Worst RC Car to World's BEST RC Car in 7 minutes - HPI SAVAGE XL 5.9 nitro
Vložit
- čas přidán 4. 06. 2024
- 🎓eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/sq...
Pefect Pass Servo Servo www.amazon.com/Perfect-Waterp...
Ecoboost Servo www.banggood.com/JX-Ecoboost-...
GPS
Get Your Merch Here teespring.com/stores/kevs-merch
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, nitro gang rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #nitrogang
So u take overpriced bad rc, put double the price of upgrated parts on it and call it best ...
🤓🤓🤓🤓🤓🤓🤓
best for me, you can choose what is best for you
@ROFLCOPTERLOL no, savage fanboy, not hpi fanboy big difference
To be fair, that's basically how the hobby works. Almost everything is overpriced crap that needs modding. Lol
@ROFLCOPTERLOL also never denied it so nothing to admit
I watch this channel religiously and im never dissappointed. Thanks kev, you help keep this hobby alive for me.
Another trick for rounded screw heads that works better than rubber bands is to use a little aluminium kitchen foil which seems to fill the gaps enough to often extract the problem screw.
So frustrating that an $800 truck has so many issues....but man once you had it out that engine really ripped! Savages will always have a special place in my heart.
They should sell these things as kits, like they do with the Baja 5b at the moment.
pops had one growing up it was the older one obviously but man that thing ripped and it was double shocks took jumps like no other 😂
That Savage sure put a big smile on your face. That is what this hobby is all about.
Great work! You upgrade the whole r/c car hobby and show the interesting side of it. Thanks for sharing your hard and consistent work with us.
I loved my savage x I had about 10 years ago. It had loads of downfalls but was always a blast to thrash around.
For stripped screws on my RC cars I use a good quality torx bit that is slightly larger and tap it in. Works 100% of the time.
This thing rips! I agree! Nothing like a good running nitro engine. The sound and smell! Knowing everyone is stopping what they are doing to check out your rig! Awesome feeling! Can't wait to see the gasoline one rip it
The savage platform is by far my favorite truck. I have numerous of nitro and electric. At one time I had the biggest and fastest savages in my general area.
Such appalling build quality. Are they made in Birmingham by British Leyland?
It didn't rust to pieces just from sitting on the shelf. It's debatable if it was made by BL. LOL
I had one. A 4.6 bb
😂 yeah not great from HPI!
Yea in today's day in age u can't be having this many issues with an rc this expensive I mean look at some of the bangood nitros he's reviewed and they have very few problems if any otb.Espectially when ur trying to come back come on HPI we all wanna see u stick around don't mess it up
🤣😂🤣
It makes me glad to hear Kevin actually say that nitro rc is more fun than electric when it functions. I fully agree to that! But i have a lot of these old savages,and many other hpi products ,and clearly the quality isn’t that good anymore. Have never experienced that poor quality on screws,or the diff problems.
Same here, I have a few Savage's (too many😂) from the Sav21 to the flux hp and most inbetween, including a twinzilla. I have never had a ring gear go on a diff only the small drive/pinion gear and screws have always been pretty good.The clutch bell and spur have gone but only after a big impact or bearing failure and both my brother and me give our savage's a hammering😂😂🏴
I think they’ve actually been redefined haven’t had problems with my 4.6 diffs despite a full beating regularly.
Random question I didn't realise my air filter fell of my nitro savage when in use I think its sucked up dirt now won't start what do I need to replace or clean to get it going again ?
Hello there. I would totally strip the engine in its hole, after a cleaning of the outside of it of course. After that, i would inspect all internal parts for damage in some way. Especially the cylinder and piston. If there is scratches, you need to buy a new set. But the crank can also be damaged. That is the first part that can be affected to dirt. There is no other way than to dissasemble it before anything else anyway, to be sure of anything. Dont be afraid to open it, its not difficult. Always have the instruction manual to be sure you assemble it the right way. Good luck! @@gtpowergeorgetennent3786
Great tip for removing stripped screws is to use a torx bit, try different sizes until you find one that fits. Trust me it works really well especially on the smaller sized screws
Exactly what I do and it works a treat, I had so many rounded screws i was actually thinking about giving up rc cars until I found a vid on using torx bits
@@sepp1991I thought it was common sense myself
Kev, to get the stripped screws out I just cut a groove in the screw with a dremel and cutting disc. Then unscrew with a slotted screwdriver. Works every time. Loving your work dude
Those eco boost servos are fantastic for the price. They can be noisy at times. What that means is the end points need to be adjusted slightly so its at dead center neutral. It's trying to adjust itself and it has to fight linkage slack to get there.
I can’t believe he’s this deep in the hobby and doesn’t know how to adjust servo end points.
@@ttv8ra23 Dave saying that to me made me just learn. I never had that problem on mine but thats good to know.
You have to love how persistent Kevin is when he is passionate about something.
I had a blast with my Savage back in the day, but I hated wrenching on it, something about the TVP setup that pissed me off, haha. I did get my buddies Savage Flux XL and fixed it for him, but those damn TVP's still drove me crazy. Great truck when it's running correctly!
The HPI Savage has always been my favorite truck since the very beginning! Nice to see them back and producing trucks 👊
heck yeah, it made me very happy to see the resurrection. The new parts are fully compatible with the previous generation, always loved that about hpi and the savage line. your taken care of.
Mate that was a great fix! That 3 speed tranny fix that you did was mind-blowing!🤯 Great job!👍
Just ordered a few parts for my T Maxx love working on these things
Love the channel and all the education I learn from you about RC. Hopefully soon I can purchase me and my boy one and join the RC family have some ripen time together. Great video Kevin.
You make some of the best RC videos Kevin Talbot awesome job bro from the State of California
Awesome vid as always Kev! the savage truly looks very very fun to drive!
I ❤️ my Savage X 4.6 😁 Mines currently in prices being cleaned and once it's back together. It'll be getting a thrashing.
I've also changed the rear diff to the steel version like you showed and I've never had any problems since. I've changed all the bearings in the engine but the piston and sleeve are out of tolerance.
For diff with stripped screw heads:
Use a 3.5- 4mm drill bit to CAREFULLY drill off ONLY the head of the screw.
Go slow and be careful.
Once all 4 heads are off, gently separate the crown gear from the case. There will a little amount of screw exposed.
If case is plastic, grab exposed screw with a good pair of vise grips and extract.
If metal case, you can heat the screw to make it easier to extract.
Or use a dermal and a flat head screwdriver if it’s not impossible to get to
Awesome that you sorted everything out! Now it rips 👍💪
I had an hpi trophy truggy 4.6 and upgraded certain parts and it was an awesome piece of kit.
Idk what it is about this man not even into rc cars but love the videos
Man, Kevin really knows what he's doing! great vid!
Yesssss im glad i stayed up until 5:30 am in usa. Youre a true inspiration kev. You are humble yet very aware of what you are. Not afraid to show off your success in a very entertaining and non-douchey manner. Anybody that says anything negative about you is just jealous. Including Djmedic lol
I just bought my first proper rc car al by you it looks a realy fun hobby
I love the look of the savage octane it's such a nice make of RC
Personally I like heating up the screws with a high wattage soldering iron where the tip fits inside the hex. That seems to work nearly every time for me. Love your videos!
I do the same, works great! 👍🏼
Spot on with Nitro, when it’s running good is so much fun!! Always love watching your videos!
personally i took the 3.3 revo and put rcr .32 bigblock in it and its freaking crazy . my favorite
Kev, when screws strip, get the equivalent star bit. Works REALLY well for me.
I had the first Savage xl and sold it I’m definitely going to get me the new one and thank you for the info also. I just picked up a HPI RS4 super nitro that I need to rebuild . You rock Kevin love your channel 👍🏽🤙🏽🤩❤️
Looks awesome! Great video Kevin. God bless
You are very right about nitro and even petrol being more fun than electric haha! I’ve been playing with my Losi 5ive T 2.0 more than my Kraton 6S and TLR Typhon!
Totally agreed!!
Glad you sorted it out.
Used to love my LST2-upgraded Raminator - LRP 32 powered.
Need to make it LOOK like a more-realistic MT - not 'some generic toy' - that body is really fugly!! (sorry).
Al.
His repairing videos are so helpful, short n interesting
Glad you like them!
holy smokes can you drive that rig! Beautiful to watch, its like your one with that machine and the smile it put on your face, that there is what it is about. Nitro nirvana, once you get a taste its really is special. great episode. Im thinking of getting then new xl, agree wish it was a kit. There is so much going on with these its truely is a amazing to get it to work right. you really do need to set it up. Much more mechanical than an electric thats for sure, clutchs, gears, more gears, breaks... pipe, fuel, engine, roto start. Amazing to think you can get it all in harmony, the savage is sort of the only one you can do that with and bash the crap out of it.
That petrol hpi is cool , another cool nitro if you can find is the thunder tiger with the. 70 engine . Loving the nitro content 👌
I have the savage 4.6 and I freaking love it. I've had it for years and it takes a lot of punishment. Sorted out some problem areas with upgrades and it just rips. I have the reverse module for it I want to try installing. The engine makes great power but can be a bit temperamental with tuning. I think the proper glow plug and fuel quality are important.
Good to see a legend back. I never got one but I drove one and jumped it etc and I remember it being a very easy truck to do tricks with, it handled so well. I hope they improve it, if so, I will definitely get one. You should clean up your gasser and do an episode on it. I agree, nitro was way more fun.
Kev, you really said it about nitro. Truly, there is just a special feeling that comes with the noise, smoke, smell, and attitude these engines have that electric cannot and will never have. So much personality, so much personality... It's the one thing that makes me choose which I'd rather have even if one might be faster and better in some aspects.
That being said if only it wasn't so cold out, I'd have my own nitro RC car broken in and running like wild. Your videos at least satisfy that desire quite a bit!
I have a Kyosho mp9 tki4 and I have to agree, the sound and smell make it fun!
I have never had an issue with my nitro, yes it takes a little bit longer to get going compared to an electric but that is not an ‘issue’ it’s just park or the package, when people run out of batteries they have to go home, we just fill up the tank again 😂
When I get stuck stripped bolts if I can I take a dremel with a cutting wheel and cut a slot to turn them out with a flat head screw driver. Works well if you have space to do it.
awesome vid kev, love the vids. i also went to a hobby shop today and saw all my dream rc cars, like some 1/8 or 1/6/5 scale cars. they look like a blast to drive, hopefully i will get one in a couple years. also they had a raminator!!! that things a beaassttt
I love how it's snappy in low gear but has the speed. We had rc10 gt cars back in the day and they didn't have that low end snap
I got one of those jx eco boosts and they really are amazing like you said it is a bit noisy but it is correcting itself correcting itself by like less than a milimeter
Thats gotta be the best ive seen 1 of kevs gas rcs run forsure. I agree too theres just something about the gas rcs the sound the more realism effect! Although i dont own 1 myself, yet..
Another nice vid. Makes me want to get a Nitro Rc
Ive done some editing myself recently and I have got to say well done on your vids man. Your brother does an amazing job as well! takes a lot of time
I've always loved intros. Awesome truck.
I would like to see you test another Traxxas nitro, the slayer 4x4 pro 3.3 and a rustler 3.3. But I think everyone would like to see you dial on a slayer even though they are similar chassis to revo
I meant to say I have the slayer pro 3.3 and rustler 3.3 ,and that I think you would enjoy a slayer pro 4x4 3.3
Awesome video as always, I’ve been waiting for this one.
Been loving the nitro and gas content lately
Reverse or left hand drill bit’s work nice
I've been bashing on mine for almost 16 yrs. Yes spent a thou or so to make bullet proof. I used a couple of engines and carb rebuilds but it's the best nitro monster truck and lots of fun. Stainless steel brake kit a must it might come with one nut mine didn't it was a 4.6 x and I up graded it to make an xl. There are kits that make it low like a truggy for better handling but with Integy piggyback shocks 80 to 100 wt oil and wide tires it will handle like a Kraton at high speeds. Sometimes I think it handles better. So much fun once they are really heavy duty.
That was my experience with the savage gt6 nitro…repairing anything was a nightmare because screws would round off….and it needed a lot of repairing.
Glad to see the nitro content coming back
Hey Kevin just a heads up to get those screws out all you have to do is drill out the head strait ass possible breaking the heads off then you can take the cover off and use vice grips to take the remaining screws out. 😊
If you have a Dremel with a cutting disc, cut a groove on the head of the bolt and use a large flat headed screwdriver to unscrew the bolt. Works 99.9% of the time.
nitro is the best, Ive had good luck with my slayer pro, 3rd engine now, 1st one was great 2nd blew crankshaft hopefully this 3rd will be a good one, got pretty good at tuning it, use temp gauge helped. kevin channel is the best one on youtube, greetings from northern michigan
The 3 speed transmission was very cool on this..
I can smell the nitro
@2:49 I dig the Jazz Manouche!
great video - i really enjoy the ones where there's a bit of wrenching, a bit of bashing, a few zipties, more bashing, then "it's getting it now"! 😅
2:03 I usually hammer in a torx bit that is just barely too big to fit. I think a T9 works best for the 2mm hex driven screws.
Great video, I like that you give your honest opinion good or bad!!!! I've been running HPI savage for years and back then you could get the kit version.! To date myself, my newest savage is a SS.25 kit.😁 and it's a beast!!!!!
This RC sounds awesome and wow the 5.9 had enough in it to do a backflip.
Great video I like Nitros 👍
Nice done with upgrades and make your Savage XL run again. I have had problems more than ones with stripped hex screw holes. I use a dremel tool and cut a groove and use a flat screw driver to get the screw out. It gets little damage with the groove outsid the screw on the material outside but that´s the only solution I´ve come up with since I don´t own a weld.
I have an HPI savage I converted to electric with castle motor and mamba 8s. It has an alza 1/6 aluminum frame. Had to make my own drive lines cuz alza doesn’t have anymore. I had it as nitro for years and loved it! Your always going to upgrade if your into RC’s. If you don’t…. You should lol
Love this. Lets see some more of the savage!
Another nice video Kev. I remember in one of your old videos you drove the redfin Dual Brushless motor kyosho fo-xx. Have thought about doing such build?
I've been through that most screws are soft and strip. I just drill the heads remove the gear then take a pair of small vicegrips . Lock them on and twist out the screws. It does work.... Sean pendragon.
Great video mate, been waiting for this one
Great video nitros are fun but can be fussy and definitely more messy than battery powered RC's,and the fact now you pay alot for some of these car's and there are assembly problems from the factory where you basically have to go through the car and checking every nut and screw,so your first one goes well is tiresome. To bad they don't have the option to buy a kit so as you build you can check everything and locktite what is needed.
Glad you got it sorted Kev, Next time you have it out can you get some more video of it changing in to all 3 gears please :) Maybe on a speed run on tarmac?
Have you had to tweak them much since fixing / resetting them?
I totally agree about the nitro's when running well. I'd love to see more nitro or maybe a separate channel?
Agreed! I can never part ways from my Nitro even though they do take some work to startup! Electric is flip the switches and run!!
Love the vids Kev keep them coming
If you think about it, most rc have issues. The 2wd slash is too light on the front, but adjusting the spring tension only puts more weight on the rear.
There is something special about the sound of a Savage! I really need to get my 4.6 out more!
Hello MadmanJnr:) Tomorrow it is christmas calender sale on the 1/10 of this rc, but the newest version and elec rc not nitro. 300 dollar. should i by it? XS Flux VGJR
Sry my bad english
I'm shure somebody's suggested this before but you should build a battle bot think that would be sweet love the videos keep up the good work
To get off some stripped out screws, you can super glue a screw driver to the screw and undo it. It works most of the time for me
Hey kev love the vids. Could you please do more nitro videos they make my day👍👍
Nice to see Kev so excited about a car. I agree about nitro. 1/8 nitro buggy doing big jumps on a track is my favourite rc thing. Electric is great for carpet racing but nitro is more of a spectacle. 1/5 gas is a bit too much of a spectacle judging by people covering their ears when Kev starts the raminator.
This vid and the Kyosho inferno gt one are the best vids in your library!!!!
That Savage Octane motor looks enormous! Never even heard of that car, cant wait to see it rip.
That's cuz it's a 2 stroke gasoline engine not a nitro powered big difference
for the stripped diff screws, just dremel a slot in the screw and use a flat blade screw driver to get it out.
The servo should be assembled and turned on to make sure it’s at zero also the servo saver or spacer must be installed but not tightened to much. When the servo is centered then install linkages lightly.
Yeah same experience.
Bought mine new 10+ years ago and used it 3 times before all the same problems appeared.
Now it's a shed ornament.
Savages are my favorite as well! I have an X haven’t used it in awhile
Great video, now convinced to get at least one nitro car
Stripped screw heads: I have one of those ratchet screwdriver kits with a heap of different drive bits in it. I get a random security screw drive bit and jam it into the hex hole. It usuallyu gets them out.
Loved watching this. Hoping to get a savage xl soon. Keep ripping Kevin
Kind of surprised you fried the sintered gear in that. I never had issues with the sintered BP gears in my nitro savage even after I put a few gallons through it. Then again, it was the older stuff from a decade ago, maybe they changed their manufacturing process or place that makes the gears.
PSA for anyone looking to buy hpi have fixed the gearboxes, me and others who have purchased find they work out the box, however, you need to upgrade the steering servos immediately they absolutely don't last, also be sure to locktite the grubscrew that holds 3rd gear to the gearbox pin, apart from that mines been fantastic!
That thing rips
I love the body shell u put on an kev keep up the great work
Everyone loves your vid man😁😁😁😁😉😉😉😉😀😀😀😀
Absolutely love it . Tbh im a hpi fan too