S07E04 3D Printed Hydroponic Grow Tower for 5 Gallon Buckets 🪣 🧐 Update-60 MPH Gusts of Wind!!! 😲
Vložit
- čas přidán 3. 02. 2024
- The tower parts I printed from here:
www.printables.com/model/7200...
The 5 gallon bucket adapter I printer from here:
www.thingiverse.com/thing:458...
Camera1: iPhone 14 Pro Max
Camera2: GoPro Hero 9 with Media Mod
Sound: Rode VideoMicro
Lighting: ULANZI VL49 LED Video Light
Rigging: ULANZI U Rig Pro
Editing Software: iMovie
Picking mine back up after a year. Always had great success with it. Best of luck!
This looks awesome. The only thing I notice is that when you add the spacer, the next tree section is on the same line as the one below it. Whoever created the stls should have adjusted the top spacer slot so that when you put the next tree, it's not aligned right above the previous one. I'm just learning about all of this and don't know how to adjust an stl file that much, so for now, I'll either print two spacers or no spacers for near the top, since I'd just plant basil and mint and things like that that don't need a ton of space.
@@dontbanmebrodontbanme5403 Are you using the smaller of the 3 adapters? You may be able to use the slicing software and cut it in half and rotate it. I may try that for giggles after my next print is done.
I took a look at the original 40mm spacer and it appears to be orienting each branch correctly. Are you using a different size or did you get the mesh 40mm spacer remix? That one does appear to be wonky. I assumed both were wrong and modified them. I was just taking pictures to upload to MakerWorld and noticed the "original" appears correct.
where can i find the stl files for this?
The tower parts I printed from here:
www.printables.com/model/720081-modular-hydroponic-tower
The 5 gallon bucket adapter I printer from here:
www.thingiverse.com/thing:4580194
I printed all the parts in PETG.
@@brianv_official oh thanks, somehow i looked for an hour without finding it:)