Based on WPS, the current is 160~180A and the voltage is 17~18V, but the actual output is different for each machine, so it needs to be adjusted according to the situation. The voltage is used a little higher than the reference value. It need to be adjusted so that you can feel the arc spreading, not the feeling of the wire being sucked into the arc.
Hello sir i am from bangladesh...Cai i have your contact info?...i am learing 3g welding for deligate interview for south korea...visa type E7 and i am still learning i have some provlem so i want to discuss about those problem with you...please reply i watched every 3g related video u uploaded 🥺🙏
![FCAW 3G : Wide Gap Welding (CO2 용접기로 와이드 갭 용접하는 방법) [sub : ENG]](http://i.ytimg.com/vi/kvZunUjcoNY/mqdefault.jpg)
perfecto mi amigo.
Terimakasih sudah berbagi ilmu pengelasan 3F semoga bermanfaat untuk teman-teman kita semuanya amin salam sukses selalu from Indonesia
terima kasih atas komentarnya Selalu bekerja dengan aman.
Itu adalah pengelasan dengan posisi 3G ,
엄청 잘 하셨는데... 빽만 잘내면 ㅜㅜ 솔직히 나머지도 쉽자나요 ㅜㅜ 초보자는 웁니다... 저는 진행중에 자세가 토치각이 계속 틀어지네요..
Excellent technique
Thank you for your kind comments.
Good job
❤❤❤
많은도움이됩니다.1p.2p.3p전류.전압도영상에 추가해주시면 더욱더 도움이될거같습니다.감사
전류, 전압은 WPS에서 권장하는 기본값이 있지만, 실제 용접기의 출력이 세팅값과 일치하지 않는 경우가 많아서 감으로 적당한 값을 찾아야 합니다. 말씀해 주신 내용 참고해서 다음에는 관련 영상을 만들어 보도록 하겠습니다.
@@weldingmaster238 답글감사합니다.플랜트업종 초보 제관용접사입니다.현장용접은 무난하게하나 시험이 부담스럽습니다.요즘은 아크.씨오투.티그까지...요즘은 티그6지로 시험을봅니다.어렵네요.감사
고생이 많으시네요. 좋은 결과를 응원합니다.
Very good👍👍👍
Thank you!!
Lớp lót đầu tiên đi thẳng hay đi răng cưa vậy bạn
👍
❤❤❤❤
And please reply what is the proper angle Between the torch and the plate of all pass [ Root pass, hot pass & caping pass ]
In 3G welding, all passes can be don with one angle. It is not recommended to change the torch angle every time.
Goods
루트 패스에 대한 올바른 전류 및 전압 설정을 어떻게 결정할 수 있습니까?
전류 180~200A, 전압 20~21V 정도 됩니다만, 상황에 따라 달라질 수 있습니다.
Bro do u use higher current & voltages according to normal mig machine??
I use higher current and voltage compared to normal setting.
Hello Brother.. How much A and V did u choose for this welding?? Can u please tell me..
Current 180~200A and Voltage 20~21V. But it can be changed depending welder and welding machine.
What's the proper angle of the nozzle, slightly upward or downward ? Thanks 👍🏻
Slightly downward. Thank you.
Under cut??
Ive learned normal travel is the key
Also looks better
You can weave tho but it's more difficult to get a uniform weld and a good penetration
It's seems your root pass got undercut sir?
Thank you for your comments. It looks like that in the video, but it's not actually an undercut.
Voltaje y amperaje ?
Based on WPS, the current is 160~180A and the voltage is 17~18V, but the actual output is different for each machine, so it needs to be adjusted according to the situation.
The voltage is used a little higher than the reference value. It need to be adjusted so that you can feel the arc spreading, not the feeling of the wire being sucked into the arc.
Under cut
It looks like under cut, but it was actually OK. Thank you for your comments.
파이널..언더컷..탈락..백비드 한쪽면 언더컷.. 중공업시험기준..전류를약간올리시던지 전압을 조금내리시는게...
조언 감사합니다.
갭 얼마로 하셨나요?
3G 용접 갭은 보통 5mm로 합니다.
3g 갭은 5mm가 적당합니다.
빽비드가 가장 잘나오는 갭입니다.
Cháy hết chân hàn rồi.
How much cm gap
It's about 0.5 cm.
용접 와이어의 크기는 얼마입니까
1.4mm 입니다.
Hello sir i am from bangladesh...Cai i have your contact info?...i am learing 3g welding for deligate interview for south korea...visa type E7 and i am still learning i have some provlem so i want to discuss about those problem with you...please reply i watched every 3g related video u uploaded 🥺🙏
Because I teach classes all day, personal contact is difficult. Please understand.
Tôi cũng như bạn và tôi cũng đang học e7_3 cùng cố gắng
파이널비드가 좀아니내요
빽낼때도 티그리스생각해서 빽을내면2패스에서 느정도니꾸를 채울건가생각하시고 하면 파이널비드 예쁘게잘나옵니다
네, 조언 감사드립니다.