How Much Did my Cummins Swap Cost? (Ford+Cummins)
Vložit
- čas přidán 4. 04. 2020
- Today we tally up the total dollar amount it cost me to do a Cummins swap on my OBS Ford!
Truck Transformation: • Stock to BUILT Truck T...
DCS: www.dieselconversion.com/
Twitch: / upnorthindoors
Instagram: / upnorthoutdoorz
Email: upnorthoutdoorstv@gmail.com
Outtro Music: / jacked-it-up
Intro Beats by Prod Riddiman - Zábava
I have a 97' F-250, 2 wheel drive, standard cab. I want to do the cummins swap as well. I have all the parts, but lack of time because of work is what has prevented me from getting it done. Swaps like yours help me to get inspired to complete this. The truck would only be used for towing a flatdeck and gooseneck cattle trailer.
I see that you're doing everything to your 96 that I did to my 01 7.3l to make it rust free.
Sorry to see the environment you deal with. Thought it hard to Winter in Eastern Oregon till I saw the Icicles on you rig.
Very informative video, I'm starting my Cummins swap tomorrow in my 1987 F-250 gas, auto. Removing the TTB and searching for a Dana 60. Are they the factory leaf springs in front? What lift do you recommend
For clearance of the Cummins oil pan? Thanks so much for taking the time to explain what you did. I'll keep in touch!😄😄
Those 12 valve Cummins engines are Awesome , very dependable, and very hard to kill those engines. That was a very good move on your behalf for sure , your truck is Awesome brother , love it so much fun you will have with this combo 💯💯😀
Great vid Sir.
I've got a93 xcab 4x4 250 (TTB) AND even have the perfectly running 97 12valve donor truck and STILL CAN'T afford it. 😆
I have a 95 single cab f150 with 05 super duty axels my question is how to wire it all up for the 12 valve
Thanks 👍😊
I have a ‘93 6.5 k3500 with an IFS front end, what do you think it’ll cost me for a 12v ppump swap, I already have a GM nv4500!
Were you able to still use the ford wiring harness for speedometer and tac because of the ford transmission??
Even my 7.3l has that TTB. I might do this if my 7.3l kicks the bucket but I don’t know if it ever will at this rate lmao.
Dana 60 is a much better axle and they also turn shorter than the ttb but that being said, the ttb is plenty strong enough for a 6bt Cummins engine.
Do you have a video on your cab corners?
Bro
I want the headlights and grill!
I want buy 6.9 truck what you sell it for
Where did you get your blocks at
Thanks for the info I was just considering swapping my 78 f250 but it won’t be for some time because I’m trying to save up to rebuild my 1.9 tdi to go in my 91 s10 blazer
That stuff is called “old new stock” just FYI.
I know I’m late but I’m wanting to do a 12v into a 7.3 F250 (1993). Would I still have to swap the front axle ?
Definitely. Get rid of that twin I beam
What song
Hi i love your vids
tthanks!
I want to Cummins swap my f150 that has a 300 Inline 6
What front bumper is that?
Oh it's custom
Nice vids I have a 88 F-150 with that ttb 4x4 I wanna swap out
Do you think a 12V will fit in a 95 f150
It will fit but you'll probably have to reinforce the frame and the the front axle...might want to change that too
Reid Isaacson yeah I’ll just buy an f250 or f350 to do it
@@buildinonabudget4626 Group on Facebook I'm in, people have done it
^^ it's been done but it takes alot of reinforcing and axle swap. Would be better off doing a 4bt in an F150 or like you said get a 250 or 350 with a blown motor
UpNorthOutdoors I buy 6.9 truck person man
I’m a firm believer in the Dana 60 but I am curious as to why you think the TTB in the 92-97 F250’s can’t handle a 12 valve Cummins
Where can I find a grill like that
no where we built it
Nice work cause it's really good
I would like to purchase a grill like that, could you replicate it and sell it to me?
I have a 7.5l 460. Do you think I need a new trans
Is it an auto trans or a ZF5?
@@warrenmcelroy4718 ZF5
@@jacobarterburn1730 I believe the ZF5 behind the 460 uses the same bolt pattern as the ones in the 7.3 diesel trucks. You would need an adapter but that trans would be just fine.
@@jacobarterburn1730 I have a 98 model 4bt for sale if anybody is interested, I’d like to have $1200 for it
@@warrenmcelroy4718 ok
what’s the gas mileage on it i gotta know
Well my '89 Dodge Cummins with 3:00 to 1 gears gets 22 MPG hauling a 4000 lb. camper over mountainous terrain for 800 miles got 22 MPG.
1:20 I think what you meant to say was OEM lol
yes that's the word lol
I clicked watch because thumbnail pic
How I buy red truck I want buy truck
1400$ in zf5 swap parts and 600$ in a parts truck for trans mission is 2k you should have used a dodge manual trans and if the twin I beam can handle the 7.3 why can't it handle the Cummins you also missed some stuff that 90% of trucks will need if it's done right
like I said I'm sure I forgot some little things. I'm not a fan of dodge transmissions. The twin-I beams are absolute garbage. Even if you just had a 7.3 I'd recommend the swap. They just don't hold up. Especially if you want to run anything bigger than stock tires and don't want to spend 95% of your time in the alignment shop. I also spent $600 on the parts truck because like I said I got lucky and the guy didn't realize he had a $1200 axle sitting under it.
@@UpNorthOutdoors its pretty much impossible to fuck up an nv4500 or any stick shift for that matter I still have a twin traction beam been under the truck for 35 years with a 6.9 hanging over it witch is only like 100-1500 pound lighter than a 5.9 swap in progress so we will see If my front axle kills itself
trenton Olson if you are running stock or close to stock size tires the twin I beam will be fine. They don’t hold up when you start getting bigger than 35s.
@@UpNorthOutdoors you was talking about doing the swap so how is it part of the cummins swap if your not going to a large tire not every one who is going a cummins swap is
Dewayne Ellison I was explaining what I did on the swap. Go ahead and put a Cummins in a truck with a ttb. I wouldn’t do it personally. I was giving my recommendation from experience and what I’ve learned from other guys.
I pay for red truck how I buy
I paid $1200 dollars for my Cummins,
@Isaac Ammerman I paid 2000$ for a whole first gen transmission motor transfer case and axles boom done 😂
@@trentonolson5559 where at?
@@octaviorivera1661 North Dakota