Also here to say thanks. I was struggling to screw in those last two screws, but then you pulled out the screwdriver and realized they gave me one too. Duh!
The manual shows the half black screws with black side up in the manual, made no sense to me, thanks fpr your video, now I'm sure they go with black side downwards!
I tried but now I am using asrock b650e pg riptide wifi motherboard. This has heatsinks which is very close to the cpu socket. So I need mounting as you are using in ag620. Ag500 is having a square mounting bracket which is not getting enough space.
its just cpu fan power pin. If you bought rgb or argb version, you should should connect it to the respective 3pin(argb) , 4pin(argb) connectors. and control the lighting via motherboard software
I am having same setup as you 😁. Just that I am using ag500 as the cooler. Motherboard, ram, cpu are same. Which gpu are you using? Amazing frame rate.
I am considering building it with B650M D3SH, since it's two fans how did you manage RAM space. I am also getting 7600 NON X version but will overclock it soon. Also does the AG620 come with a cable splitter out of the box or do I need to buy one?
Здравствуйте. Скажите, пожалуйста, не будет ли проблемы с установкой оперативной памяти с этим кулером на эту мат.плату ASUS TUF GAMING B660M-PLUS D4? А точнее, не упрется или оперативная память в радиатор.
Excellent video you saved me so much time! Thanks!!!
Glad it helped!
Also here to say thanks. I was struggling to screw in those last two screws, but then you pulled out the screwdriver and realized they gave me one too. Duh!
LET'S ZGOOOOOOOOOOOOOOOOOOOOOOOOOOO ME AND MY FRIENDS HAVE BEEN STRUGGLING FOR ABOUT AN HOUR AND WE FOUND THIS VIDEO LETS ZGOOOOOOOOOOOOOOOOOOOOOOO
Very simple cooler mounting :)
It sure is!
I have the AK version of this and its a good cooler. Thanks for ther video mate. 😋😇
Cool 👍
same, saveds SO MUCH TIME
This is perfect for my first PC build. Straight to the point. Thanks 🫡
Ure best saved me!!
Thank you.
Welcome!
I need a amd5 install guide
Thanks brother!
do you know if the cooler fits with corsair vengeance 2x16gb ddr5 as well? or do i need to go for a smaller RAM in terms of height
fits, just mounted this bad boy on with corsair 2x16gb ddr5 !
@@cristina-fg5xt thanks dude! New pc build or upgrading?
dope appreciate u
Appreciate that
The manual shows the half black screws with black side up in the manual, made no sense to me, thanks fpr your video, now I'm sure they go with black side downwards!
Is ag620 good with i5 13500?or liquid cooler is needed?stock cooler valorent temperature goes 84/86°C. I play games a lot
Ag620 is fine for 13500
Can I use it with ryzen 7 5800x?
Yes enough
ЧЕЛ ЛУЧШИЙ ПРОСТО
I am having deepcool ag500 but the mounting bracket is am4/am5 which is not working with my b650e motherboard.
Need to buy a am5 mounting bracket.
It should work. try again
I tried but now I am using asrock b650e pg riptide wifi motherboard.
This has heatsinks which is very close to the cpu socket.
So I need mounting as you are using in ag620.
Ag500 is having a square mounting bracket which is not getting enough space.
кто скажет что еще идут за провода от каждого вентилятора и куда их подключать. Помимо тех которые подключаются к cpu fan
this is not argb or rgb version. only single cpu fan wire which I showed that
Hello can i only use single fan it cause the front fan is taking space for ram.
yes you can. And for the ram clearance issue, you can life the fan little higher until it touches your side panel
how to know where to join the wires and how to join them ?
its just cpu fan power pin. If you bought rgb or argb version, you should should connect it to the respective 3pin(argb) , 4pin(argb) connectors. and control the lighting via motherboard software
I am having same setup as you 😁.
Just that I am using ag500 as the cooler.
Motherboard, ram, cpu are same.
Which gpu are you using?
Amazing frame rate.
It's 6800xt
What temps you getting. I'm facing high temperature issue at >80% load now
Maybe cpu surface not in intact with the cooler. Am4 socket issue ?
Yes, I am also facing high temperatures. Waiting for cpu change in next year.
AMD cpu are very hot. And once it crosses 85c then it throttles badly.
I am using rtx 3070 but that gets max 70-75fps in ray tracing medium at 1440p resolution.
Poor game optimisation.
Can't tigheten the screw what to do screw only rotating
Remove everything and try again.
Hi friend. Is AG620 overkill for a 5700G? I already have an AG400 and now have the chance to upgrade to AG620 for a good price
It's not overkill. You can use
@@OdinHardware Many thanks!
Ak620 am 5 support??
Yes
Am having B650M DS3H, will deepcool AG400 plus fit into it?
Yes
I am considering building it with B650M D3SH, since it's two fans how did you manage RAM space. I am also getting 7600 NON X version but will overclock it soon.
Also does the AG620 come with a cable splitter out of the box or do I need to buy one?
It is okay with ram clearance. And also you can adjust the fan height according to your ram height. But it may protrude when closing side panel.
Yes it come with fan splitter cable
planning to buy this for 7600x, will it be enought? without curve optimizer?
Yes fine.
How is the motherboard?
It's great, for the price
@@OdinHardwareawesome video thanks how is it with 7800x3d
Здравствуйте. Скажите, пожалуйста, не будет ли проблемы с установкой оперативной памяти с этим кулером на эту мат.плату ASUS TUF GAMING B660M-PLUS D4? А точнее, не упрется или оперативная память в радиатор.
No interferences in most cases
But with some high profile modules you need to slightly readjust the fan height (which is near the ram module)