Raspberry Pi 5 tablet with NVMe. Raspad 3
Vložit
- čas přidán 7. 09. 2024
- Raspad 3 with Raspberry Pi 5, official pi 5 cooler and nvme upgrades
Battery life test
Raspberry Pi 5 tablet with NVMe drive. Raspad 3 #Raspberrypi5 battery life test
• Raspberry Pi 5 tablet ...
As an Amazon Associate I earn from qualifying purchases
X1000 x1001 x1002 nvme boards
US
X1000 amzn.to/3vJept2
X1001 amzn.to/4b6ISBm
X1003 amzn.to/48VelEE
UK
X1001amzn.to/3vOKLm6
X1002 amzn.to/427KMxE
Amazon US & other Countries Links
Samsung pro plus 128 micro sd amzn.to/410mncQ
Kingston a2 64gb amzn.to/33HBrCD
Sandisk pro sd card amzn.to/3Pc0AJI
ICE Tower Cooler for Raspberry Pi 5 amzn.to/3siJ92Q
Usb C to C power display cable 100W amzn.to/3qoXsxZ
Usb C coupler / joiner amzn.to/47eMWNg
Pi 5 compatible case amzn.to/3PrrLAk
Pi 5 compatible cluster case amzn.to/46rvSDn
Pi 5 compatible fan amzn.to/3EUnK2r
Micro hdmi cable amzn.to/3FmtFgP
3.5 audio usb amzn.to/45xa08M
Kioxia Micro sd card amzn.to/3rNpGXO
Brave eagle Micro sd card amzn.to/46Vgxex
Samsung evo select 128gb micro sd amzn.to/3Qn4jpx
Crucial SSD amzn.to/46dMOO8
Orico usb hub amzn.to/462DNah
Samsung Bar usb drive amzn.to/45IgMcF
My Pi 4 case amzn.to/3Pkes4t
Raspberry Pi 4 amzn.to/46pb5Av
Mini mouse keyboard amzn.to/3ExMrS3
Logik K400+ keyboard amzn.to/3BUiDN5
My capture device Avermedia GC513 amzn.to/3G1LPDQ
Wimaxit 14” Touchscreen amzn.to/3kPDgRl
My Amazon UK store
www.amazon.co....
Amazon UK Links
Samsung pro plus 128 micro sd amzn.to/46TK2x3
Sandisk pro sd card amzn.to/3P5HHIk
Kingston 64GB A2 amzn.to/2NTnkPm
Ice tower cooler Pi 5 amzn.to/3MAPL3m
Usb C to C power display cable 100W amzn.to/3D8GRWV
Usb coupler / joiner amzn.to/3QIDoDN
Pi 5 compatible cluster case amzn.to/3ZFVxpF
Pi 5 compatible case amzn.to/3ES7Q8X
Pi 5 compatible fan amzn.to/3tc2RgH
Samsung evo 128gb sd card amzn.to/3Sczfdg
Micro sd card Kioxia amzn.to/3Q5LnKq
32GB micro sd Lexar amzn.to/3tEgLZ6
HDMI to micro hdmi amzn.to/3tGq3UA
3.5mm audio to usb amzn.to/3FpS9G0
Samsung Bar usb drive amzn.to/3sRqbjI
Raspberry Pi 4 amzn.to/3LeeIAL
pi camera 2.1 amzn.to/46rtfBh
Mini mouse keyboard amzn.to/3LgPn9z
Mini remote amzn.to/3ZbINa0
Official Raspberry Pi power adapter black amzn.to/3pHyiJj
Crucial 240GB SSD amzn.to/37LLc0V
YCCTEAM Xbox 360 Wireless controller amzn.to/38to6ya
my pi 4 case amzn.to/3ZfFyyv
Logitech K400+ keyboard trackpad amzn.to/3otsF0...
My capture device Avermedia GC513 amzn.to/2MnbXhW
Wimaxit 14” Touchscreen amzn.to/3sOpDLg
my videos
Raspberry Pi 5 Tablet. Now with Cooling and KDE Plasma mobile
• Raspberry Pi 5 Tablet....
Raspad 3. One Tablet, Multiple Operating systems. Windows 11, Linux, Android & ChromeOS
• Raspad 3. One Tablet, ...
PCIe NVMe for Raspberry Pi 5. Geekworm
• PCIe NVMe for Raspberr...
My Playlists
Everything Raspberry Pi. Over 650 Videos
• Everything Raspberry P...
Raspberry Pi NEWS
• Raspberry Pi NEWS
Battery life tests with nvme drive in addition to the one mentioned in the video.
Sd card vs nvme
Just 720 CZcams 2:05.25 with nvme
Just 720 CZcams 2:14.17 with sd card
Around 9 minutes more use on sd card over nvme
Hi Lee! Here is one solution : sudo rpi-eeprom-config --edit , BOOT_ORDER=0xf164 . It worked for me. Thank you for the
the great work!
I have the Raspad and despite some problems was one of the best investments for a rpi4, and knowing the Rpi5 is compatible with it is an amazing new
this guy is my favorite tech youtuber he doesnt just fill his videos with bloat for youtube watchtime he actualy just gets to the point quickly
"... how did I loose that Screw!" - totally deserves a thumbs up... everyone been there, or will be shortly
I used to lose screws; then I bought a box of assorted size laptop screws.
Man! That's so nice! I always wanted to build a Raspberry pi tablet, overclocked but with sufficient cooling and bundled with an nvme ssd. After watching your videos and realizing that the Pi5 can play PS2 & Gamecube games and also thinking that this device is finally powerful enough to play some old PC titles through emulation. I would love if you can make a video with an overclocked pi5 tablet+ssd and test some Box86/Box64/DOSBox emulation, maybe some Steam tests. You do it or not, i want to thank you for the great content of yours. It's always very good quality and a ton of useful info.
Thanks Lee for giving ideas on making my RasPad3 even more useful. I normally use it to run my SDRPlay RSP1A or my Hauppauge TV dongle hooked up to my old 20: HP monitor to watch local AST1A TV channels in my bedroom, so having a better CPU will definitely help with those activities. Therefore, I never change operating systems that much, but from your video I can still hookup a SDCard Reader to offload recording from the radio or TV when I feel like it…😊!
The only snag is waiting for my dealer to have the 8Gig model in stock..😮!
In the meantime, I am in the process of purchasing ClockWork Uconsole with the Raspberry Pi IV Lite. I just hope it will arrive before the 3 months shipping that other CZcams viewers have reported…😢!
Have a great day!
I call that a RESULT! I've still got the original RasPad (which doesn't fit a Pi5) but I can see I'll be tempted to upgrade if they revise it much further.
I have my Rsspberry Pi 4 with a Samsung T7 external usb SSD in my Raspad 3. There was just enough room for the SSD over the interconnect cables to the rj45 and usb a ports. It does have to be in the exact position to work and I switched the cables around a bit to avoid too sharp a bend on the ssd cable.
Like you, I got my RasPad working with NVME after many attempts I found that many NVME Boards had issues, but found that if I used a Samsung 2230 1tb on a Geekworm X1000 PCIe M.2 Key-M NVMe SSD PIP PCIe Peripheral Board for Raspberry Pi 5 that works great and gives me a GPIO extender (which allows me to connect the rotation sensor also) and after modifying the case (fan standoffs removals) plus I additionally opened up the other grill indentation with a tiny drill the same as it is over the fan slot, and now runs cooler as well. Got both the MVME and Geekworn board on Amazon. Also, my SD slots is open and works great. Hope this helps.
I have the x1001 board working inside my Raspad with the sdcard extender in place as usual. I needed to trim the plastic fan mounts as you did and mounted the Pi5 without feet on the bottom. The cover just fits and I was able to put in all 5 screws. I am getting a bit more than 2 hrs. battery life also.
This is nice, I was considering getting a Raspad myself, I have seen them around and think they are cool, I definitely need to research them further, nice video though!
This helps a lot. Thanks for another great video Lee.
I did this a while back and it's not worth it. 1. you can't get any of the script like auto rotate working with pi five and new OS 2. even without the Pi5 the battery drains in about 45 minutes.
I can report that the Raspad3 Tilt sensor does not fit if you have the raspberrypi 5 official cooler. It might be possible to make it work if you solder on some connectors and attach it with wires.
Any manufacturer / open source 3D Printing project out there to build a *flat tablet* so that the M.2 fits *on the side* of the Raspberry Pi 5 ? (not on top or below because of heat). Ideally the tablet should have internally temperature sensors and a laptop-like flat fan to expel the heat on its side, at least for the M.2 drive.
In Michael Rosen's manner: NOICE! ✨
I used the Pimoroni NVME adapter which actually had a ribbon cable that allowed me to connect the SD card slot without any issues, and of course I also had to shave off the fan mounts in order to accommodate the Pi5 cooling fan, I also opened matching the "slots" on the back of the case above the RasPad board with a Dremel tool and mounted the fan that came with the RasPad and directly plugged into that board, so I have extra airflow cooling! With the boot order as configured for NVME, I would still like to know how to change OS without dis-assembling the RasPad....?
Check the bibu6666 comment
Good video Lee did you manage to get the sound working on Pimiga 4 with the Pi5 yet?
I haven’t tried since. Worth checking the Discord
The ethernet cable is too short for this modification and put too much stress on the connectors. I modified mine as shown; but, the ethernet connection is intermittent and keeps failing. Very frustrating!
I am thinking to get out my Dremel tool and “modify” my Crow Pi L laptop case for Raspberry Pi 4 so it will take a Raspberry Pi 5
Too bad that the two seemingly custom short micro hdmi cable are not available in the marketplace. Raspad store does not sell it as sparepart. If you know where to buy.
Unfortunately I don’t
Unrelated, could you do a video with geforce now on raspberry pi?
Is the battery module removable so you can get higher capacity ones? Thanks for the video.
I dislodged it at on point by accident. It seems to be fixed with double sided tape
Leeps, you need to buy a Dremel tool...LOL
I have one in the garage. 👍🏻
I also consider to use a Raspad 3 with Raspberry Pi 5 and a NVME drive. But what about the Power Consumption. The official Power Supply is a 5 V 5A. So can the Raspad power the Raspberry Pi 5 plus a NVME driver without to get an undervoltage warning?
Yes
Raspberry Pi 5 tablet with NVMe drive. Raspad 3 #Raspberrypi5 battery life test
czcams.com/users/shortsnZmHQgPF4JI?feature=share
@@leepspvideo So do you also recomended the Raspad 3 with a moderate overclocked Raspberry Pi 5 with a NVME SSD?
The strength is definitely flexibility. Install loads of different operating systems with a full desktop web browser, super easy retro gaming. The major downsides are size and poor battery life. (Worse if you Overclock). I guess it’s whether it offers you something you need that an iPad doesn’t @@awakeburndownwtandletthego4629
Can you make video and check, or possible install libreelec in nvme disk.
I installed it to an sd card, should be the same with nvme. I just used Raspberry Pi imager.
libreelec.tv/downloads/raspberry/
I showed it a bit in this video near the start of this video
Pi News 82. Retropie, Batocera and VNC on Raspberry Pi 5
czcams.com/video/f_xRai1n9hI/video.html
CZcams often demonetises kodi videos
Hello Lee, could you test FydeOS on a RPI 4?
It works great. This is all on Pi 4 / 400
Chromium The best beginner OS on Raspberry Pi? FydeOS update, simple Overclock & Linux fixed.
czcams.com/video/jFI2E0l9gzw/video.html
GTA San Andreas Raspberry Pi 4. The best GTA performance on Raspberry Pi.
czcams.com/video/g-UrhB4nUG4/video.html
Chrome OS Android Games test. Raspberry Pi 400 / 4 FydeOS.
czcams.com/video/oFPJOCbYHkA/video.html
How to install Chrome OS with Android & Google Play store. Raspberry Pi 400 / 4 FydeOS.
czcams.com/video/U4i33CSPGnM/video.html
Thanks a Lot, I already installed FydeOs on my raspad /RPI4 amazing
Hi, I have a problem. I‘ve inserted the RPI5 in the raspad. With SD it will boot. The NVME is on the way, but I wanted a first test with USB.
It won‘t work. The Raspi says: Not enough energy for USB. Did you have the same problem?
@@christianpreiss8246 no, your usb could be using more power than nvme. I would avoid Overclocking inside the raspad as that will use more power.and run hotter.
PCI’s boards that take power from gpio pins can be more forgiving than usb storage.
I discussed it in a video, can’t remember which one, maybe
What can we do with this extra power? Up to 40 Watts Power Delivery for Pi 5.
czcams.com/video/f8Ou6VkuF4w/video.html
Or
My new NVMe setup Raspberry Pi 5. Plus longer PCIe cable tests
czcams.com/video/DX6tg-FY_nI/video.html
pi zero battery life test or radxa3 or both .make ya a cuppa tea....lol
Is it compatible with a stylus pen for writing?
Yes, the same type you would use on most iPhones and Android phones
I think my 2 in 1 laptop is thinner than this...😅