TAMIYA King Hauler with DIY Sound & Light Controller: First Test Drive. It's Awesome!
Vložit
- čas přidán 28. 08. 2024
- In this video: The awesome Tamiya King Hauler is on its first outdoor test drive, together with the Tamiya flatbed semi trailer! It’s equipped with my Arduino ESP32 sound & light controller, as well as with my Arduino based 2.4GHz remote.
Part 1, unboxing: • Tamiya King Hauler & F...
Part 2, trailer build on Junior’s channel: • Video
Part 3, first controller tests: • G.T.POWER Truck Sound ...
Part 4, sound & light controller demonstration: • Arduino DIY ESP32 Truc...
Light & sound controller features & improvements, compared with old version for ATmega328P:
- better sound quality, sampling rate up to 22’050Hz, instead of 16’000
- Multiple sounds can play simultaneously
- real DAC outputs, no R/C filter circuit required
- easier sound file conversion thanks to bitlunis conversion tool (link above)
- the variable speed engine sound can play at the same time as an additional sound with fixed speed (a horn or a siren for example)
- more sounds in better quality available
- special sounds included like: „Martinshorn“ fire truck horn, US Police siren, Swiss post bus horn, train horn, car horn, MAN TGA truck horn
- Engine sounds for: Land Rover Defender V8, ford Mustang, Chevy Nova, Dodge Challenger, MG B GT V8, LaFerrari, V8 Trophy Truck, Scania V8, Ural V8, Kenworth, Detroit Diesel etc.
- Air brake sounds
- Output for vibrating motor, which simulates engine vibrations
- Vehicle inertia simulation, if crawler type ESC is connected to pin 33
- Many light functions like headlight, tale light, brake light, indicators, blue light, foglight, sidelights
- 4 RC servo signal inputs
- 13 light outputs
- PPM communication
- One wire communication with my „Micro RC“ remote system: github.com/The...
Material links for sound controller:
- ESP32 board: www.banggood.c...
- PAM8403 amplifier: www.banggood.c...
- Small speaker: www.banggood.c...
- Big Speaker: www.banggood.c...
- Resistors: www.banggood.c...
- Breadboard: www.banggood.c...
- Jumper wires: www.banggood.c...
More Links:
- King Hauler semi truck kit 56301: www.tamiya.de/...
- Flatbed semi-trailer kit 56306 : www.tamiya.de/...
- Semi-trailer light set 56502: www.tamiya.de/...
- Servo (you need 2 or 3): www.banggood.c...
Banggood Weekly Coupon Deals: goo.gl/D8B1Mu
Banggood Weekly Discount Deals: goo.gl/uGS7Lf
Now go and build your own!
My DIY Open Source Arduino 2.4GHz and IR „Micro RC“ Remote:
github.com/The...
github.com/The...
github.com/The...
github.com/The...
www.thingivers...
github.com/The...
bitlunis ingenious wav conversion tool: bitluni.net/wp...
Check out my other RC videos: • Remote control
My GitHub: github.com/The...
My Thingiverse: www.thingivers...
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Instagram: / thediyguy999
If you want to support this channel: / thediyguy999
#TheDIYGuy999 #TAMIYA
I love how it increases engine sound before the truck starts moving. It really shows the advantage of letting it control the esc.
Yes, that's exactly why I did it. And it works without any issues. All the signals to the controller are running via serial communication btw.
I can't stop looking the d90's and truck its so awesome
Yes, it's awesome, I can't stop driving it...
wow the build came out awesome,great video
Thank you. Yes, it's awesome.
Good luck guys. Nice trailer vidio 😎😎👍👍👍👊👊
Thank you
Awsome build! I am almost complete with your controller for my Grand Hauler. I also added a wireless link for the trailer lights using a pair of Nano's and a pair of NRFL01's. Thank you for the work you put into this project.
Thanks and you're welcome. Have a look at the newest update BTW.
Awesome, keep going! I was going to try to do so. Now I don't have to. Thanks!! :)
Thank you and you're welcome. I almost can't stop driving this thing...
Великолепный и классный тягач!!!👍👍👍
Thank you
awesome 👍👍👍
Thank you!
Sounds so well!
Thank you. Yes, it's just awesome
Perfect!!
Thank you
Cool really good
Thanks!
so one ESP32 controls LED, sound, DC motor and Servo too ?
Yes, see my other videos and GitHub for details.
Nice
Thank you
@@TheDIYGuy999 hey bro, my esc32 don't have CMD, SD3, SD2, SD1, SD0 pins. Is this necessary for the system ?
@@erhanyldz5342 No, they are not required and reserved for system use anyway. Just use the pins according to the #define statements in the sketch and it will work just fine. good luck.
TheDIYGuy999 oh thanks. I will look the codes.
TheDIYGuy999 but still i couldn't understand the wiring scheme. a very complicated scheme
Really nice . I been looking for something similar to put my tank on but the tank is 1/16 scale and about 15 lbs . Metal version. Any suggestions
Thanks. Why not just using / adapting this project? Alternatives:
www.servonaut.de/shop/en/?cat=c18_Soundmodule-Soundmodule.html
www.beier-electronic.de/modellbau/produkte/produkte.php?sprache=gb
@@TheDIYGuy999 thanks for the tip buddy .
@@paulmaldonado1969 You're welcome
Can't light hazard to adjusment.h
Can we buy you a fully built one?
You can order the controller PCB here (see PDF):
github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/tree/master/Eagle_PCB
@@TheDIYGuy999 thank you yo are cool
hi. 'taskhandle_t' does not name a type' I'm getting an error. why could it be? this project is awesome! :)
Thanks. Have you installed the ESP32 board definition as well as the libraries, wich are mentioned in the sketch? Also have a look at "board settings.png"
@@TheDIYGuy999 I solved the problem. Thank you for your interest 😍
@@osmanalan9456 nasıl çözdün
kardeşim
@@erhanyldz5342 ıde'ye esp kartını yükleyince o hata ortadan kalkıyor hocam. Arduino ide kurulumu yazınca googleye nasıl kurulacağı çıkıyor
Show,,,,,,,,,,,,,
Thanks
1/14 scale or 1/10
1/14
Nice idea. doesn't explain alot. and info on how it is made is poor. just a load of click bait links.
Just not true. The GitHub links with more documentation are provided
@@TheDIYGuy999 show!!!!!!! Excelente trabalho!!!! Gostaria de vídeo cursos de como começar a fazer esse programa para efeitos sonoros e controle remoto com Arduino!! Faz uns vídeos ensinado a programação desses seus controles com sons super reaislistas!!! Seria muito bom aprender a programar assim!!!! Acompanho seu canal no CZcams a muito tempo!!!! Gostaria de aprender a fazer uns programas assim!!!
@@CarlosFilmagem2008 Thank you for the praise. You can find a step by step tutorial on how to make the required sound files on my GitHub. Also have a look at my newer videos. Programming the ESP32 is nothing special. You can find a lot of examples on Google.
@@TheDIYGuy999ok, muito obrigado!!!!! vou acompanhar mais o seus vídeos, que são excelentes!!!!!!!!