Learn Stainless Steel Top 7 Stick/Arc welding Hacks and Tips to improve your Work / Brilliant idea
Vložit
- čas přidán 22. 08. 2024
- 𝐇𝐢 𝐠𝐮𝐲𝐬, this video is all about some tips and tricks I often used in my stainless steel welding.
In my past, I built a lot of stainless steel projects with a stick welder and as time pasts it teaches a lot and this video is all about those things. There are only two ways to do good welding on stainless steel. One is either getting a tig welding machine and do it inexpensively ways or the second is improving your skills to ease the welding work. There is one more method in which you can convert your regular stick welding machine into a tig welding machine just with few basic things and this trick is definitely effective. Definitely, there is some amount of argon gas wasted but I think If you have builds with thin sheets over some area then this tip will help you a lot.
𝐂𝐨𝐧𝐯𝐞𝐫𝐭 𝐒𝐭𝐢𝐜𝐤 𝐰𝐞𝐥𝐝𝐞𝐫 𝐢𝐧𝐭𝐨 𝐓𝐢𝐠 𝐰𝐞𝐥𝐝𝐞𝐫
𝐓𝐞𝐬𝐭 𝐆𝐫𝐚𝐝𝐞 𝐨𝐟 𝐒𝐭𝐚𝐢𝐧𝐥𝐞𝐬𝐬 𝐬𝐭𝐞𝐞𝐥 𝐦𝐞𝐭𝐚𝐥
If you bought a product and ever have doubted that what grade it has then you should definitely need to know this. There is a grade tester chemical available in the market which is called grade tester, just simply pour it onto the workpiece and if it contains more iron content then it changes to red color and it belongs to 202 grade.
Stainless steel Grade Tester Dye
www.indiamart....
𝐖𝐞𝐥𝐝 𝐓𝐡𝐢𝐧 𝐬𝐡𝐞𝐞𝐭 𝐰𝐢𝐭𝐡 𝐬𝐭𝐢𝐜𝐤 𝐰𝐞𝐥𝐝𝐞𝐫
Welding thin sheets is a bit more tricky and one good method I found and learn from pother welder is by changing the polarity of the holder and the earthing clamp. Definitely recommend you try out this strategy.
𝐔𝐬𝐞 𝐨𝐟 𝐩𝐢𝐜𝐤𝐥𝐢𝐧𝐠 𝐚𝐠𝐞𝐧𝐭 𝐭𝐨 𝐫𝐞𝐦𝐨𝐯𝐞 𝐛𝐥𝐚𝐜𝐤 𝐨𝐱𝐢𝐝𝐞 𝐟𝐫𝐨𝐦 𝐰𝐞𝐥𝐝 𝐣𝐨𝐢𝐧𝐭
Sometimes during welding there are hard-to-reach areas where it's difficult to grind the welded surface in those areas it's always good to use a pickling agent and leave it for 30-45 minutes and it's done. You have a surface free from black oxide.
Pickling Agent (Weld bright)
www.indiamart....
𝐰𝐞𝐥𝐝 𝐓𝐡𝐢𝐧 𝐭𝐮𝐛𝐢𝐧𝐠 𝐰𝐢𝐭𝐡𝐨𝐮𝐭 𝐬𝐚𝐠𝐠𝐢𝐧𝐠 𝐟𝐫𝐨𝐦 𝐰𝐞𝐥𝐝 𝐣𝐨𝐢𝐧𝐭
In thin tubing often material gets sagged during excessive heat and you avoid that its good to have a sheet in the middle of the joint which is going to avoid the sagging and usually it will not matter if you are going to keep it as it is. But if you are going to polish it the sagged joint reflects the light differently.
𝐅𝐢𝐥𝐥 𝐁𝐥𝐨𝐰 𝐡𝐨𝐥𝐞 𝐰𝐢𝐭𝐡 𝐒𝐭𝐢𝐜𝐤 𝐰𝐞𝐥𝐝𝐞𝐫
Filling the gaps looks difficult but it's very easy to do. The key to success is to minimize the air gap and weld it normally. At first it is not going to look pretty and that's normal but if you follow the three rules then it's a sure success Weld, cool, Clean.
These all Tricks will help to any beginner welder or amature welders. In this tips I explain all tips which you can use in your daily welding work. I hope you will learn something out of this video and my video will help you in your work. whatever product i used in my video i will add in the description section. whatever help you required related to welding tips you can ask me via comment down below. subscribe for more Tricks tips like that.
#stinlesssteel #stainlesssteelwelding #weldingtips
This project is very good!
Impresionante como suelda lastima que se deberia cambiar el pico para convertirlo a plasma y cortar bro thank Arg
Welding without gloves, that is so smart.
What is the role of the spark?
Excelente trabajo mi estimado amigo 👌
Pero estaría bien que le pusieras más opciones de idiomas para los que no sabemos inglés.
Por cierto, me encantó la adaptación que hiciste para soldadura TIG.
Felicitaciones 🍾
Thank you..
All my respect dear friend
This one can possible for aluminum.. please reply
No
How can i wel aluminum??
Very good
Plz. Make separate video on fusion welding...
Bro can you please tellme price of welding holder and where to buy
I am interested too pls
I have the welding machine already.....
Amazing.
هل ممكن الإستغناء على الغاز ؟وماهو دوره؟
Inovatif creative welder
You are genius brother. ❤
You are master
Pak ramti dwa!
hola si no tengo gas ,se puede
Do you make diy auto batteries also?
nice.
Hi, I have a question here whether the plasma cutter burner will work from a conventional mm inverter🤔
Yes, can be made.
Süper
Very informative video and well put together bro , thank you 🙏🙏
Very interestig video ,teach a lot of useful tips
Thanks for the feedback:)
👍good mtr
Nice work bro
available at ?
Sir,for stainless steel mirror finishing please suggest that soap and buffing ,cream description
czcams.com/video/HTSRRzE4tOw/video.html
You can check my this video for soap and mirror finish
Also I can't find pickling agent and grade tester in local market, where can I get both of them and what will be the price? Thx for nice demonstration 👍👍👍❤️❤️
You can find both these products on India Mart. And the positive and negative terminal can be found with clamp meter or with Multimeter. Red one is positive and black is negative, keep it on dc voltage measurements and check with it.
@@ambroscustom lo99
Thanks
Oky 👍👍👍
thanks sir madami akong natutunan sa isang vedio lng, saan po nakakabili ng wellbrigh sir?
Weld bright I purchased locally. You can search pickling agent. It will be available in your country.
Aciu patinka! 👍
If you buy manual tig same as you made you forget to put valve on hose for argon..
Yeah buddy that's really necessary but I would prefer solenoid gas valve to do the job just like the on comes in tig torch that will shut down automatically once I release the button.
It is good.👍👍👍
Is this how it works? DC only or also AC
Dear, I didn't test it on ac.
Bro I just want to know the price of argon gas tank .and refilling price..I may buy a ibell Tig but..I am not understanding Where To buy Argon cylinder and accessories
Only cylinder cost of 7 cubic meter will cost 7000-8000 INR. And cost of argon gas will be 1400-1500/-. You can purchase all these from industrial gas supplyer. Seach on google for nearby dealer. You also need to buy gas regulator with flow controller for your cylinder.
А, в чём проблема, купить нормальную горелку🤔
Отлично !!!
Como se llama este tipo de soldadura me interesa saber gracias
Soldadura TIG
Bro please make on "How to make satin finish in stainless steel round and square pipe"
Video already made you can check my channel page.
@@ambroscustom thank you bro😃
efficient soldering iron
My ibell 220 arc welder has positive and negative label outside inverter from what it is labeled Inside, pcb labeled positive side as negative, and negative side as positive, now I'm confused that is my welder DCEP OR DCEN any idea how can i confirm polarity?
if its a chinese brand u hv yo answer if not just a factories mistake maybe
молодец, без слов понятно
Только газ какой не понятно..
Bom dia meu eu quero montar um sistema de gostaria muito que você podece me ajudar me formado que pessoas eu tenho que comprar
Please tell me how I can help you..
Whats name the spray●?
A maquina enversora ou gerador
The idea itself has a right to be. But to use aluminum, and cover it with copper.... At least not smart.
Sir can I conect with compreser or no? Rep. Me please!
No dear it will melt the tungsten because of oxygen. Only Argon cylinder needs to be attached because it's inert.
@@ambroscustom Very,very Thanks for reply, Okay Friend, Good Day 👍
🙏🙏
Disculpe q gas el de la vótella o no
What the crazy. Westin my time.
Thank you for time.
How much voltage for this welding machine?
Max. it can go upto 200 amps and its a single phase machine.
What use gass
Argon
@@ambroscustom argon gass eka gene gannawada
Could not understand your wording.
❤️❤️❤️❤️❤️❤️❤️❤️
Cómo se llama. El líquido que pones para revelar la soldadura.
amigo se llama agente de decapado. se utiliza a menudo en acero inoxidable para eliminar las marcas de quemaduras en acero inoxidable.
😊👍👍👍👍👍
buy it-argon arc machine Cebora WIN TIG AC-DC 180M
and don't make yourself a brain)
Why repeat what the other has already done and showed?
Is this a comedy video?
🆙🆙🆙🇧🇷🇧🇷🇧🇷💯💯💯🍯🍯🍯
De nada sirve que le cambies los cables el positivo por el negativo si no cambias la polaridad de la máquina por qué el positivo sigue siendo positivo y así se dicen soldadores de dónde son otra cosa esos cordones están bien feos ni soldador eres