Hello so these are trapezoid style speakers aligned like a “line array” speaker system. In actuality they are typical sound system speakers as would be found in any 80’s style sound system. The hi frequency horns are what really defines a line array for coverage and control of the sound
They are little more then boxes for holding the speakers. Which is fine....... As long as you don't throw on a label like "Top-notch stage sound system" It takes a lot more then that to be considered "Top Notch" line array speakers. That requires being paired and tuned to match the frequency range. Without that they are simply a stack of speakers.
Yes they do that some companies give you the specs sound specs which you can't give until the subwoofer and the amplifier are installed and you can get the readings but they give it anyway for the empty cabinet
Those boxes won't work as an array source because of the gaps between the HF guides. Doesn't worth it really. Also, I really doubt there were made any calculations during design so you should be lucky enough to hope that it reproduce on the out something compatible to the input.
Proud to here watching From Middle East Saudi Arabia Dammam City between Jubail City Express Highway Service Right Road Way OFW MIGRANTS WORKING ABROAD WORLD WIDE INTERNATIONAL UNIVERSE 11 MILLION Pilipinos....25 December 2020.....merry Christmas and happy New year
LOL! At 1:27 The picture gets very blurred right after he turned on the table saw. It spooked me for a sec. I thought something bad was about to happen.
Nice work and beautiful God bless ur hand work.pls sir can u teach me on line how to make it and the measurements I love ur work I wish I could build for my self
hola amigo , podrias mostrar las dimenciones de la caja por favor ?????? hello dear , could you show the measurements of the box please ????? greetings from Peru /////
Hope you don’t mind me chipping in because you probably won’t get an answer from the CZcamsr. I’m a woodworker and audio person who has been making speakers for 50 years. The answer to your question is not straight forward because it has more to do with other factors such as the enclosure design, the drivers used and the crossovers. They all influence the sound relatively speaking more so than the material used. Back in the day chipboard was commonly used because it was cheap and easy to work with but the cut ends required filling or a veneer. MDF is great but it’s extremely heavy. With P.A speakers 19mm (3/4”) in common because the timber is stable and doesn’t swell like chipboard or MDF if it happens to get wet. All three will work fine with a good enclose design and appropriate bracing etc where required. They are using some type of plywood because it’s best for that application. MDF would weigh a ton.
a ơi có đôi vỏ thùng loa a ray bat 30 nào cu không ki niệm vừa bán vừa cho e 1 đối đi nơi thật với là e Theo dõi kênh của a lâu lắm rồi nhưng không có tiền mua
Fantastic work. I wish if can have 4 of this here in South Africa
This guy needs his own CZcams channel and give this back to the real Mr. Electricity. His videos were much more entertaining.
Big like👍👍 beautiful array speaker system 👍👍💖💖
Pretty impressive! Thanks for sharing!
I miss the old videos of recoiling dead electric motors, soldering electric components, refurbished amplificator etc.
Beautyful acustic boxes.
Parabéns 👏👏👏👏 excelente trabalho 🇧🇷🇧🇷🇧🇷🇧🇷😎
olha nós aqui........... segue meu instagram @flvsom e ver as minhas caixas.
Great quality work keep it up and also make jbl and peavey 3 way speaker
Cool stuff. Very skilled woodworking.
Хочу такие домой, красота, Супер.
helper nya hemat biaya... bini sendiri.... good job brother🙏👍👍
cool, hand made speakers....good jobs.....I like it
Exelente trabajo los felicito
it's wonderful very good work
Parabéns qualidade..
Muito legal parabéns amigo
That cluttered wood shop would drive me crazy
Hello so these are trapezoid style speakers aligned like a “line array” speaker system.
In actuality they are typical sound system speakers as would be found in any 80’s style sound system.
The hi frequency horns are what really defines a line array for coverage and control of the sound
Genius!!!!!
They are little more then boxes for holding the speakers. Which is fine....... As long as you don't throw on a label like "Top-notch stage sound system" It takes a lot more then that to be considered "Top Notch" line array speakers. That requires being paired and tuned to match the frequency range. Without that they are simply a stack of speakers.
Yes they do that some companies give you the specs sound specs which you can't give until the subwoofer and the amplifier are installed and you can get the readings but they give it anyway for the empty cabinet
Excellent work.
Dimensions? Drivers? Thiele-Small parameters? Performance? Specifications? Build technique is superb, I’d like to try these myself.
Those boxes won't work as an array source because of the gaps between the HF guides. Doesn't worth it really. Also, I really doubt there were made any calculations during design so you should be lucky enough to hope that it reproduce on the out something compatible to the input.
Impresionante!!!
MALANG SUMAWE Hadir 👍
Gran trabajo 👌👏
Unas tremendas bellezas, muy lujosas y decorativas.
Proud to here watching From Middle East Saudi Arabia Dammam City between Jubail City Express Highway Service Right Road Way OFW MIGRANTS WORKING ABROAD WORLD WIDE INTERNATIONAL UNIVERSE 11 MILLION Pilipinos....25 December 2020.....merry Christmas and happy New year
I'm use
Ppl
LOL! At 1:27 The picture gets very blurred right after he turned on the table saw. It spooked me for a sec. I thought something bad was about to happen.
Looks like a speaker sweat shop.
Amazing the sound boxes
oh yeah, those slippers in the workplace 😎
Just one word comes to mind Impressed !!
Hi
Glad to see Mrs. Electricity gets stuck in too.
मुझे खरीदना है अपना मोबाइल नंबर भेजो
Nice work and beautiful God bless ur hand work.pls sir can u teach me on line how to make it and the measurements I love ur work I wish I could build for my self
Great stuff
Very nice!
Very nice program thanks
SALUDOS, DONDE PUEDO CONSEGUIR ESOS PLANOS...??? GRACIAS
beautiful arrau
Nice box
Sukses selalu dan tetap berkarya👍
Kren buatannya...👍👍
Perfeito!
Good job bro
Chất lượng quá
Nice work and where are you found and how can we get connected, I need those same speakers.
super 👌💗💗💗💗
Very interesting when making, goodjob
Greets from Poland
mis rrespetos broder
Good job Guys ;o)
Very information and interesting
💞Super 💞
Nice video where can i get the line array rigging to buy please.
I guess that is why Sonus Faber is very expensive because of the premium build quality.
I love these videos. I just wish they had some health and safety laws! Peace.
the best. mr
Love this design ❤️ can u share it 👍
I didn't know those speakers were of the driverless design!
Good design. Fair enough.
hàng việt nam chất lượng cao
Super 👍
Wow.. good👍
Eu não encontro esse guia de onda pra comprar aqui no Brasil!
Mamtap salam dari Indonesia
good job
Very good job especially the counts and the cuts. but the quality of the material is not good at all for this use due to the its mass.
After the paint roller, wat was there sprayed on to get the effect, basecoat or clear paint ?
Làm cho hai đôi California được ko
Trop cool
Saludos.. se ven perfecto... Que tipo de pintura usaron? Y dónde consigo la medida de la caja?.. porfis necesito información
Capaz que lo protean biene una pintura para pintar chsias de auto
Love From #TechnicalMrinmoy
Bác ở đâu em đặt cặp vỏ array bass 25
nice!
E muốn làm 3 đôi loa aray
can you make a klipsch lascala II
hola amigo , podrias mostrar las dimenciones de la caja por favor ?????? hello dear , could you show the measurements of the box please ????? greetings from Peru /////
На коленке, в сарае такие вещи делаете, молодцы, могёте...
Muito O trabalho, parabéns
Very good
Good new freand
Mantap boksnya
I have Cerwin Wega speakers made of chip board very silent and deep bass. I wonder if this hard board speakers will sound better??
Hope you don’t mind me chipping in because you probably won’t get an answer from the CZcamsr. I’m a woodworker and audio person who has been making speakers for 50 years. The answer to your question is not straight forward because it has more to do with other factors such as the enclosure design, the drivers used and the crossovers. They all influence the sound relatively speaking more so than the material used. Back in the day chipboard was commonly used because it was cheap and easy to work with but the cut ends required filling or a veneer. MDF is great but it’s extremely heavy. With P.A speakers 19mm (3/4”) in common because the timber is stable and doesn’t swell like chipboard or MDF if it happens to get wet. All three will work fine with a good enclose design and appropriate bracing etc where required. They are using some type of plywood because it’s best for that application. MDF would weigh a ton.
@@grahamserle7930 Wow! That's a tonne of knowledge. Now I do understand why. Thank you so much.
@@EddywaKenya You're very welcome, only too happy to share with others.
Hi guys!
Could you send me some speaker designs for me to make for myself?
Greetings from Croatia!!
Ps ....... Just keep going !!
Giờ này còn cầm máy cắt tu tấm nữa
Для сельской дискотеки сойдет.
Saludos, donde puedo conseguir esos planos
Gracias
A oi mình có lam thùng loa bán ko a
vỏ này cho sound tiếng sao anh thấy cái họng trelll không được như ý
Top notch twenty years ago...
a ơi có đôi vỏ thùng loa a ray bat 30 nào cu không ki niệm vừa bán vừa cho e 1 đối đi nơi thật với là e Theo dõi kênh của a lâu lắm rồi nhưng không có tiền mua
#MAnnttaaaapp!!..
#Amazing......KerreN**.
I love the guy with the stapler and the bedding! where are the speakers?
@Jackie Apreil they too poor to afford speakers were too poor to afford wood, lmao
@Jackie Apreil the world is full of criminals and perverts. protect yo kids from their ideas.
Cái này hầu như làm bằng thủ công nên khá vất vả nhiều xưởng lớn nó toàn lập trình trên máy tính song để máy tự cắt rồi công nhân chỉ việc lắp
Great Speaker Boxes... Just one thing... We forgot the speakers..
What is would like to see are performance characteristics. It is easy to build impressive housings, it is difficult to get performance....
Mantaaap bos
I'm in Ghana and I want to learn how to make line arrays speakers. Please any courses available online
Woh mantep sahabat salam bersahabatan amin
Any calculations for speakers? Or just imagined dimensions? Bad material for boxes.