Setting up the LZB Autopilot System - Train Sim World 3
Vložit
- čas přidán 2. 09. 2022
- Today I played through the LZB tutorial from the Schnellfahrstrecke Kassel - Würzburg route. If you have any trouble, leave a comment and I will try to troubleshoot with you.
Buy Train Sim World® 3: store.steampowered.com/app/19... - Hry
It would be a good idea for newer UK trains to have this system on high speed lines to reduce congestion...
I finally figured out why the train stops and doesn't move I totally get why people are confused with this tutorial introduction so let me explain as simple as I can basically they are teaching you about the autopilot system known as LZB which basically controls your train speed and Auto brakes but when you almost reach to the end the guy tells you to press PZB release in 10 seconds because if you don't the train will automatically do a emergency stop once that happens you have to reset the entire train again however if you do it right by pressing PZB release then as soon as he tells you to turn the AFB all the way down to zero do not manually control the brakes once he tells you the LZB is now disabled then you will have complete control of the train brakes please like this comment if it was helpful
can someone explain me why we have to stop near wuerzburg for the upcoming train? is it dangerous to keep driving at a good speed?
at 11.06 when u was at 10 at brake applied why when u turned of lzb didnt it completely did an emergency stop?
Spent the past hour during this tutorial and still don't get it.
Same it’s a confusing train
Literally same
The tutorial doesn’t explain it correctly. There are two parts which are important the LZB itself and the AFB how to engage them should be clear through the tutorial. AFB is a speedometer which holds the speed it is set to. LZB is a system that has to be engaged in Germany while driving over 160 km/h as signals can not be reacted to in time at those speeds. When LZB AND AFB are active they work together as in as long as V/soll is set above the LZB permitted limit. Example LZB max is 200km/h AFB is set to 330km/h in this case the AFB will hold the LZB speed of 200. When AFB is set below LZB speed example AFB 160km/h LZB 200km/h then the rain will hold the 160km/h as the lowest is always applied.
why is afb til 330kmh but the hd only shows that u can go up to 250kmh?
Everytime I try this tutorial the train stops just before the platform in Wurzburg. It just doesn't move, no matter what I do, then after a while it starts to move again.
Same this stupid function is so annoying and useless
Did you found solution?
@@Around-The-Verse Safety systems are complicated as hell. You just gotta understand it, because the train stops if you do something wrong, and there's a lot of scenarios where you can make a mistake.
i swear that happend to me yesterday do u have any solution? i tried applying brakes and releasing then setting afb to 0kmh and setting it again to 70 and so much other things
So once the letter B appears on the HUD, how can we put back to the Ü?
It means that the LZB system is not available and implies manual control. This usually happens when you are approaching the station. Once you leave the LZB system becomes available again and the U comes back on.
@@kostiskat at what distance does the lzb go off? and i the letter B the LZB? and the Ü?
How do you restart the train if it's completely stopped ?
Set throttle to zero then re-apply.
@@raithrover1976 thankssss
@@raithrover1976 i did that but it didnt work
@@SasukeUchiha-ks3rz SAME IT DIDNT DO ANYTHING
Is there some difference between PZB/LZB???
LZB only works if theres an LZB cable in the tracks, which the train will recognize. PZB works with all signals that have a magnet next to the track, the train scans it and knows what state the signal is in to let you pass or emergency-brake you or whatever
wheres the whiteboard with a symbol that looks like an x. this tutorial is so confusing aaaahhhh
no idea got the same problem xD
I get its a year ago now but come on EmMaster 😂😂 respond to something man lol