Making my own INDOOR PITCHING MOUND?! Unbelievable Results...
Vložit
- čas přidán 9. 10. 2018
- In this amazing baseball video, I show you how easy it is to make your own indoor pitching mound using only simple materials you probably have around your house!
Watch as I attempt to make my own indoor pitching mound for baseball! Follow along as I create a DIY MLB-quality mound and see the unbelievable results in action.
After watching this video, you'll be able to make your own pitching mound in no time, and you'll see unbelievable results! Not to mention, this pitching mound is a great way to improve your batting skills! Thanks for watching!
This video has the instructions and guide on how I built this awesome pitching mound! Let me know if you have any questions! and here are the list of materials needed! 4 - 2"x 12"x10' - Wood Board
1 - 2"x12"x4' - Wood Board
1 - 1"x10"x18" - Wood Board
2 - Sheets of Plywood
9 - 2"x4"13'" - Support Wood Boards
(whatever size you measure)
2 - 3/4" Horse Stall Mats
As many 2" Screws as needed
-
Edited with Gling AI: bit.ly/46bGeYv
Watch as Pitching Ninja, Kyle Boddy, and Cutternation bring you some of the best live at-bats from Dallas, Texas! From viral curveballs to TikTok sports, this video has it all and guarantees to rack up views. Get ready to witness some of the biggest hits and impressive pitches in Texas!
College Burnout, jake savicki, baseball, live at bats, major league baseball, mlb, college baseball, baseball highlights, momentum, trevor bauer, strikeout, hitting, behind the scenes, day in the life,los angeles dodgers, commissioner,baseball vlog, video, milb, documentary, pitcher, sports, bauer bytes, vlog, trevor bauer vlog, trevor bauer mic'd up, eric sim, stephen knez, baseball doesn't exist, pitching ninja, phillies, mlb highlights, andrew young, kyle boddy, yankees, cutternation, best baseball tiktoks, baseball tiktok compilation, sports tiktok, mlb tiktoks, tik tok baseball, funny shorts, sports,
We have huge goals for this channel and we can’t achieve them without your help! Here is our affiliate link list for all of our partners!
Acumobility:
acumobility.com/?ref=n3kiH6T0...
PitchLogic:
pitchlogic.com/special-partne...
Marc Pro for 10% OFF
CNBSB
Clean Fuego for 10% OFF:
CutterNation
AXIO Trainer
axiotraining.com?aff=22
Pocket Radar:
amzn.to/3apIQ9E
Tanner Tee:
amzn.to/3DxmLCA
GoSports Batting Net
amzn.to/3FABZIZ
Stalker Radar:
amzn.to/3mMVm9b
Oates Specialties
amzn.to/3Ds7sv1
Tough Toe in many different Colors:
amzn.to/3iNYQqM
Medicine Balls
amzn.to/3iQoDi6
-
Cutternation Shirts and hats:
cutternation-shop.myshopify.com/
Cutternation Media:
www.cutternation.net/copy-of-...
-
For more information on scheduling and Cutternation apparel go to :
www.Cutternation.net - Sport
![Homemade Portable Pitcher's Mound [DIY Pitching Mound]](http://i.ytimg.com/vi/__g6oWsr2IE/mqdefault.jpg)
![Homemade Portable Pitcher's Mound [DIY Pitching Mound]](/img/tr.png)
This is pretty rad! Wish I had this kind of skill to build something like this.
This video will save me lots of money as i try to fix things my self. Thanks for sharing
great to see you built this mound
Honestly best one i have found after hrs of looking this one has all the measurements awesome vid love it
Check my other one for the wider mound
AMAZING WORK!
So cool!
❤❤❤
Love this video!!
I just want like 10% of the shop. Jeeez that table saw and sled
Thank you, followed your steps 350.00 later. Wood and hardware 250.00, mat 100.00. Kid loves it
Throw some skateboard grip tape at the bottom where he lands! Big upgrade
I need this for my kids
Best one Ive seen yet
Thank you!
Go look at some blueprints and see how they label dimensions between edges. Gotta have a line with an arrow at each end and the dimension in the middle.
Like I asked, what is that 10" dimension? Is it from the front edge of the rubber going forward to the start of the slope or is it the side edge of the rubber going to the side of the mound? It isn't clear at all.
Arrows and dimensions/numbers are more important than the picture of whatever it is you're building.
Great post! How has it been holding up for you?
Freakin awesome!!! Only thing I don’t like is that it’s not at my house…😂😂😂 amazing job
Did you sand over the joint to smooth out where slope starts?
How much do you think this would cost to make
La altura que usaron para hacer el monticulo es la altura oficial de las grandes ligas?
What was the 1 in by 10 in by 18 in board used for
cool - how much space from the rubber to the point where the slope starts? looks like about 10-12 inches?
It was 10 inches
how much does it cost?
how much did all your supplies cost
What's the 10" dimension?
Experience and expertise in building- sell this!!!
How do you know what angle to build it at
Dimensions are in the desription
What did you use to attach the Mats? Also did you use glue?
Screws and washers no glue
What size screws and washers did u use?
2.5 inch
What are the mats you used?
Horse stall mats at Tractor supply company
How many inches do i pit the white pitcher plate from the slope?
10 inches but I would personally put it back further so the pitcher has a little bit more flat ground to stand on before starting his wind up
What was total cost for you? I know it varies based on where you get supplies.
$300ish
Cutternation I made some modifications and was able to cut my costs down to about $140 with turf
How did you measure the slope?
Math
Ha why didn’t o think of that...
What was the total cost to build this
$1 BILLION DOLLARS!
What would you say the estimated cost was?
I think around $350
In my first work I always used Stodoys plans.
can you make me one?
Why did you make it 12" tall? Regulation height for highschool is 10".
Because it’s never 10” it’s normal atleast 12
Sorry but highschool throughout college is 10" where I come from.
Also, for the purpose of what we are doing, the slope is really all that matters. Don't you think?
Jonathan Sintes yes but if you are throwing and you practice location then you are screwed
If you don't like the 12" height then use 2×10s and be done with it.
Yeah I ain’t gon watch this ima get more mad that I can’t make a mound and I’m stressed as shit that I never have anything to practice baseball
This beat is torture to my ears it’s off and awful
Dude, stop liking my comments and respond with, like, words.
ok like, thanks for like, commenting that, like we appreciate your like watch time.
@@Cutternationbsb
Good...good...let the butt hurt flow through you.
Now what about that 10" dimension? From the side of the rubber to the side of the mound or from the front of the rubber forward to the beginning of the slope?
Nice job my guy 🎉
Thanks 💯