How To Install Conveyor Belt (Episode 8)
Vložit
- čas přidán 8. 12. 2019
- How to install conveyor belt....let us show you how the Turnin N Burnin Crew installs conveyor belt.
TNB culture apparel teespring.com/stores/tnb-culture
First TNB Blue Collar shirt design teespring.com/topping-out?tsm...
Turnin and Burnin Crew working for
Wrights Custom Alliance Group www.think-wrights.net
Find Turnin N Burnin on
Facebook / turning-n-burning-1020...
Instagram / ibthedifference
Follow our Family Channel Wright Stuff Family Adventures
CZcams / @wrightstufffamilyadve...
Facebook / wrightstuffyoutube
Instagram / wright_stuff_youtube
#turninNburnin #bluecollar - Jak na to + styl
Thank you for watching...didn’t know this video would get this much traffic. Take a look at some of our other videos as we try to bring you in to our blue collar lifestyle.
My boss would send 3 people to do something like that. We be dog ass tired when we done but we get it done
Makes it nice when you have enough help .I worked Asphalt ,Sand and Gravel for 41 years so I know
I'm a conveyor belt technician also..Been installing belt and splicing 8 yrs.Love my job and pay.
Eugene Rodriguez right on! Thanks for watching. We do a little bit of everything and just so happens this was a good day to video us installing a belt.
I’m a belt tech too but I get paid like shit what company do you work for
@@danielmccauley129i splice belt for motion industries. We get paid very well here
@@preston1111 I buy pulley bearings through you guys sometimes up here in Washington didn’t know you guys could break out a belt!
used to do belts in Maine. brings me back!!
Very good work
Good stuff!!
Just finished putting a belt with my crew today lol we in texas aswell stay warm brothers Millwright work!
Weather is crazy right now!! Stay safe!
Thankyou for sharing vidio, very good work 👍
good job!!!
i wish we could film at the package facility i work at. we work with a lot thinner belts but it’s a lot tighter spaces. cool to see another process
Cool. I would’ve liked to see it laced also. Ty
very good video ..thank you
Thank you!!
It’s Lit
Nice 👍 work
Thank you! Hope you check out some of our other videos. Try to show some of our work in a fun way.
dope dig it. G Z UP
Great work
Me in pakistan vulcanizer
@@ansarabbas9471 thank you
Do one of skirtboard rubber installation. Cool video!
Thank you for sharing!
Thank you for watching
@@TurninNBurnin Do you have any video about Canveyor Belt Joints? Would be nice to watch.
@@Jeff-es1yr not at this point but next time we splice a belt we can film it.
@@TurninNBurnin Thanks, Sir! I enjoyed the way you guys show the details and how things are really done in the field. Wish you all success!
Nice video
Thank you!
im subcribe your channel already be coz i like it kind of job..😊😊😊😊
Thank you!
im a belt splicer also from philippines😊😊😊
Nice
Thanks
I do this same work at the mill I work at it’s right outside of Philadelphia unfortunately I don’t get paid that well but I love it maybe one day I’ll be getting better $
Thank you for watching. Nice to meet a fellow bluecollar worker. Cheers from Texas my friend!
I miss you working with you Mike its ray vigil
Hello, Could you show us how to do a conveyor belt change out using the Turner Frame in a perpendicular position?
Damn that's alot a guys. I get stuck doing that by myself but I have a winch. Still alot a work
Gotta do this today 😢
How many feet of conveyor was that? What size cable did you use to pull that?
That was awhile back so I don’t remember. Probably around a 200’ conveyor and I’d assume 3/8” cable.
Bro please take sum safety precaution while working the lives are important
Sand and gravel.
We're lucky to get 4 guys to replace a belt at work, coal mine, usually only 3.
My hats off to yall working in the coal mines. Stay safe!
I 'm mechanical technician conveyor..16 years work in mining.. by theway where is the location mining? And what is this mine? Good job and always succesfull🙏
septa nawanto thank you for watching. This mine site is south Texas area. They wash, dry and separate sand mostly for frac.
Could you use a slightly smaller & temporary bridge piece with attachments installed on each end, and hook it up to old and new belts? Let the old belt pull up the new? Or is there no room at the tail end to remove old belt once it comes off? I use these in flat wire belting and 150-200 weight belts, but curious about monster belts like this. Is there a reason not to have new belt cut to length and lacing pre-installed?
@@timmymims6946 when changing out an old bent we will piggy back it and remove old belt as it pulls the new one. This was the first belt to go on the system. We didn’t have or didn’t want to rent a roll up machine and had the fork lifts to just hang it. Definitely using a roll off or winder works great.
As far as cutting to length it’s just better to splice in place. This conveyor wasn’t designed. It was built in place from point A to point B. So no real drawings. Also if for some reason the bent gets hung up or rips the holes or is a few feet short somehow, then the precut and drilled was a waist.
Also there will be some stretch in these belts over time and will need to be cut and respliced.
Hope I was able to answer your questions.
Interesting, what type of belt is this? And weight? Is there adjustment on each end or just 1? Even with drawings I measure with around pulleys with them sucked in & account for 1-2% stretch to make sure, and on heavy load belts like this maybe 4% …i distribute for PCI Mfg & few other places
👍
Thanks for the thumbs up!
What's the hp of this motor
Please hire me I miss doing this so much IMI PEOPLE really did a lot of good workers wrong I miss the field
Hay Mach Marne you job conveyer belt this praise
My job during many years ( 35 years )
Thank you for watching. We aren’t professional belt guys as we do a lot of different items but we do our best.
Where are you located
South/Central Texas
Ok
Why did you have a camera in the front, while some one is following the belt clamp? Why did you remove it?
Soya Cake we just put the camera on the front for fun and thought it would look cool in the video like you’re getting a prospective you are taking a ride on the belt. Have to take it off because once it rolls over the head pulley it will then be flipped over and hit all the return idlers and get knocked off. Thanks for watching! We try to put out new videos showing what all we do and make them fun to watch.
@@TurninNBurnin where are you located mate
Soya Cake south/central Texas.
How to get it touch with you on an email
Soya Cake go to think-wrights.net/ and there’s a contact us link. Where are you from?
“Never saddle dead horse”
6:37
Saddles dead horse.
Lol, I do see at 7:47 it was fixed.
Good catch! Just testing to see who was watching haha. Thanks for checking out the video.
330 3/16 x 1/16.
I need work Mr.
Maxx
MadMaxx zuni hey hey Maxx!!
I am steel cord belt jointer any vacancy
safikul rahaman we don’t have any vacancy here. Thanks for watching!
Looked like u just sabled that dead hourse
Spurred the horse a little but he never bucked.
we are manufacturer of conveyor belt. For any needs, please feel free to contact me.
Gay!