Video není dostupné.
Omlouváme se.
Dewalt Rotary Hammer Drill Refreshment
Vložit
- čas přidán 24. 12. 2019
- I found this tool from Japan recycle shop in my City only 15$. It has a lot of dust inside. I am curious to the inside, so I decide to take it apart and clean it. In this video you will see how well Dewalt make this tool.
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------
No need to skip over the cleaning...I enjoy watching you clean. That is my favorite part of your videos along with adding the jelly grease. It always gives me a smile 😊
Okay, thank you for let me know 😊
These videos are always very good. I’m not going to nit pick every detail, it’s good to see someone take the time to repair/restore these tools.
Nice work! And Dewalt makes really well engineered stuff...
Yes, it is.
That spring at 10:05 really looks great! Thanks.
Yes, it is. Thank you!
Your videos are always making my day, thank you so much.
You're welcome, thank you!
Excellent job.
But you forgot to put the protective cable sleeve in place, right where the cable enters the grip. This is an important piece !! It protects the cable and may prevent a shortcut or malfunction.
At 16:27 you can see the sleeve. So open the grip and insert the sleeve.
Yes, thank you very much for let me know.
Whew! A lot of work. I need to refresh my tools! Nice job!
Thank you!
Congratulations, you are a mechanical master, you have all my respect.
Nice job !
Thank you!
Tengo un RotoMartillo igualito a éste modelo DeWalt SDS, pero el mío es marca Black&Decker que compré en el 2015, y me ha ayudado mucho en casa, con las paredes de concreto armado... Tomaré tu ejemplo para cuando me toque hacerle su mantenimiento!!!... Gracias Mi Amigo, se te saluda desde Venezuela!!!
¡De nada mi amigo!
Estoy muy feliz de que mi video pueda ayudarte. ¡Gracias por compartir!
Great job buddy. There’s always great satisfaction out of work like this 👍
Hi Gear Show 👋👋👋 good restoration hammer drill 👍👍👍🔥💣👌🏽
Hi Кошмар Кошмар 👋👋👋Thank you so much for away spent time with my video 🤝🤝🤝
Very good Strong Hand and Strong working
Great work
I have the same
I will start repair it tomorrow
Thing looked like it was filled with that Nickelodeon slime
I’m inspired by your videos
Bsr, bravo very very good job merci beaucoup monsieur technicien électricien pour vos vidéos continue,
Old but 100% better quality than new machines. Look Makita HR2630T after 3-5 years......
Merry Christmas. Good job.
Merry Christmas!
Thank you so much it is so great
You're welcome, thank you!
Amazing!! Great to see such attention to detail.
If you don't need it I will gladly take it
😂😂😂
Merry Christmas btw
Wow. Are you in the UK? Amazing job.
No, I'm not in the UK. Thank you!
You saved me a lot of money thank you
You're welcome, I'm that this video help you.
Oiga también vende refacciones para un rotomartillo como al que le está dando mantenimiento
Merry Christmas! All the best wishes and good health! Keep doing awesome videos!
Merry Christmas! Thank you so much!
A bueno todo sale fácil veo otras herramientas q se toman el tiempo para desarmar
This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool czcams.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.
Bravo.
Thank you!
I'll use this information to fix mine
your job very inspires me to do something
Very nice
Muchas gracias muy buen aporte técnico,
Gracias
Your tools like adoctor...it's funny ...nice to show your fixing and restoration...
Thank you!
إبداع ما شاء الله
دائماً مميز أستمر أخي
Perfek
Excellent
Eres el mejor reparador de taladro hermano mis respeto para ti 👏👏👏
Thank you!
What was all of that black stuff you washed off with wire brush on the housing?
Merry Christmas 🎁🎄 gear show!
Merry Christmas 🎁🎄
SonicVocaloidAstroBoyBen10Fan TheMightyPlayZ
"Drill doesn't work, I make a new one"
Tem alguma coisa do martelete HR 2631F ?
Muy buen vídeo amigo, una pregunta tengo el mismo taladro, pero al cambiar a rotomartillo pierde potencia y se barren los engranes me podrías ayudar con una solución
I did the engine side, but I can't fit the cover of the front. 😢
What was the cloth you put on it for?
Oyes amigo tu restauras equipos de estos tengo un rotomartillo parecido a ese q necesita restauracion soy de mexico
You are great
Çok güzel anlattin eline sağlık
How to change carbon
Поставлю лайк но остаётся вопрос где болт боек? В гильзе должно быть поршень ударный . Я шоке от такого разбора конечно.
Отлично!
It's the grease show 😂😉
Tob Job👍
Which grease used
What's the purpose of this white sheet of fabric that you glued to the gearbox?
Did you ever find out?
Aonde acho pecassa para essa furadera
Where can I get those springs for the coals?
Hi can you please tell me were I can buy parts for the same drill my hammer don't work but drill work fine cheers kind regards from UK.
How power ?
does it really need that much grease?
Cuantas veces la desarmaste
You are a genius 🙌
Who makes that nice gear puller set? Do you know if it is on Amazon or Banggood?
Sorry what product you use to clean with the water
Are you sure you put enough grease in it?
Hello, I have one like this and would like to repair it myself but i have some questions. Would you be open to answering them?
У меня такая же. Разобрал, смотрю ваш ролик, и о чудо. У меня есть одна лишняя деталь, которой у вас не видно, а именно пластина 7sm*2sm. Она насажена на вал переключения режимов работы, а у вас она просто отсутствует. Как такое может быть. Если я ее сниму может будет работать без нее? У меня проблема, клинит механизм. Помогите плиз. Аппарат классный.
Понял, у вас просто дрель, ударная дрель, и отсутствует режим перфоратора, это видно что у вас только два положения переключателя когда вы поворачивали ручку. У меня три положения. Странно, все остальное тоже самое. Из-за этой пластины наверное маркетинговый ход был) ударная дрель и перфоратор, но из-за копеечной пластины стоимость разная))))
What is the powder you add to the water? Soap? Degreaser?
احسنت عمل رائع جدا
Have you ever taken something apart and not been able to put it back together again.
I didn't see the piston and the drummer 🤔
It is inside the tube.
ty věci co opravuješ, taky prodáváš ??
Like!
I need to learn this machine models because my machine sticker remove
افسوس 😮
Why you remember all parts position? You're have manual or another methods.
The simple method is watching back the recorded video while forgetting.
I wonder if he ever has to look through some of his earlier footage like "where the fuck is this piece supposed to go?"
Your country name, very good work
У меня есть не рабочий перфоратор от Интерсеола, куда присылать на ремонт ?
В Японию. :D
Напиши ему на мыло и он скажет куда прислать.
Он из Вьетнама
What would you add in water (white powder)
It's bubbling. I'd assume it's just a simple washing powder.
Model number of the machine?
Carbon brush number please
👍👍😎☕🍩🔧🔨
Je moet serieus zijn...!
👍👍👍👍👍👍😱😱😱😱🤔🤔🤔
that would have lasted another 20 years way it was.
Mükemmel, mükemmel tebrikler.
I like you
Of course it's a great tool ... there is no such thing anymore.
Otherwise it’s Eugen Lutz or the good old ELU, later DeWalt
Can you provide me catlouge
Отличная работа, только вот смазки очень мало, и перфоратор долго не проживет
Basically tall of the crap from the US end up in Asia, and they end up in restoration videos used to display ads to sell more of those tools to the viewers and make a few buck to the content creator.
Imagine if those were sent back to the US for another round...
Judging by the text on the tool, this one was made by Dewalt for the Asian market.
Bro farklı şeyler olsun artık LÜTFEN 👏👏
🇵🇱👍 👏
🇪🇨👍🏻
koi number price
Dewalt Koyal number
Внезапно сырая резина (?) от Дженирал Электрик.
にほんじん
Bhai shab es ka armature chahiye mill gayega kya or mil jayega to apne contact number bhejo