where the arm stops and then adjust the arm so you get a full 120° travel and then put the arm in the middle and pull it off.
@@westhobbiesrc8051 I also have the ikon 2 with BT and what receiver work best with it. I'm using either my nx10 or DX9 Transmitter
@@jasonbriggs4625 I run two DSMX satellites, if your running a Hobby wing ESC and want telemetry you can run a SRXL2 and two DSMX satellites and get full telemetry. I have a video coming out Monday on a full explanation of the SRXL2 and how to wire it into the iKon. On the Piuma 700 build part 4.
@@westhobbiesrc8051 ok on my k580 I'm running 6s setup with the following
HobbyWing 120 ESC
3 KST BLS815 v2.0
1 KST BLS 805X
Xnova 4025-1120kv 1.5y B shaft
Pulse Batteries 5000mah
Ikon 2 with Bluetooth
@@jasonbriggs4625 great setup, you can one wire from the hobby wing to the 5 port of the Ikon and get full telemetry with a SRXL2
Einmal bitte alle Bau teile reinschreiben wäre echt lieb