HOW TO BUILD HVLP LIFT PUMP ( 89-93 FIRST GEN CUMMINS )
Vložit
- čas přidán 9. 09. 2024
- HOW TO BUILD PISTON PUMP ( HVLP) FOR THE VE CUMMINS ( 89-93 FIRST GEN CUMMINS )
Here is the list of parts to build yourself a pump, when i have website is up the links will below
Need a lift pump spring ?
Rob shared 89-93 CUMMINS LIFT PUMP SPRINGS with you cutteruprob.co...
Need a lift pump ?
for ppump high pressure video ----- • Upgrade Your 12V Cummi...
Interesting upgrade. However the only diaphragm pump pump I've had fail either in the 89 or the 93 both of which were brought new and I still own, was because it set for 2 weeks in northern Canada while I was Snowmobiling at constant -40 (maybe less) and where the rod was swaged to the diaphragm washers shrunk in the cold and pulled through the washers. Also note that on another trip, upon returning from the cross country snowmobile trip, my Dodge was the only truck that would start on it's own without being plugged in or pushed in the the shed at the hotel to be warmed up first
Right on Rob.. Those stupid old diaphragm pumps were always a week spot on carbureted cars. Holley replacement in tank electric fuel pumps add great reliability
You helped me out over a year ago with the 973 spring in the pump, plus I might have drilled out the plunger holes slightly. Appreciate your content as always man. Keep it up
Thanks Rob! I need to change my diaphragm pump out and you just made my search easy!!
That screen may be there just to contain the fragments of the pump itself if it fails.
Thanks again Rob. Had to rewatch this one.
More Great Rob content ! Thanks for pointing out different important facts. 👍
Pumping out great content Rob. Very informative
For the black diesel delete the stock mechanical pump & upgrade to an electric fuel pump. Reason being is that when ur running thicker fuels you will find more spots for air intrusion where airs getting into ur system.
Plus since the fuel is thicker the stock fuel pump isn’t enough to pull the fuel from the tank. It also makes bleeding air a breeze when u gotta change filters.
These mechanical pumps if they fail can leak fuel into the crankcase. If one happened to be running the truck on stuff that should never see the crankcase like vegetable oil or atf ur doin ur engine & IP a favor to upgrade.
I'm blown away at how much a certain shop in Utah charges for a piston lift pump with a 973-1 spring in it.
I had a 14mm VE,that I tried feeding with a stock piston pump from a 7100 engine,that pushed fuel past the drive shaft seal on the front and filled the crankcase,...I then installed an adjustable air dog...the pump eventually failed on me unfortunately cause of my own wrongdoing probably...but anyway,...great content as always feller...catch ya on the next one 👍👍👊
I looked on your website for a low pressure pump (kit with gaskets, spacer etc) and couldn't find it, are you selling these kits? If not, where is a good place in canada to find them? thanks
Can you replace the seal inside the plunger style pump
If you could find one you could.
Right I haven’t really seen a rebuild kit for like the OEM Carter pumps (ever) and I’ve never took that seal out to even know what it looks like 🫤
@@fittedproductions. Pumps are cheap enough I have just replaced them if needed.
Thanks for the information
Isn't there a problem with the new after market pumps were they dump fuel into the crank case .?? Then there is ones with the weep drain hole on the out side . Or am I just loosing my mind
There could be I haven’t had one do that in years. But it can happen
I have a 12 v 5.9 from a 1995 school bus , 121,000 miles , tag says 230 hp at 2300 rpm , if I replace the lift pump while its out should I replace the pump with the big spring one , or just leave it alone, all we’re doing is a reseal and kdp its going into a 1995 f350 service truck ,
I have a Cummins B3.9l engine in a 2004 Lull telehandler. I just started having throttle response issues. As I just bought it used I started I presumed lift pump and filter issues. Pulled the Wix 33358 fuel filter and saw it was rusted internally so replaced it. Couldn't get the lift pump to prime so thinking about replacing. A direct replacement is very expensive. But I saw mid-90s Dodge Cummins diesel pump that looked exactly the same being just $60. Will they work with my B engine?
Pretty interesting. I appreciate your videos greatly. 30yrs ago, I wrenched for a living at a speed shop. I fell out of tune with it and moved onto other trades. My passion for speed never faded, it just got moved to the rears. As years have passed, I watched the performance diesel industry expand. With that comes my 6.7l hybrid desire.
Just a quick question, how much HP will a big bore piston pump support. I may want to build a 5.9 12v someday......
I have made over 550 on one no issues. Heard of guys making 600-650 on them
Thanks very good
Is it possible for my 12 out Cummins to be getting fuel in my oil due to a hole in the diaphragm on my lift pump
Yep. Or the seal in the first of the ve is leaking
Now that your website is up are you gonna sell the springs? I don't see them on there
The new version isn’t up yet. Dead line is end of this month
@@CUTTERUPROB can I just paypal or venmo you for one of each spring, still not sure which one I need. OD of my plunger is 28mm
Hey Rob I have a V pump on my 91.5 and but I also have a Hamilton cams hat see I don’t have my fuel filter in stock location anymore I have a second GEN fuel filter set up on earth mounted just like a second GEN truck would be I wonder if a guy can use a flex line so I’ll be easier to get that pump hooked up to to my truck anyway this is six in a row jim From Kennerdell Pennsylvania
You could for sure.
Great video what’s the part number for the different springs high pressure n low pressure.also what are those cons shaped springs I see up close the pumps in the video ?
That’s the stock springs in the pump
@@CUTTERUPROB what is the part number for the 10 to15 lb. Spring from Granger?
How can I identify if I have a large or small bore pump so I know which springs to buy? Is there a measurement for the bore I can take? Or is everything that's not OEM Cummins a small bore? Thank you.
you will have to pull it apart and measure the piston
@@CUTTERUPROB I've pulled the pump and measured the OD on the piston, it measures 30mm
Hi Rob, you have a part number for the small bore pump? I'm in the UK.
Thanks in advance.
cummins p/n 3936316
@@CUTTERUPROB you sir are a gentleman. Your content is very much appreciated. Thank you for sharing your knowledge.
@@CUTTERUPROB looking at the specs that pump puts out around 20psi. Is that safe for the 5.9 with a ve pump?
@@stephenellis6651no