$450 2006 KLX110 TRANSFORMATION
Vložit
- čas přidán 11. 04. 2020
- This 2006 KLX110 required lots of welding, modifying, and reworking to make the newer style plastics fit to give it that modern look. I wanted a pitbike to match my KX125 & KX250 I did for Racer X. I feel like I was successful. Check out my Instagram profile to see the other bikes.
Instagram name: fischer927
Bike Build Link www.vitalmx.com/community/Fis...
Parts List
Tbolt USA
www.tboltusa.com
V2 Race Head
TB Parts143cc Big Bore Cylinder
TB Parts New Piston & Rings
TB Parts Dress Up Kit
Two Bros Front Sprocket Case Saver
Two Bros Triple Clamps/Bar Mounts
Two Bros Heavy duty pegs
BBR Tall Seat
BBR Skid Plate
VM26 Carb
Magura Hydraulic Clutch
UFO Plastics
www.ufoplasticusa.com
Full plastics kit
Motoseat
www.motoseat.com
Custom gripper seat cover
Powersports Nation
www.powersportsnation.com
OEM parts
Pro Circuit Exhaust System
Pro Circuit
www.procircuit.com
Full Exhaust System
Renthal
www.renthal.com
White/green bar pad
Grips half waffle
Elusive Graphics
www.elusivegraphics.com
Full set of custom graphics
VP Fuels
www.vpracingfuels.com
C12 fuel
All Balls Racing
www.allballsracing.com
S
wing arm bearing kit
Wheel Bearings
Dunlop
www.dunlopmotorcycle.com
Geomax MX33 Rear tire
Geomax MX33 Front tire
Industrial Plating
All powder coat and different
Coatings throughout the bike
Wings Moto
Red Handlebars -Only Red Bars I
Could Find To Match
Outlaw Racing
www.outlawracingproducts.com
Shifter
Music:
Happy by jantrax | / jantr4x
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
Green by jantrax | / jantr4x
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
2:59 AM by jantrax | / jantr4x
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/... - Sport
Oh man!!! Killer job that thing looks better than my 2024 🔥
Dude you're a frickin Jedi!
Justin Jenny haha thank you👍
Mate this is actually insane mate keep it up 🔥👊🏻
WTF !!! It's icredible rebuild. I'm in love
SUUUUUBBBB
Thanks!
The 3 matching bikes are out of this world. Crazy amount of work, well done man! Can't wait to see what you have in store for the next project haha.
Greg Hitchko thanks Greg! Super happy with how this one turned out👍 there will be more coming for sure.
consider checking out my channel! i make similar content:) i’m currently building a klx110
those red bars kinda hittin different 🤘🔥
That's a sick ride! Nice job!!
Thanks man I appreciate that!
Freaking nailed it man! Looks awesome
Thank you! I appreciate that
Hell yeah bro, sick bike.
Watched from beginning to end. Nice work man 👌🏽
Incredible work
Nice job man love the build👍
Thank you! I appreciate that
That thing is so badass great work man
Thank you!
Awesome build & final result, you obviously know what you’re doing. But Damn some explanation/narration would be nice.
Eddie P thank you👍 feel free to shoot me an email and I’ll answer any questions you have.
Mfischer927@gmail.com
Sick little bike build
Thank you!
Thats awesome bro.
super sick!
Nice build
Arthritis and repetitive stress injuries suck. I envy you.
SO DOPE🔥
Wow !👌👌🔥
beautiful
I really dig this build man! very clean! good job bro!
McNew Motorsports thank you! I appreciate that👍
Great video put out some more!
Ayyye niice!!! Its Philly pipedream from Instagram with the 03 kx125 and 04 kx250 !
PHiLLYONAIR hey man! Glad you found my video👍
nice job bro, maybe my next project
Thank you!
I bought ycf start 125cc for 380$ and it works great.
Really good videos man ! I don’t know how you only got 59subscibers, like I thought you had at least 35k when I was about to check....
[VR] vadym Moto thank you! I appreciate that👍 not really sure why it’s so low. I could probably be more proactive in sharing my content and getting it out there. I’ll get there eventually! Thank for watching though
only 212 subs? bruh you deserve way more
Haha thank you! Just need to keep growing it.
Show us a vid of you riding it, love the build man
Thank you! I’ve only ridden it a couple times lol I’ll get some footage eventually riding it
Nice.......
Vp race grace in the pitter damn I only use that stuff on my race bike😂
Mike Martinez haha only the best for this one!
nice
🙌🙌🙌🔥🔥🔥🔥🔥🔥🔥🔥
Incredible build. Thanks for the vid and ideas. Do you have a link to that carbon wrap you put on the forks?
Shred City a buddy gave it to me, I can ask him and see if he remembers where he got it from👍
Great job on the build. Where did you get the Dunlop tire decals?
Really one of the only way to get the tire stickers is asking the guys at the Dunlop semi for them like at the nationals or a supercross
Where do you get the Dunlop tires tire decals from?
Sick build where did u get the plastics kit?
Did you get a 2010+ gas tank to get the shrouds to fit correctly or do they fit with the older style tanks?
What forks and shock did you have? Just got an 08 and planning on doing basically the same treatment you gave yours.
✊🏻⚔️👏🏻👏🏻👏🏻
Do you have a link for the plastics because I have an 09 but can’t find any that look pointy like that and aren’t as rounded that fit any older than 2010
Yo sick build. You using the bike or is it for display or something ?
I’ve ridden it a few times but mainly display lol
@@Fischer927 nice the build looks insane btw
Rear shock? I'm doing my son's 110 right now and what you used looks like the way to go
The shock I used came on another bike I bought so I’m not sure if they still sell them or not. All it said on it was Works Performance. Then I used a 110L swing arm and a shock extender from Tboltusa
tboltusa.com/store/pit-bike-rear-shock-extender-p-1067.html
💜👍
Did you use stocks tire an rims sizes? Sick 👍
Yeah I did! Those are stock rims, hubs, and spokes. Rims and hubs are powder coated
How did you make the new plastics fit
What cradle fits with the two bros peg bar mount?
Did you have to do any trimming on the number plates and did you have to drill front fender ??
I ended up using a triple clamp from a 2010 klx110. The stock one will work though from older years, I know the back bolt holes will line up, might need to drill the front ones.
Awesome looking bike, 1 question tho, are you not worried that you cut off the bracket that used to hold the old style rear fender ? Seems like it was a good support for the frame ?
Thank you! I think it’s fine, I’m sure could probably get around not cutting it out if i did it again. Otherwise probably wouldn’t be bad to weld up something new for it.
@@Fischer927 Alright thanks, I'm planning on doing the newer plastics this winter too, I pretty much know what to modify but your video is really helpfull !
🏁💨💨💨👌👍🏻
So was all the brackets and welding just to fit newer style plastics?
I want to rebuild mine as well, how do you know where everything goes any advice or are you like a mechanic?
Where do you get those Dunlop stickers from
Some bike shops
Are u Raymond Warner because I'm your biggest fan
How much was it to rebuild the motor I need my motor rebuilt need to find someone to do it for me.
You left the centrifugal clutch in
Its a very good build its beautiful but a 110? Cmon man slap a 190 daytona in that thing🔥
It does have a big bore👍
you should edit the end to have the before and after side by side, also you paid 450$ but how much did it cost in total
Didnt it have much for before pictures of it. Didn’t decide to record till I started tearing into it. Not sure on total cost, I would to go through too many emails and receipts to add it up lol. Thanks for watching though!
Bro I wish my Facebook market place wasn’t so wack. CA prices are expensive af. Same bike would have costed a grand rn haha
haha yeah i got ppl listing their 2015 klx 110s for more then a brand new 2022 klx 110
Same, I've been seeing early 2000's 110's being sold for $1,500 and $2,000. I'm just like that's too much for a bike that's 15+ years old.
I thought you had a $450 budget to transform it. Looks great.
Hayes Center no that’s what I bought it for. Thanks though!
Very nice build what renthal bars are those
Kevin B actually not Renthal bars. Couldn’t find red ones like I wanted so they just have the Renthal Pad👍
consider checking out my channel! i make similar content:) i’m currently building a klx110
Sick
What sizes jets did u use
I want these same graphics for my klx 110 how can I order them?
What size wheel setup is this
How many gears does it have
Can you buy all the wires and cdi and all that stuff cause I can’t find it anywhere
Michael Cowley id say do a search on eBay. Might be able to find a used setup.
so dialed!
What did you film this on
GoPro Hero 4
Where you from
Did you have to get the newer style gas tank and seat for the plastic conversion ?
Mikey Neese the seat is still the same on both styles. You can make the old tank work but I used a newer style tank because I had one available at the time.
Cool did you have to make any additional mounts?
Mikey Neese I did have to bend and weld up a couple little brackets. If you go to the 13 minute mark in the video you can see that’s where I am making them.
Thanks!
Should I get the regular 110 man or the 110L for my build ?
I prefer the 110L, but depends on how much you will be doing. If you are going to do new suspension or even swing arm it doesnt really matter which one you get. Whichever one you get i'm sure you will have a blast with it!
consider checking out my channel! i make similar content:) i’m currently building a klx110
Esta vi en chida yo quiero una jaja
I got an 05
Just got one 2 days ago
Awesome build mate.
Where did you get the DUNLOP tire stickers?
bikes are so cool. Nice work
How much IFC got Thailand
I wanna know what site you paid $450 for this bike bc that's insanely low from what I've seen out there? And what what was roughly the total you put into it?
I paid 1300$ for mine
Hey man, can you tell the name of the song here 13:11 ?
I’m not sure which one it is but the song links are in the description.
how did u get the new plastics to fit on the bike ?
Lots cutting and welding the mounting brackets. Check out the video I have videos throughout of me doing so👍
where is your chain from?
i’m lookin for a golden one
How
Put a fmf pipe on it
How do you bleed the clutch?
I don’t even remember the exact steps I was so frustrated with it haha. Lots of time getting that to work correctly
@@Fischer927 I actually figured it out and if you need any help just hit the Instagram DM and I’ll get you video/instructions
Cant get no off road bike in england for that price unless its a pit bike
Where are the graphics from?
They are from Elusive Graphics. I don’t think they are in business anymore. I use Decal Works for everything now and it’s been great!
i got the exact same bike but for 400 buxs
CrazyDirtBikeBoy cool man! Let’s see the transformation now
@@Fischer927 im only 12, but i did do a carb rebuild. click on my photo to see
Where did you order graphics?? And where did you find the pro circuit pipe ?
consider checking out my channel! i make similar content:) i’m currently building a klx110
@@marshallhaourtt no
Sorry for such a delay on this! They are done by Elusive Graphics. Not sure who would have pipes in stock right now. I got my from Tbolt
how in the hell did you find a klx 110 for 450$ im so jellos i cant find any for under like 3000
Good find on Facebook marketplace a few years ago. It was also all in pieces pretty much
No way I think I might of just found a guy who will trade his 110 for a proper bike I have😁
Yo la compro
name song min 7:46? thanks
Is that stock forks
SNH Zay yeah they are off a 110L . Hoping to upgrade them at some point👍
consider checking out my channel! i make similar content:) i’m currently building a klx110
@@marshallhaourtt Bruh stop plugging your channel on other peoples, its wrong dont do it.
Can you please be my mechanic
I gave mine away and bought a new L model
How did the only cost 450.00??
The original bike was $450. Much more than that in the whole project
@@Fischer927 ahh makes sense now lmao
How much for me to buy it 😂😂
I’ll give you 3500 cash
Ankle Bully sorry not selling this one!
Thats not a 110 its a 150 cc
It is a KLX110 with a 143cc big bore👍
$450...
Correct. I paid $450 for the bike. Thanks for watching!
I’ll never for the life of me understand how to spoke a wheel
Esta vi en chida yo quiero una jaja