Apollo z40 Nibbi Carburetor +Carbon muffler install *testride

Sdílet
Vložit
  • čas přidán 18. 06. 2023

Komentáře • 54

  • @ivangtzz7113
    @ivangtzz7113 Před rokem

    Fire vid ma boy 🔥🔥🔥

  • @phil_goodluck3914
    @phil_goodluck3914 Před 9 měsíci +1

    Keep posting bro 🔥

    • @jbuketss
      @jbuketss  Před 9 měsíci

      hy bro got a new vid on the way🔥 appreciate the support means alot💯

  • @teshuvahemmet3036
    @teshuvahemmet3036 Před 6 měsíci +2

    IT sounds great 👍

  • @Mrhandsome25659
    @Mrhandsome25659 Před 2 měsíci +1

    This reminds me of gta just cruising around with commentary

  • @evoquesquad2015
    @evoquesquad2015 Před 9 měsíci +1

  • @fatburga
    @fatburga Před 8 měsíci +2

    Even a bike light

  • @imagine9375
    @imagine9375 Před 7 měsíci +2

    Dang, kids at the playground ain't what they used to be. These GMO's
    Get a headlight my guy..

  • @Bagchaser352
    @Bagchaser352 Před 11 měsíci +2

    Keep posting

    • @lilperk5
      @lilperk5 Před 11 měsíci +1

      Just got four bikes I’m about to start uploading

    • @jbuketss
      @jbuketss  Před 11 měsíci

      hy which models did you get??

  • @itsyoufriend2509
    @itsyoufriend2509 Před měsícem

    What parts did u get and what size ?

  • @blackjesus440
    @blackjesus440 Před 11 měsíci +2

    What would be better the 24mm or the 26mm nibbi carb I have the same bike and tryin to figure which route to go. Did u have to make any adjustments to the jets or was it plug and play 🤔

    • @jbuketss
      @jbuketss  Před 11 měsíci +1

      26mm is way better really opens up the bike got a new video cookin up 60+ mph, i did have to play around with the jets but once air/fuel ratio is good bike runs perfect👍

    • @blackjesus440
      @blackjesus440 Před 11 měsíci +1

      @@jbuketss appreciate the info bro I’m revamping mine as we speak ordered new custom decal stickers ,got street tires on it now and I’m going to put the flush light street legal kit on it.I deleted the air box completely and put the Uni Filter UP-4182AST 15 degree pod filter on it and about to change the sprocket debating on if I want more power or speed

    • @blackjesus440
      @blackjesus440 Před 11 měsíci +1

      And u right the first gear is trash on this bike 😂😂😂😂 hate it i come out of 2nd

    • @kylestoner2059
      @kylestoner2059 Před 5 měsíci

      Do you remember what size jets you went with? What's your elevation where you're at?

  • @phil_goodluck3914
    @phil_goodluck3914 Před 6 měsíci +1

    Bro how come you didn’t put your graphic kit back over the exhaust it doesn’t fit back on or something? Or you just like it like that

    • @jbuketss
      @jbuketss  Před 6 měsíci

      i took it off, I just think it looks a little better like that but yes it will fit back on‼️

  • @evoquesquad2015
    @evoquesquad2015 Před 9 měsíci +1

    put a 17 T sprocket for more top speed 🚀🚀🚀

  • @ITrunkzI
    @ITrunkzI Před 3 měsíci +1

    Cullen park👌👌

  • @dabaroonitime6613
    @dabaroonitime6613 Před 4 měsíci +1

    Hey bro how did u end up tuning the new carb? I’m having trouble with mine

    • @jbuketss
      @jbuketss  Před 4 měsíci

      yess you have to tune it and put correct jets took me around 15-25 minutes to get it running good with no bogging and good idle

    • @mr.boost3d528
      @mr.boost3d528 Před měsícem

      What jets did you run? Just bought a z40 and a new nibbi and it bogs a little on bottom with a 98/100

  • @Tingu231
    @Tingu231 Před 3 měsíci +1

    did you mount the new exhaust to the old one?

    • @jbuketss
      @jbuketss  Před 3 měsíci

      yes used the same hanger/bolt as well

  • @camerondrayton601
    @camerondrayton601 Před 11 měsíci +1

    Is the read shock good or do I need to replace it

    • @jbuketss
      @jbuketss  Před 11 měsíci +1

      rear shock seams very solid i adjusted mine to a good rate just have to find the right stiffness you are looking for, but i am still running stock shock might replace it in the near future.

  • @jonathantamari7964
    @jonathantamari7964 Před měsícem +1

    Can u put the link to where u got the carburetor kit

    • @jbuketss
      @jbuketss  Před 27 dny

      NIBBI Carburetor PE24mm, Fits... www.amazon.com/dp/B09Y924JP8?ref=ppx_pop_mob_ap_share

  • @ProcompilationsDB
    @ProcompilationsDB Před 8 měsíci +1

    where you get that exhaust at?

    • @jbuketss
      @jbuketss  Před 8 měsíci

      Universal 1.5" Inlet Stainless... www.amazon.com/dp/B083HZXYX3?ref=ppx_pop_mob_ap_share

  • @phil_goodluck3914
    @phil_goodluck3914 Před 9 měsíci +1

    Where you get that exhaust from bro🔥🔥🔥

    • @jbuketss
      @jbuketss  Před 9 měsíci

      Universal 1.5" Inlet Stainless Steel Exhaust Muffler Baffle with Removable DB Killer Slip on Dirt Pit Street Bike 125cc Motorcycle Scooter ATV,SIZE:Length 330mmX Dia.98mm a.co/d/e5tTCDe

    • @georgelaw92
      @georgelaw92 Před 9 měsíci

      Where did you get the rubber connector for it

    • @jbuketss
      @jbuketss  Před 8 měsíci

      @@georgelaw92 should come in the kit brother👍

  • @laythzeitawi1148
    @laythzeitawi1148 Před 5 měsíci +1

    Whats the name of the bar hand guards?

    • @jbuketss
      @jbuketss  Před 5 měsíci +1

      22mm 28mm Motorcycle Handguard... www.amazon.com/dp/B07DS56SWX?ref=ppx_pop_mob_ap_share

  • @logantownsend1524
    @logantownsend1524 Před 3 měsíci +1

    What size jet you put in???

    • @jbuketss
      @jbuketss  Před 3 měsíci

      don't remember exactly but it should come in a pack of 3 , and i installed the middle size jet a little bigger then the oem.👍

  • @fatburga
    @fatburga Před 8 měsíci +1

    U need a light bar on front

    • @jbuketss
      @jbuketss  Před 8 měsíci

      bro i bought one already but i haven't installed it 😭

  • @rogerpage7029
    @rogerpage7029 Před 6 měsíci +1

    Is that the street legal apollo

    • @jbuketss
      @jbuketss  Před 6 měsíci

      This one is non street legal but you can make it legal and register it 👍

  • @Rippinandfishin
    @Rippinandfishin Před 7 měsíci +1

    Has the motor been reliable?

    • @jbuketss
      @jbuketss  Před 7 měsíci

      Honestly much more reliable then expected turns on 1st kick everytime brother🤙

    • @Rippinandfishin
      @Rippinandfishin Před 7 měsíci +1

      @@jbuketss what top speed u getting with the new carb?

    • @jbuketss
      @jbuketss  Před 7 měsíci

      With nibbi carb and different sprockets im doing 68 mph new video coming soon🤙

    • @mohammadallouh4714
      @mohammadallouh4714 Před 4 měsíci

      i have the same bike what sprockets are u runing@@jbuketss

  • @bmx4life367
    @bmx4life367 Před 5 měsíci +1

    What cc is that pit bike brutha???