The orientation of the glued in plug is important because of the way the cord end indexes when you plug it in. I cut mine using a table saw for the majority of the 4 sides, followed up with a dremel for the corners. Took about 10 minutes total and left an very consistent/flat/straight edge.
Thanks for this video - very helpful. We are using ours at home now, but anticipate fiber coming to our area. At that time, I'll be cutting the case & putting it on my van with a kit from Brandon.
You’re welcome, I hope it was helpful. The job is pretty easy and I’ve had great luck so far with it withstanding the elements. I did notice a few weeks ago that there are some stress cracks in the cover on the corners and I will be contacting Brandon to let him know. I’ll likely order a new cover and o-ring soon to replace mine so I don’t get any water intrusion. I do keep mine mounted to the roof of my van permanently tho and it sees a lot of sun, water and snow.
Awesome walkthrough of the process! Yeah the splitter won't work as it splits the wire pairs for data but some of those pairs are used for PoE in this case. Good call on the A-B switch box.
Yo! Happy to hear that! I don’t have any updates because I haven’t had any issues thru rain or snow storms or anything actually. Systems are still a go and I’m still happy but I will likely be ordering and replacing the o-ring gasket once per year to be on the safe side.
Nice!! Imma do this very soon! It's going on a 96 Pathfinder and it looks like Ill be able to slide the factory roof rack rails over the edges of the magnets on each side to make it even more secure.
Interesting concept and flat mounting kit for small spaces. Thanks for showing us but perforrmace will become less being flat. BUT if rooftop space or power comsumption is not a problem, then for maximum performance considure purchasing the new 3rd gen commercial $1200 rooftop flat mount dish, for RV, Boat, or home use, it is 3x larger in size, has a larger 140 degree angle to connect to , more satellites and longer too, thus less dropouts during handover/mesh use, there is no motor, but uses a tad more power. In Rain storms the larger dish works the best, then older round dishes 1st gen, and last square 2nd gen. For the slight difference in price over dish and kit, this maybe the better option.
Thanks for the info! I am aware of the newer dishes that are available but I've already purchased the one I have and have modified it pretty extensively. Just did a 12v conversion on it as well. I get pretty decent performance out of it depending on my location and time of day, etc. Yesterday I was at a park and I was getting 120mb down and about 8mb up. Sometimes I only get 30mb down and 4mb up but I am happy with both of those numbers as I mostly use my connection to push code.
You didn't need to cut the back of Dishy. You could just separate the front from the back just like you would a smartphone. You just gently heat around the edges and then with a thin tool start to pry it apart. Like you would a phone glass screen.
Too late, haha! Good to know though and hopefully that will help someone out. I personally have not yet seen any demonstrations on how to do it that way but if it works, it works!
I've seen that video, but that method would probably make it too thin for the starmount. You are relying on the leftover plastic edge to put it in place.
@@vanishthevanHere is someone showing a non destructive opening method: czcams.com/video/iqzim4wR7eE/video.htmlsi=nAOdI-AjRbOWBLNN (Still, probably not usable with these flat mount kits)
@@RedSunFX ya know, I’m not here to comment or suggest any methods. What I have done works for me and has continued to work for me thru all seasons thick and thin. I’m happy, so far.
Hey, it's been working just fine for me! I've had it mounted on my roof with zero issues. No water penetration whatsoever. I would recommend it based my experience.
Nice DIY video. Correct me if I am wrong, but that motor was used to orient the original dish? Now you are not using the motor and are simply pointing the dish up? Do you have a record of average speeds prior to cutting the dish?
Hey Steve, thanks man! All I know is from what I’ve researched online and that the dish doesn’t need to point in any direction to achieve the same results. The only reason they had motors to begin with was to point north to obtain the best satellite coverage. Since then they’ve released a lot more satellites and pointing straight up works just fine. I’m fact, Starlink just release their own motor-less flat mounted dish. Some days / time of day I am able to get 200+ download / 30 up, some days 30 down, 5 up.
Nice, thanks for sharing, super useful! I'm about to do the same with mine and am wondering... Adding the network commuter and extra connectors must have increased the overall resistance.... Any stability issues?
Glad it helped! I haven’t noticed any issues whatsoever. Since then I’ve gone to 12v conversion and am using a different router and it’s quite amazing.
@@vanishthevan Thanks, great to hear! I'm considering the 12V conversion too but I reckon I'll take things step by step hehe. Once again, thanks for the valuable info!
@@travsformation1 I just did the 12v conversion myself last weekend but I did not document it on video. I followed the guide linked below in my comment. The only thing I did differently was purchased my own choice of a router and purchased an additional 12v dc to dc converter to be sure the voltage being sent to my router is not above 12v, because my battery bank can sometimes output up to 14.5v --- my process was fairly easy (besides RJ45 connections LOL) and I recommend it. www.outsidenomad.com/how-to-power-starlink-satellite-internet-on-12-volt-dc/
Is your account a "roaming" type? I'm under the impression that if you have a static (fixed) installation account you could not do this service-wise. Your input would be appreciated..
I have the RV account which costs $150 per month and can be moved around. My setup works flawlessly and I am able to get service anywhere I go, as long as I’m not parked under a bridge or under trees, etc.
TBH, I don’t really use it while driving as a solo traveler but yes, it does work while driving at any speed. I have not received any notices from them about it.
@@vanishthevan Hello, I am currently in Kenya with my boat and I just ordered the RV kit from starlink, and will make the modifications according to your video. Thanks for the very complete tuto, and have a great day.
I wish I could be on a catamaran like you! A dream of mine is to sail. Glad the video is helpful. Let me know if you have any questions! My email is in my bio.
Hey Brandon, Thank you for the video. I saw a youtube short (czcams.com/users/shortsyHf-V7s0I1o) you made about converting your dishy plug to an RJ 45, to be more reliable. What wire configuration did you use? T-568B?
Steve Austin??? No way!!! Honestly, I don’t really remember but i think it was from this link where I got the diagram: www.outsidenomad.com/how-to-power-starlink-satellite-internet-on-12-volt-dc/ Name is Josh, Brandon is the guy who sells the flat mounts.
This is really the bad way of flatening the Gen 2 dish, you should just use a knife to gently cut the glue at the edge... then buy a flat bezel 3D printed for Gen 2 and your dish will be rebuildable if needed (with some minor damages at the motor casing and the casing will be 2cm and super clean.
Thanks for your input. I wouldn’t say it’s a bad way. It’s worked perfectly for me and many others. Some might say taking a bus from NYC to LA is a bad way and flying is faster and safer.
The orientation of the glued in plug is important because of the way the cord end indexes when you plug it in. I cut mine using a table saw for the majority of the 4 sides, followed up with a dremel for the corners. Took about 10 minutes total and left an very consistent/flat/straight edge.
If you found this video helpful please hit the like button and leave a comment. That would be very much appreciated.
The orientation of the glued in plug is important because of the way the cord end indexes when you plug it in.
I cut mine using a table saw for the majority of the 4 sides, followed up with a dremel for the corners. Took about 10 minutes total and left an very consistent/flat/straight edge.
Thanks for this video - very helpful. We are using ours at home now, but anticipate fiber coming to our area. At that time, I'll be cutting the case & putting it on my van with a kit from Brandon.
You’re welcome, I hope it was helpful. The job is pretty easy and I’ve had great luck so far with it withstanding the elements. I did notice a few weeks ago that there are some stress cracks in the cover on the corners and I will be contacting Brandon to let him know. I’ll likely order a new cover and o-ring soon to replace mine so I don’t get any water intrusion. I do keep mine mounted to the roof of my van permanently tho and it sees a lot of sun, water and snow.
Awesome walkthrough of the process! Yeah the splitter won't work as it splits the wire pairs for data but some of those pairs are used for PoE in this case. Good call on the A-B switch box.
Thanks! I’m no expert but quickly discovered the splitter won’t work. Luckily it was only $6
Thank you for the Starmount install video - getting the V2 and your detailed tips will be a help.
Any update on the stress cracks you noted?
Yo! Happy to hear that! I don’t have any updates because I haven’t had any issues thru rain or snow storms or anything actually. Systems are still a go and I’m still happy but I will likely be ordering and replacing the o-ring gasket once per year to be on the safe side.
This is so sick dude. Awesome video
Yo! Thanks! It’s pretty dope and works well. It’s been thru lots of rain and snow and zero leaks or condensation build up.
Nice!! Imma do this very soon! It's going on a 96 Pathfinder and it looks like Ill be able to slide the factory roof rack rails over the edges of the magnets on each side to make it even more secure.
Cool! Good luck man, it’s not too difficult! It works great on the go for me and I am very happy with mine! Let me know if you have any questions.
Interesting concept and flat mounting kit for small spaces. Thanks for showing us but perforrmace will become less being flat. BUT if rooftop space or power comsumption is not a problem, then for maximum performance considure purchasing the new 3rd gen commercial $1200 rooftop flat mount dish, for RV, Boat, or home use, it is 3x larger in size, has a larger 140 degree angle to connect to , more satellites and longer too, thus less dropouts during handover/mesh use, there is no motor, but uses a tad more power. In Rain storms the larger dish works the best, then older round dishes 1st gen, and last square 2nd gen. For the slight difference in price over dish and kit, this maybe the better option.
Thanks for the info! I am aware of the newer dishes that are available but I've already purchased the one I have and have modified it pretty extensively. Just did a 12v conversion on it as well. I get pretty decent performance out of it depending on my location and time of day, etc. Yesterday I was at a park and I was getting 120mb down and about 8mb up. Sometimes I only get 30mb down and 4mb up but I am happy with both of those numbers as I mostly use my connection to push code.
@@vanishthevan Did you do a video of your 12v conversion?
Hopefully the magnets are super strong so I can put it on my hood of my rig
I’ve had zero issues with them budging, not even the slightest.
I used 2 sides gorilla tape for mine with no issues
You didn't need to cut the back of Dishy. You could just separate the front from the back just like you would a smartphone.
You just gently heat around the edges and then with a thin tool start to pry it apart. Like you would a phone glass screen.
Too late, haha! Good to know though and hopefully that will help someone out.
I personally have not yet seen any demonstrations on how to do it that way but if it works, it works!
@@vanishthevan czcams.com/video/iqzim4wR7eE/video.html
I've seen that video, but that method would probably make it too thin for the starmount. You are relying on the leftover plastic edge to put it in place.
@@vanishthevanHere is someone showing a non destructive opening method:
czcams.com/video/iqzim4wR7eE/video.htmlsi=nAOdI-AjRbOWBLNN
(Still, probably not usable with these flat mount kits)
@@RedSunFX ya know, I’m not here to comment or suggest any methods. What I have done works for me and has continued to work for me thru all seasons thick and thin. I’m happy, so far.
mine came with a different pen. Drops to about 8/10 of an inch. have not yet cut.
Good luck! Mine has been working flawlessly. Posting this comment from Austin Nevada, in the middle of nowhere.
How’s it workin a year later? Im debating doing this vs the wedge mount but a little nervous on longevity
Hey, it's been working just fine for me! I've had it mounted on my roof with zero issues. No water penetration whatsoever. I would recommend it based my experience.
Nice DIY video. Correct me if I am wrong, but that motor was used to orient the original dish? Now you are not using the motor and are simply pointing the dish up? Do you have a record of average speeds prior to cutting the dish?
Hey Steve, thanks man! All I know is from what I’ve researched online and that the dish doesn’t need to point in any direction to achieve the same results. The only reason they had motors to begin with was to point north to obtain the best satellite coverage. Since then they’ve released a lot more satellites and pointing straight up works just fine. I’m fact, Starlink just release their own motor-less flat mounted dish. Some days / time of day I am able to get 200+ download / 30 up, some days 30 down, 5 up.
Nice, thanks for sharing, super useful! I'm about to do the same with mine and am wondering... Adding the network commuter and extra connectors must have increased the overall resistance.... Any stability issues?
Glad it helped! I haven’t noticed any issues whatsoever. Since then I’ve gone to 12v conversion and am using a different router and it’s quite amazing.
@@vanishthevan Thanks, great to hear! I'm considering the 12V conversion too but I reckon I'll take things step by step hehe. Once again, thanks for the valuable info!
@@travsformation1 I just did the 12v conversion myself last weekend but I did not document it on video. I followed the guide linked below in my comment. The only thing I did differently was purchased my own choice of a router and purchased an additional 12v dc to dc converter to be sure the voltage being sent to my router is not above 12v, because my battery bank can sometimes output up to 14.5v --- my process was fairly easy (besides RJ45 connections LOL) and I recommend it.
www.outsidenomad.com/how-to-power-starlink-satellite-internet-on-12-volt-dc/
Is your account a "roaming" type? I'm under the impression that if you have a static (fixed) installation account you could not do this service-wise.
Your input would be appreciated..
I have the RV account which costs $150 per month and can be moved around. My setup works flawlessly and I am able to get service anywhere I go, as long as I’m not parked under a bridge or under trees, etc.
@@vanishthevan Very cool! 😎👍
Have you been using it while driving? Have you had a warning from Starlink to stop this?
TBH, I don’t really use it while driving as a solo traveler but yes, it does work while driving at any speed. I have not received any notices from them about it.
Excellente vidéo, merci beaucoup
Thanks Catamaran!!!!
@@vanishthevan Hello,
I am currently in Kenya with my boat and I just ordered the RV kit from starlink, and will make the modifications according to your video.
Thanks for the very complete tuto, and have a great day.
I wish I could be on a catamaran like you! A dream of mine is to sail. Glad the video is helpful. Let me know if you have any questions! My email is in my bio.
What did this mount cost you?
I believe I paid about 350 or so. Here, check out the website for more information and other mounts available. star-mountsystems.com/
Hey Brandon,
Thank you for the video. I saw a youtube short (czcams.com/users/shortsyHf-V7s0I1o) you made about converting your dishy plug to an RJ 45, to be more reliable. What wire configuration did you use? T-568B?
Steve Austin??? No way!!!
Honestly, I don’t really remember but i think it was from this link where I got the diagram:
www.outsidenomad.com/how-to-power-starlink-satellite-internet-on-12-volt-dc/
Name is Josh, Brandon is the guy who sells the flat mounts.
@@vanishthevan 😆 Yep, that's me. thank you for the reply and the link. Its hard to find information on this.
@@scas316happy to help!
Dude, can you sell me the part that you cut it off ？
Lolz. What part?
This is really the bad way of flatening the Gen 2 dish, you should just use a knife to gently cut the glue at the edge... then buy a flat bezel 3D printed for Gen 2 and your dish will be rebuildable if needed (with some minor damages at the motor casing and the casing will be 2cm and super clean.
Thanks for your input. I wouldn’t say it’s a bad way. It’s worked perfectly for me and many others. Some might say taking a bus from NYC to LA is a bad way and flying is faster and safer.
The orientation of the glued in plug is important because of the way the cord end indexes when you plug it in.
I cut mine using a table saw for the majority of the 4 sides, followed up with a dremel for the corners. Took about 10 minutes total and left an very consistent/flat/straight edge.
Thanks for the info. Hopefully it helps someone who finds this video!