I did a Daihatsu Charade clutch disc change with out an alignment tool. After I had pried the engine & transmission apart far enough to where I could get to the pressure plate bolts, upon reassembly I just eyeballed the disc in relation to the pressure plate to where it all looked centered. When I stabbed it with the transmission, it went right in. I never did change the throw out bearing.
Just rub your finger around and feel for an even lip all around, if it doesn't feel even all around, it's not aligned. Simple. Been doing mobile clutch replacements over 8 years now and my trusty finger has never failed me. Though my ex would beg to differ.
Lol haha, all jokes aside though that is how I did mine last time how would I do the self adjusting clutch on a BMW without an alignment tool? I have to do one on my car here pretty soon the ones I have seen the pressure plate does not even touch the clutch disc until you released that locking thing and once you do that you cannot take it back off without it taking up the slack or FreePlay then it's hard to reset it not sure hot thst works I do not have alignment tool do not know where to get one try to figure out some kind of solution
Can you explain this process to me please? Do you have the pressure plate in position here with some pressure already on the friction plate? And then feel around with your finger and adjust the friction plate as necessary?
Y yo porque soi tan desgraciado que lo yebo aún mecánico que solo se dedica a poner embragues y ya van 3 montados y aún así no va bien,y eso que entró con vimasa que parecía una fiesta
Once you removed the clutch assembly removed the bolts on the flywheel but leave one bolt loose to hold the flywheel when you shake with pry bar in the opposite sides or hammer the flywheel out.
@@montgomeryha4921 there is a shaft on the tranmssion if the clutch is not aligned the shaft won't go through and mate with the pilot bearing.and will cause a hassle it reassemble
بهتر نبود برشی کوچک از لوله پولیکا آب و در صورت بزرگی لوله پولیکا می توان با سنگ تراش ب مقدار لازم لایه ای نازک برداریم که دیگر چسب مصرف نشود و برای همیشه استفاده کنی.خ
Thanks mate, saved us the headache.
wow!!!! first time I saw this way.........thumbs
up!!!!!
Thanks. you solved my problem, it works!!
Helpful content
Will always follow up this Chanel. Donto get tired give us more mechanical knowledge.
Thanks
I did a Daihatsu Charade clutch disc change with out an alignment tool. After I had pried the engine & transmission apart far enough to where I could get to the pressure plate bolts, upon reassembly I just eyeballed the disc in relation to the pressure plate to where it all looked centered. When I stabbed it with the transmission, it went right in. I never did change the throw out bearing.
me 2 😎 Always whithout any problems ( but you have to have carpenter eyes 😉👌😉
Nice video, I learned how to do this. I will do it on my car.
⁶66 690-9643 r 5w³25⅚62y622526²25⁴è
Good idea sir,thank you for sharing.
Just rub your finger around and feel for an even lip all around, if it doesn't feel even all around, it's not aligned. Simple. Been doing mobile clutch replacements over 8 years now and my trusty finger has never failed me. Though my ex would beg to differ.
Lol haha, all jokes aside though that is how I did mine last time how would I do the self adjusting clutch on a BMW without an alignment tool? I have to do one on my car here pretty soon the ones I have seen the pressure plate does not even touch the clutch disc until you released that locking thing and once you do that you cannot take it back off without it taking up the slack or FreePlay then it's hard to reset it not sure hot thst works I do not have alignment tool do not know where to get one try to figure out some kind of solution
Can you explain this process to me please? Do you have the pressure plate in position here with some pressure already on the friction plate? And then feel around with your finger and adjust the friction plate as necessary?
The best one....I do that too...
Nice. Thank you for the video.
Excelente video tutorial.
Fantastic
What an idea 😂😂😂😂🎉🎉🎉 great job
Thanks for sharing
Nice video
hi, do you have to lock flying wheel when doing clucth replacement or no need?
Very nice video sar
Perfect!
Great Video, thankyou so much..
You're welcome bro, please watch my other videos on my JCJ tech CZcams channel
Good idea.
Nice
nice technique
Good video bro
very very gooooooood
and other 10% I use eye look into the center hole.
90% I just use one finger to feel from the side there pressure plate holes.
Good iadia bro
One love
Okay Sir
👍👍👍👍👌
bonne vidéo, j'apprécie la musique en arrière plan.elle est de qui ?
❤❤❤❤
iwant to know how easy way to fix the problem
👏👏👍👍
Para sa mga baguhan lang yah
Y yo porque soi tan desgraciado que lo yebo aún mecánico que solo se dedica a poner embragues y ya van 3 montados y aún así no va bien,y eso que entró con vimasa que parecía una fiesta
won't work on the one without flywheel bearing.
❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉🎉
Sir how can we pull out the fly wheel. Plz ans it.
Once you removed the clutch assembly removed the bolts on the flywheel but leave one bolt loose to hold the flywheel when you shake with pry bar in the opposite sides or hammer the flywheel out.
Thnx sir. Make more videos for us .
Use sinchas sin fin
Use old top gear
Hello bro
i do not understand why should it need alignment, alignment to what exactly?
😂 best comment ever!
i am new to car mechanics bare with me
@@montgomeryha4921 there is a shaft on the tranmssion if the clutch is not aligned the shaft won't go through and mate with the pilot bearing.and will cause a hassle it reassemble
Video magnifique mais il falait enlever cette musique de merde
بهتر نبود برشی کوچک از لوله پولیکا آب و در صورت بزرگی لوله پولیکا می توان با سنگ تراش ب مقدار لازم لایه ای نازک برداریم که دیگر چسب مصرف نشود و برای همیشه استفاده کنی.خ
only for loser clutches. try that with a 3 disk clutch!