Bulldog Dampf und Diesel - die Stationärmotoren - 2/4 - Stationary Engine Rally
Vložit
- čas přidán 26. 07. 2017
- Alle zwei Jahre findet in Markkleeberg bei Leipzig das größte Traktoren und Stationärmotorentreffen Deutschlands statt.
regelmässig werden dann über eintausend Traktoren, LKW, Stationärmotoren und andere landwirtschaftliche Geräte ausgestellt.
Die Aussteller der Motoren geben sich meistens besonders viel Mühe und zeigen historische Aufbauten zur Getreidebearbeitung, zum Steine brechen oder Häcksler die Stroh klein schneiden.
Ach besonders einfallsreiche Gerätschaften wie per Stationärmotor angetriebene Getränkekühler waren zu sehen.
Das ist der erste von vier Teilen über die Stationärmotoren.
Viel Spaß! - Věda a technologie
The hay cutting matching clops like a horse.
The engine on wheels @ 7:22 is awesome and funny.
The water motor at 8:30 is a funny muffler and very effective.
The editing is skilled, peaceful, and well paced.
Thanks again for these videos. So nicely filmed and edited, good pace. Happy to sit with a pack of beers and watch these all night! Your shows in Germany are much better than England - much better mix of engines.
Sehr schönes Video, lieber Jörg, vom Stationärmotorentreffen in Markkleeberg.
Da gab es ja viel zu sehen, vor allem die alten Schätze die immer noch funktionieren.
Vielen Dank, Daumen sehr weit nach Oben,
viele liebe Grüße und ein schönes Wochenende
wünscht Dir
Andreas
Fffyz7hllapzl
When I was very young I saw a warehouse with a house size engine outside one wall. It had a pipe about one foot in diameter connected to the crankshaft. The pipe ran the length of the back wall, it was very long. As guess, about 100 yards. On the far wall was a pillar-box/bearing that held that end. Along the full length dropping from above where multiple 6"-10" belts. They had an idler pulley attached to the near end of a long arm. On the short end there was a bag like to hold sand or gravel to apply pressure to the belt. On the long end was a chain with a handle to pull up on the counterweight. It was a man's... boy's job, as a man would be to big to fit, to run back and forth engaging and disengaging the belts.
The engine had been modified to run a generator. Bare copper rods about an inch or two in diameter also ran the back wall. There was a splat stain that you could tell was made by a boy sized and shaped object that had been caught in a belt then fried to a wall.
Place scared the living $#!t out of me.
How does that water motor work?
Water is for cooling
amazing that belt stays on
5:45
What this machine does?
Mihailo Popovic
can anyone explain to me what is it and what it does?? At 8:08
It's an engine
Hy Aleksey. This is an engine that is normally powerd by a hydraulic system. The connecting rod and the piston seem to be one piece. That makes the cylinder wobble as it turns the crank. The moving cylinder controls the inlet and outlet. Simple steam engines ar constructed in the same way. In this case the engine is powered by the exaust pressure of another engine. You can see the pressure hose connected to it. At least this is what the german sighn tells me.
Greetings from Germany
Thank you Fminus104 Germans can engineer anything!
Hätte ich das bloß schon mal ne Woche eher mitbekommen. Ich wohne in Grimma nahe Leipzig bzw. Markkleeberg.
+Commander Baccara Mist. Da hast du aber was verpasst. Das Nächste ist 2019.
Bidone1967 Danke :)
Alat yg bàgus👍
6:39 El consolador mas grande del mundo
ok
hi bidon what is the laanguage i means where u from or these video uploaded from who country
+lon ly Hi. The videos are from Germany.
you are tremendous u r giving answers with care i m live in pakistan can we get here ur equipment or ur equipment are available in pk ` i think that germon quality is more better
+lon ly Hi. Its from Germany and the Language is german.
6:40 dancing machine What machine is?
Where is the safety fencing to keep the visiting public from the machinery?
Germans aren't as stupid as americans so they dont need that