Cytokinesis Tower in Grasshopper
Vložit
- čas přidán 12. 07. 2022
- final project file / 3dbeast
In this, video You will learn how you can create a Tower inspired by Cytokinesi Tower
Architect: Hayri Atak Architectural Design Studio
Plugin used: Weaverbirds, Chromodoris, Mesh Plus, Pufferfish
Other Tutorial
The Tower of Light in Grasshopper • The Tower of Light in...
Recreating Zaha Hadid Architects' Elastika In Rhino and Grasshopper • Recreating Zaha Hadid ...
Atyrau Bridge In Rhino and Grasshopper • Atyrau Bridge In Rhino...
Rhino SubD Facade Modeling |Naturalis Biodiversity Center Leiden • Rhino SubD Facade Mode...
Wuxi Xidong Park Bridge Rhinoceros3d - SubD Modeling: • Wuxi Xidong Park Bridg...
Modular hexagonal Garden: • Rhino-Grasshopper Tuto...
Emergent-Monstrous-Beijing-National-Hotel: • Rhino-Grasshopper Tuto...
The Sound That Light Makes Rhino + Grasshopper: • The Sound That Light M...
Parametric façade Torre De Especialidades : • Parametric façade Torr...
Tokyo Airspace Grasshopper: • Tokyo Airspace Grassho...
Chanel Mobile Art Pavilion by Zaha Hadid Architects: • Rhino Architecture Tut...
Origami Architecture: • Origami Architecture t...
#RhinoForArchitecture #grasshopper3d #SubD
very easy to follow as always.. superb tutorial.
This is a very impressive work, it should be given as a course.
Welcome back 3D beast. I missed your lessons so much.
Hey kummer, thanks! there will be more to come!
I will definitely try it as soon as possible! A friend recommended it to for sharing!
Awesome! Thank you!
Thank you very much. I wish your channel better and better！
Thank You Zhen, I hope so too
You're really a wild beast😎
Thanks for sharing. I learnt a lot of thing from your video.
Thank You!
This is SERIOUS advanced material. We need things like this because complex boundary closed curves are hard to figure out. This is a FUNDAMENTAL lesson.
Thank You Kummer, more tutorials are coming
@@3DBeast I managed to do this one without hick ups. It's a clean construction but it has HEAVY theory. You really do your homework with meshes, soft meshes, wireframes, mesh resolution, mesh subdivision and subD.
This heavy material for the parametric practitioner is needed with lots of urgency. This test data trees theory to some extend and the logic of offsets so curves gets closed on the boundary surfaces. Even with contour lines the thing fails.
It's serious material, really.
@@kummer45 Many thanks
thanks for the good tutorial
Thank you Ray
Amazing
You are
For me this is magic ..
fantastic
Thank you so much 😀
Hı, i like your videos, you are best to me
非常不错很喜欢
It's very beauty
welcome❤
Thank you
Thank you very much. My problem is with the floor flats. My separation plane overflows compared to the inner skin face. So I didn't make it to the end and I have 5 Bake instead of 7 Bakes. help me please 🙏
It's towards the end. 22:55 minutes
@3DBeast Many thanks for the great tutorial! Great as always!!
Just out of curiosity: how much could somebody with that skillset earn in the US and how long does it take to learn them? Thank you very much
Hi i really love your videos and i would like to ask if you could do something with grasshopper for fashion students? Like a dress on an avator or something
Thanks , I will consider ur suggestion
first I liked. then watch it.
Thanks!! You’re always welcome as well 😀
Excellent!! This is a great job!! A question: Where are I can find component MESH LOFT? I can not find in Food4Rhino... Tks!
its from "Chromodoris" plugin.-u can fined it in food4rhino
that's cool thank you!... what if we would match the triangular frame with the exterior facade quad frame, so that the vertex of the triangles always touch the border of the floors ?
u can by deconstructing the mesh and pull the naked vertices to the closet corners then re-create the mesh, and clean up in case some vertices overlap.
@@3DBeast I must try this thank you again, you remind me that I have to revise how data trees work in gh
I can't find the triremesh function, in the kangaroo 2 plugin it is no longer there, in which other Plug in can I find this function?
Finallyyyy
This is for you😉
@@3DBeast thx man. I really wanted to learn about the Curtainwall modeling for skyscraper. This video was very helpful for that!
have a problem after 19.41 with creating the boundaries. whatever I do I have tolerance issues. and there are minor differences with the curves. Could it be a tolerance issue on the rhino file?
really great tutorial btw!!!!
may be miss something when u following up, if u want refer the final script check link in the description
WHEN TO USE RELAY COMMAND PLEASE ? I'M NEW TO PARAMETRIC DESIGN , APPRECIATING YOUR REPLY
Amazing.. Can you please share the 3D file. Thanks
send me an email tridbeast@gmail.com
@3D Beast 13:38 I'm looking for Mesh Explode but I don't have it in my library... which plugin do I need to install? Amazingly detailed tutorial!!
Plugin used: Weaverbirds, Chromodoris, Mesh+, Pufferfish
if i cant install mesh + in mi pc, how could i fix that? or which parameters i can use for lograr the result of mesh loft?
@@jessicafuentes4227 use this script drive.google.com/uc?export=download&id=13VwGqmO4oDfXsXWNjO_pzYDwty6Z-k27
@@3DBeast omg thank uu
heyyy, im stuck in 9:00 while using mesh loft , i get a error " solution exception object reference not set by to an instance of an object "
how do i solve it
@3D Beast, can you please let me know how to activate the control axis for lines at 10:37?
Type Gumball and enter, then click turn on
or u can fined at the bottom of rhinotab
same thing if I start with ellipse my cull index is not taking removble both parts, its only taking 1 part of the removable curve, Do you have any solution of that? TIA
use "Area" component to find the center of each ellipse at time 0:51
If you follow through with that but still have the same issue, you might have missed something.
hey I just try to recreate this amazing tutorial, but I ran into some issues, at 21:12 your subd failed to split some curves (n = 3) so that you need to increase the offset values to fix the problem.. my issues are two of my curves (the very first {0,0,0,0,0} and the very last {0,0,23,0,0}) doesn't even do anything (n = 0). how do i fix this situation?
scale the sub-d from the center by using scale NU component /give z 1.01 (close to 1)
@@3DBeast thank you so much its working fine now
@@kafeinaishername8734 ur welcome
Can you tell us ..what are the plugins use here?...as I am not getting mesh loft and weavebirds picture frame in my grasshopper
I already mention that in the description, in case u miss it here list of plugins used Weaverbirds, Chromodoris, Mesh Plus, and Pufferfish
@@3DBeast I have installed Mesh + but I didn't get quad remesh and quad remesh settings in my grasshopper...
@@manushi5206 make sure ur using Rhino 7
Hi, I have a problem. I don't have 'mesh loft', what could I do?
from Chromodoris plugin.
This makes me wish I could use rhino.
hi! when i put shatter (like in minuteb 7:09) it appears error. Any clue what might happen?
what the error saying?
@3D Beast Hi I am facing a problem while using mesh loft at 9.00, it is giving me a surface joining all the curves but it is not dividing it vertically like yours and when I try to change the count in rebuild curve its not doing anything either. What do I do?
make sure ur using mesh loft from chromodoris plugin, and press ctrl+m to see the wire frames
@@3DBeast Hey I have one more doubt, so I tried making a similar tower using your way but in my data tree more than one locus differs, hence flip matrix is not working and I am unable to do loft or mesh loft...I tried using path mapper but its not giving me results either. What would you suggest I do?
im following your tutorial and this expression " if ((x0), x, abs(1-(abs(x)))) " wont work for me, can you help me figure this out?
it keep saying Syntax error: Unknown variable encountered: x
whoopsie, nevermind, i retype it character per character and now it works, if ((x0), x, abs(1-(abs (x))))
Good , if u have other problem let me know
@@3DBeast at 12:36, my quad remesh wont close, it has gaps even after i apply laplacian smoothing.. how do i fix the gap?
@@namirahdotpdf check the pipes if they do not intersect with the surface
Hi, please say me, what a plug-in for Quad Remesh?
u need rhino 7 to get quad Remesh
Looks like towers from Olympus on apex
Hi, the expression at minute 6:00 of the tutorial doesn't work for me, it says:
if((x0), x, abs(1-(abs(x))))
Variable x: Null
Syntax error: Unknown variable encountered: x
rename the input "Variable x" to only "X"
@@3DBeast Hahahaha so simple and I couldn't find the way, thank you very much, your content is incredible! Is there any possibility of a personalized course? Or is the Patreon subscription enough? I speak english a little bit. Im latinoamerican.
@@toscarriergeometra4603 I am glad that you found my content helpful. On Patreon, I offer tutorial videos based on members' requests, as well as an upcoming course on data structures in Grasshopper starting this week. As a member, you will have access to exclusive project files for each tutorial you see on CZcams. I also plan to use graphical representations and add subtitles to make my content more accessible to a wider audience.
@@toscarriergeometra4603 i have the same problem. How to rename?
@@krisztinak.-pednekar4975 Hello ... 6:00 min it says:
if((x0), x, abs(1-(abs(x))))
Variable x: Null
Syntax error: Unknown variable encountered: x
Rename "Variable x" to "Only x" It is the conflict programation. It is the problem and it is the solution.
How can I download the MESH LOFT component?
install Chromodoris plugin from food for rhino
Was doing alright untill Mesh Loft does not change anything here.. Why is that?
what you meant by "not change anything here"?
when i write the first expression its showing :error: Syntax error: Unknown variable encountered: x
even after renaming its showing error. 1. Parameter " x" has an invalid name. Only use alphanumeric characters and don't start with a number.
Trimesh is causing a error: One or more solutions possible. How to solve that?
I'm not sure exactly what you did, but maybe try adjusting the length factor.
Was this design inspired by Zaha Hadid’s Leeza Tower?
kind of similar but from Cytokinesis Tower by Hayri Atak Architectural Design Studio
What CAD program is this??
Rhinoceros-Grasshopper
At 6:18 my Pannel shows no negative numbers but many that are above 1. After using the expression the numbers in the pannel are still greater then 1. Does anyone one know why this is?
check ur target domains
@@3DBeast can I ask why the domain was set to 1-1.63?
@@mareepster5130 no specify value, You can experiment with it
@@3DBeast Do you know where to get the Mesh Loft and Exsplode Mesh command now, It seems that Chromodoris is missing those two commands from the plug in downloaded from Food for Rhino.
@@mareepster5130 use thes link
1 www.food4rhino.com/en/app/chromodoris
2 www.food4rhino.com/en/app/mesh
my brain hurts just from watching this viedo
😜
Cull index perfect selected the required part but it doesn't remove it , just selected how to solve this?
LOVE the results, but this video surely didn't help you get the apreciation you deserve.
The reason: i don't know much about modelling software,
BUT CAD Software (i mean DSS SolidWorks, DSS CATIA, PTC Creo Parametric, Siemens SolidEdge, Siemens NX, Autodesk Inventor, or even the free ones, like FreeCAD, Autodesk Fusion 360 or PTC OnShape* (you must share your design with the comunity))
are FAR WAY EASYIER to work with, and to understand.
Thank You. Rhino & Grasshopper are also easier.