I just finished mine on a 2002 Avalanche. I went to the junk yard and got the under seat panel , made my square opening for the fuel pump and cut the donor panel four inch overlap silicone and a few self tapping screws and done. Thank you Sir!
so it does work on a 02' avalanche eh? just wanted to confirm cuz im having the same issue, if im able to do it through the bottom seat thatll save me a lot of money.
You are the man! Watched several videos no one shows you every step like you did. Thanks big time 🙂 I'm gonna be trying my luck soon on 2000 suburban. Great job all the way!
It’s not that hard to change a fuel pump. I changed mine out of my EXT, first time I ever did it, if you have the slightest bit of common sense it’s very easy
at side from not cleaning before taking the pump out, talking too much about other shit, and the music that make harder to listen to the important and valuable information. the video it great! thanks man don't take it bad, but, videos straight to the point are greatly appreciated
if u test the pump like u say, don't you gonna have lots of gas into ur engine bay? because the working pressure is 55! 65?psi i would think that is vetr if in a container u put a bit of gas. plug t pump. plug a house and turn the key for a sec. pump should shut gas n u will hear the pump running noise. this way, if it doesn't work. u just spray some brake cleaner in the submerged area and send it back doesn't what i said, make sense?
Please don't remove that fuel line under the hood and try to start the vehicle you will not only make a mess but you can start a fire under your hood. only a fool would take an unnecessary chance with the safety of gasoline be smart and use a nice safe fuel pressure testing gauge.
Have a helper hold a coffee can or something under the lines. Even at 65# pressure the flow isn't going to be dangerously fast. Pump runs for 1-3 seconds and shuts off if ECM doesn't sense engine rpm. Try 3 cycles. If no gas ÷ bad pump or totally restricted filter. Be sure to always replace fuel filter with new pump.
Once again we see someone trying to fix the truck the wrong way. First of all the way he did is very dangerous. If you're messing with a fuel pump that you can't see through a steel floor the Sparks can cause explosions remember you're working with gas gas is very high a flammable. Second of all if you get a gas leak at the fuel pump the fumes can enter the driver's cabin. Third of all if the vehicle happens to have a gas line leak you can cause death to anyone that's in that vehicle. For but not least if the exhaust system has in the leak it can enter into the vehicle through that hole that you made. If you ever have problem with funding please talk to the garage and see if they can make a payment with you to do it the right way if your family is not value to you do it this way other words please be safe don't listen to these mechanics want to be mechanics. 🤕🤕🤕
I just finished mine on a 2002 Avalanche. I went to the junk yard and got the under seat panel , made my square opening for the fuel pump and cut the donor panel four inch overlap silicone and a few self tapping screws and done. Thank you Sir!
so it does work on a 02' avalanche eh? just wanted to confirm cuz im having the same issue, if im able to do it through the bottom seat thatll save me a lot of money.
Like your attitude I’ll watch you as much as I can good job
He is good at it.
Thanks it took me 2 hours to do this I have 2003 Escalade ext I replaced the pump the filter and relay it works awesome
where the relay is located?
Thanks Mr. Crank it ! You save me a lot of STRESS!
You are the man!
Watched several videos no one shows you every step like you did. Thanks big time 🙂
I'm gonna be trying my luck soon on 2000 suburban.
Great job all the way!
Thanks alot Brother you made my day with this video.
Happy to help!
Thanks for the vid, now I know where to cut the access panel for my 03 avalanche.
Fantastic!
Me too just got my pump for my 03 avalanche Thursday thanks man
Man thank you so much for this I have a 03 avalanche need to do this glad I searched, my truck sounds like that true duals not cats and 2 cherry bombs
Crank it, good video. I have the same problem of having a full tank of gas when mine went. Gonna get after it tomorrow after work thanks for the video
Thanks
Good stuff .. thx!
1 advice for the 1st timer is, go to a junk yard and practice there before working in your personal
It’s not that hard to change a fuel pump. I changed mine out of my EXT, first time
I ever did it, if you have the slightest bit of common sense it’s very easy
at side from not cleaning before taking the pump out, talking too much about other shit, and the music that make harder to listen to the important and valuable information.
the video it great!
thanks man
don't take it bad, but, videos straight to the point are greatly appreciated
That a cad make that thing run good I love caddy quiet
Good video bro. Did you end up changing the fuel filter
I wonder if this would work for a 2007 Escalade?
Did you have to rewire the harness?
What grade gas are you running in it ?
I just bought 05 Escalade ext.
The cheapest way is 85 and use racetrac witch is the best quality for the price but it would best to run 87 shell or racetrac
no need to pop off the return line to test...
What's the measurements
Is that the A ABIGAIL fuel pump?
Your. Funny
Well. This work on 2009 avalanche
if u test the pump like u say, don't you gonna have lots of gas into ur engine bay?
because the working pressure is 55! 65?psi
i would think that is vetr if in a container u put a bit of gas. plug t pump. plug a house and turn the key for a sec.
pump should shut gas n u will hear the pump running noise.
this way, if it doesn't work. u just spray some brake cleaner in the submerged area and send it back
doesn't what i said, make sense?
No.
You told us but I don’t believe it it run lol
U got the pump without the fuel pressure sensor so did actually get the wrong pump LoL
Incorrect sir. A bunch of sellers on Amazon are selling in it and just recommend to utilize the old one.
Crank it next video work on the noise you hurt my ears lol I enjoy I have to learn from you be happy wen I work on my car that my hobby
Please don't remove that fuel line under the hood and try to start the vehicle you will not only make a mess but you can start a fire under your hood. only a fool would take an unnecessary chance with the safety of gasoline be smart and use a nice safe fuel pressure testing gauge.
I understand your concern, however gas will evaporate and the truck motor was cold so it wouldn't start a fire.
Have a helper hold a coffee can or something under the lines. Even at 65# pressure the flow isn't going to be dangerously fast. Pump runs for 1-3 seconds and shuts off if ECM doesn't sense engine rpm. Try 3 cycles. If no gas ÷ bad pump or totally restricted filter. Be sure to always replace fuel filter with new pump.
Depressing the shrader valve will tell you the same thing.
Use new clips avoid future problems
Chill out. Seal it up when you're done, no leaks(fumes, exhaust or otherwise).
Once again we see someone trying to fix the truck the wrong way. First of all the way he did is very dangerous. If you're messing with a fuel pump that you can't see through a steel floor the Sparks can cause explosions remember you're working with gas gas is very high a flammable. Second of all if you get a gas leak at the fuel pump the fumes can enter the driver's cabin. Third of all if the vehicle happens to have a gas line leak you can cause death to anyone that's in that vehicle. For but not least if the exhaust system has in the leak it can enter into the vehicle through that hole that you made. If you ever have problem with funding please talk to the garage and see if they can make a payment with you to do it the right way if your family is not value to you do it this way other words please be safe don't listen to these mechanics want to be mechanics. 🤕🤕🤕