Freewing Me 262 V2 with 3D printed mods for cockpit, flap and landing gear
Vložit
- čas přidán 10. 09. 2024
- You can download and build you own mods cockpit and flaps (not landing gear) here:
cults3d.com/en...
These parts are designed to fit the Me 262 by Freewing.
The content is the cockpit, including the pilot and the molds for the canopy and the flaps as arch flaps.
Because of the high level of detail, all parts of the cockpit and the pilot can only be printed using the SLA method or using the FDM method with a nozzle diameter of 0.2 mm using standard PLA.
The flaps can be printed using the FDM process with a nozzle diameter of 0.4 mm and LW-PLA.
In order to be able to manufacture the hood, the corresponding negative mold must first be printed out and then prepared accordingly in the GRP manufacturing process and then manufactured.
If desired, a hood for 3D printing is also part of the package.
For the glass for the hood, the deep-drawing mold has to be printed and ground and then deep-drawn with a 0.6mm PETG plate in the oven.