Yaesu FT-450 transmit problem and simple solution
Vložit
- čas přidán 9. 09. 2024
- My Yaesu FT450 seemed to develop a "fault" whereby it refused to transmit. Edmund M0MNG explains what caused the problem, and uncovers a previously-unknown and actually quite neat safety feature!
Merry Christmas and Happy New Year 2016!
Yep…Iv'e done the exact same thing with my FT450D and MD100. It was a relief when I realized what I had done.
Hello , I hope this message finds you very well . After obtaining my General license , back to back to back I experienced many inexplicable failures . Upon experiencing the most recent failure last night , this video , after hearing , no , immediately , the words from you , incredible loss of your Father . ALL was put into perspective , is the hobby incredible , yes , are the radios fascinating and engross our attention , yes . The sum of it ALL means absolutely NOTHING in comparison to the life and interactions with a LOVED ONE . Immediately , my Soul was calmed , immediately , ALL , was forced into its proper place . I know this video was produced for the stated purpose , however , it was explaining so much more . Prayers unto YOU and your Family , let your heart never “sink a little bit “ , Godspeed unto your Father , simply HE is seated at the right hand , DAD is in a Kingdom that has NO END . Again , Godspeed Old Friend .
Tnx for the info Edmund - I might be buying a FT-450 pretty soon (again), so this is a great thing to be aware of.. 73.
You won't regret it, they are lovely little radios for HF/50MHz. My one is sitting in front of me right now, and although I don't use it as much as some people would, it is still going strong and in perfect working order after nearly seven years! I'm very pleased with mine and I hope you will get as much pleasure out of your new purchase as I still do out of my FT-450. 73.
Great story about your Dad, I would not part with it either, I had a FT450 and really liked it, I do recall it also not transmitting if you had a big mismatch in the antenna SWR to protect the radio.
Thanks for the video, I knew that's what you where leading up to... I've done it myself many times with my MD-100 on my FT450, FT450D and FTdx1200. First time I panicked like you did.73 Roy ZL1LK
A good example of know your equipment, sorry about your dad. Good vid . Thanks
Hello Ed,
Thanks for your feedback on that "safety" problem. I've got the same equipment here: FT450d + MD100, I never touched the PTT hold on the top of the mic (I always used the PTT and PTT hold on the base) so it never happened to me.
I think it could happen on all modern Yaesu like FT450, FT950 and FTDX... (not sure for the FT-817/857/897).
I realy enjoy my FT450D and I'm very happy with it. The reception is fine on SSB/CW, nice DSP,... I like to operate this rig.
73's de Adrien
PS: à bientôt sur l'air pour un petit QSO...
I for one, enjoyed your video!
I know what your saying about sending stuff back Ed....I feel exactly the same....my 450d came back from reapart a real mess....they replaced it for a new one in the end.
No MD100 here but breezing through videos but that would make a nice desk mic always used hand mic for most communications ham radio and before. I purchased a ft 450 used I love the radio but tecieve alto of dwelling noise. I take else where or Mobil ok. Few things about the regular ft 450 red buttons I wonder if its possible replace keypad with white buttons from D series? 2# Radio is finicky turning on with 12-15 amp supplies even if voltage is 14.5 voltsxwont turn on but at 12.4 vdc off a gel cell battery turns on or a 20 amp lunar astron supply it works everytime? I have not seen anything onvinternet to explain. 3# the transmit alc ( not the receive alc) cuts the Raf power to much on below 50 watt setting this needs turned off is there acservice menu to adjust TX ALC? Anyways that is all thanks for tip on the 450.
New to this game, would you recommend FT450 as a starter
TL;DR: He had the mic button pressed when he turned it on. My FT450D problem... after running it mobile in the Texas heat, the VFO encoder started skipping, made the rig almost unusable. After some thought, I guessed that the heat had caused the silicone lube to flow down the encoder shaft and gum up the optical encoder... 40$ later I was able to confirm this. Don't leave the radio face upwards in the heat! I tried taking the encoder apart but there's no way to get it back together, the wheel is melted onto the shaft... certainly worth the price for the new part.
Thank you for the TL;DR. After 5 mins of waffle I paused the video and checked the comments for what the actual problem was.
Great vidio.just found your channel.i have just bought a 450 do u still use yours
Basically the title of the video, 'FT-450 transmit problem' is completely wrong! The radio has no 'transmit problem'... The only 'problem' is that you are unfamiliar with the buttons on your own desk mic! I have a 450D and the same desk mic. I knew before I plugged in the mic what all the buttons did - including the Tx lock function on the detachable desk mic... 🙄
Saludos por favor lo puede transmitir en español, no hablo Inglés
TEN OUT OF 12:50 MINUTES TO LET YOU KNOW HE HAD A SWITCH TURNED ON?
Thoughts and prayers.
thats funny when my dad went i got a new 450d and i have had it for 4 years that is a record as i never kept a rig for more than 6 months tops,i call it dads radio .. jeff.. m0prf..
If you would like to save 12mins of your life and not listen to endless blather, just hit transmit on your mic and it will stop the intermittent transmit.
So right, it seems to be a common issue with UK model humans. I wonder if it's a flaw, or design feature? Maybe send one off for factory repair and see....😅
Thirteen minutes to tell me to push a button??
Short videos best.
Start at 9:25 and you'll miss the inconsequential bull$#!+.
Thank you for your information.
You could of cut the waffle and made it 1min long.
Never mind, thank you anyway.
get to the point !!!!!
Patience, my friend, is a virtue! :-)
Finally at 9 min+ he gets to the 10 sec point. LoL.
really Zzzzzzzzz
9:28
This video was not necessary
And your comment was necessary?
Lost my will to live....
Oh dear. What a pity.
nine minutes to tell us the fault, which wasn't a fault..!!!
It's a hard life, innit.
That was a lot of talk to reveal a simple thing....
You spoke for almost 10 minutes without explaining what the issue was and how to fix it. As an instructional video, this is terrible. Thanks for sharing, but seriously, talk less and explain more.