thankyou!!! your neutral was what i wanted to learn, the other are the three phase wires then neutral! but you taped up the three neutral not to use them
Hello I have a question. I am trying to build this alternator but am having problems with the alternator.Here is what happened...when I took the rotor out,two contacts came up,I think they are called brushes.When I wanted to put the rotor back in,they blocked the process. I had to fix the brushes with a piece of tape to put it back in the old place.now I have a tape on the contacts and the generator does not work.how did you solve the problem?thanks for your answer
Hola buenas de donde compraste el controlador funciona con corriente Alterna o se necesita rectificar o se puede usar directo a una batería de 12 vols gracias
Parece que algumas pessoas estão confundindo "energia infinita" ou com gerador. O projeto é a conversão de um alternador para um motor BLDC! Parece bom projeto, tenho visto uns parecidos. Seria bom saber o torque.
Eso es falso no funciona en esas condiciones, cuando se aumenta el diámetro del rotor, este no puede acomodarse al relator más aún si se añade una capa de pegamento más no están claros los parámetros de velocidad y voltaje del generador
Non funziona, anche se metti i magneti resta un sincrono, per cui non parte spontaneamente, devi avviarlo con un motore di lancio o come un asincrono e poi devi stare attento all'angolo di carico , infatti se non ha l'angolo corretto perde il passo e si ferma o comunque non ruota in regolare. Se avesse un sensore per capire posizione rotore allora sarebbe un bld ovvero brushless. scusami la critica ma sarebbe tropo comodo altrimenti basterebbe alimentare lo statore con onda trifase e eccitare il rotore, ma non parte non ha un funzionamento corretto.
Finalmente un italiano 😀 Sarebbe interessante sapere la differenza di rendimento con il magnete originale oppure con quelli aggiuntivi. Eppoi si potrebbe fare una prova pazza: oltre i magnati aggiuntivi alimentare il rotore con l'apposita polarità, dovrebbe aumentare la coppia.
thankyou!!! your neutral was what i wanted to learn, the other are the three phase wires then neutral! but you taped up the three neutral not to use them
Good bro 😊
ขอบคุณมากครับ ที่ทำ clip ดีๆ เข้าใจง่าย และเป็นประโยชน์มากครับ
Good bro 😊
รอติดตาม วิธีการต่อ Hall Sensor อยู่นะครับผม ขอบคุณสำหรับคลิปดีๆครับ
Nice bro 😊
ขอบคุณแนวคิดดีๆๆครับ❤❤
Good bro 😊
Hi, thanks for your video, which version have more torque? With or without permanent magnet?
Good bro 😊
Thank you for a very interesting video. I am trying to make a PMA on my channel using neodymium magnets.
Good bro 😊
สุดยอดครับ
ขอบคุณมากครับ
Subscriber from Tamilnadu❤
. nice bro 😊
Super video. I like 💖 it
Nice bro 😊
Wow! Very cool idia thank u sir
Nice bro 😊
Nice video, thanks :)
عمل قمة الروعة فعلن تحية من العراق
Go😊
Hello I have a question. I am trying to build this alternator but am having problems with the alternator.Here is what happened...when I took the rotor out,two contacts came up,I think they are called brushes.When I wanted to put the rotor back in,they blocked the process. I had to fix the brushes with a piece of tape to put it back in the old place.now I have a tape on the contacts and the generator does not work.how did you solve the problem?thanks for your answer
Nice bro 😊
ทำคลิป ติด hall sensor รึยังครับ /รออยู่
Hello, very good video. If you put 36 Vdc to alternator it will go faster?
How many rpm?
?
Can you help me , because i have 36v battery 36v speed controller and alternator with magnets and I don't know if it works well ?
@@odysseaschrisikopoulos7162 36V. generate more heat. tested
How many volts did you supply to the brushless controller?
Good
เอามาดัดแปลงไส่โม่ปูนdiyได้มั้ยคับผสมครั้งละ1/2ลุกคับชอบแนวทางคับ
ได้ครับ แต่ควรจะมีทดรอบเยอะหน่อยครับ ถึงจะได้แรงบิด
Hola buenas de donde compraste el controlador funciona con corriente Alterna o se necesita rectificar o se puede usar directo a una batería de 12 vols gracias
So good,Thanks.
😊😊😊
Привет. Какой клей вы использовали?
ไดที่เอามาทำยังใช้ได้ปกติหรือพังแล้วครับ
วัดกำลังเอ้าพุต ทางกลให้ดูได้ไหมครับ ผมสนใจ อยากทำบ้าง
Good evening, how many amps does the dynamo output when it is running?
Good bro 😊
What is that circuit board where wires are connected?
نرجو الرد
I have delco 12si alternator how turn that to bldc motor?
It has no center tap wire
มอเตอร์ของผมมีสายอยู่ 4เส้น ต้องต่อแบบไหนครับ
แผงวงจรหาซื้อที่ไหนครับ
แล้วแปลงถ่านที่ติดมาละครับเราจะต่อใข้งานไหมครับ
หาซื้อแท่งแม่เหล็กได้ที่ไหนครับ
ส่งไดร์ชาร์จไปให้ทำให้ได้มั๊ยครับ
ลองเทสที่ 36V. ให้ดูหน่อยครับ
จะได้รอบมากกว่าเดิมไหม
มอเตอร์ร้อนมากครับ ผมว่าไม่น่าจะดี
ได้เช็คกระแส,แรงดัน,กำลัง, ไหมครับว่าได้เท่าไหร่
อยากได้บอร์ดควบคุมหาซื้อได้ที่ไหนครับ
Parece que algumas pessoas estão confundindo "energia infinita" ou com gerador. O projeto é a conversão de um alternador para um motor BLDC! Parece bom projeto, tenho visto uns parecidos. Seria bom saber o torque.
😊😊
Is the Alternator 12v or24v?
สอนติด hall หน่อยครับพี่
ผมเคยทำแล้วแม่เหล็กหลุดพังหมดเลย กาวสองตันเอาไม่อยู่ ใช้กาวอะไรยึดแม่เหล็กครับ
กาวซีเมนABร้าน20บาทครับ
Good 😊
ผมติดด้วยกาวตราช้างแน่นสนิทเลยครับ
ถ้าใช้สวิทชิ่ง 24 โวลท์ ต้องใช้สวิทชิ่งกี่แอมป์ครับ
good work
ใส่รถป๊อบชาลีไหวไหม
Imagina o campo magnético q esse negócio vai ter
احسنت عمل رائع
Super. 👍 👏
I like it
ลองทำตามได้ผลดีมากๆครับ
แม่เหล็กขนาดเท่าไหร่ครับ
Só faltou testar o torque, coloca uma correia pra tocar algo.
Super👍
can you give us the name of the glue that you used? thanks
Its most likely "JB Weld epoxy" is very strong for joining metals.
👍 👽
Where to buy old car alternator
ทำเป็นมอเตอร์ รถ มอไชไฟฟ้าได้ไหมครับ
ไชกับแผงโชลาเชลไดบอ
Power output Watt?
سوف اقوم بتجربة
Eso es falso no funciona en esas condiciones, cuando se aumenta el diámetro del rotor, este no puede acomodarse al relator más aún si se añade una capa de pegamento más no están claros los parámetros de velocidad y voltaje del generador
Boa noite felicidade paz por que não ficou ligado permanente era para ficar com imã sul com norte metade do sul com norte permanece infinita.
Running noisy, maybe bearing worn out?!
Acayip dönüş var
škoda že nerozumiem...polarite
i am not interested of the speed..the current output should be upon putting some magnet...okey
Berapa bikin kayak itu bos. Untuk motor listrik
Non funziona, anche se metti i magneti resta un sincrono, per cui non parte spontaneamente, devi avviarlo con un motore di lancio o come un asincrono e poi devi stare attento all'angolo di carico , infatti se non ha l'angolo corretto perde il passo e si ferma o comunque non ruota in regolare. Se avesse un sensore per capire posizione rotore allora sarebbe un bld ovvero brushless. scusami la critica ma sarebbe tropo comodo altrimenti basterebbe alimentare lo statore con onda trifase e eccitare il rotore, ma non parte non ha un funzionamento corretto.
Finalmente un italiano 😀
Sarebbe interessante sapere la differenza di rendimento con il magnete originale oppure con quelli aggiuntivi. Eppoi si potrebbe fare una prova pazza: oltre i magnati aggiuntivi alimentare il rotore con l'apposita polarità, dovrebbe aumentare la coppia.
I did the same as you. I got 29 volts and 0.3 Amps, which is too little to burn even the smallest 12 Volt bulb. That's why I don't believe you.
Halo apa nama rangkaian tersebut dan type natau seri berapa
Chào ngài ngài có thể cho tôi . Xem cách kết nối của rotos 3pha không.tôi chờ ngài
لماذا لا يوجد رد على الاستفسارات الخاصه بالمتابعين
Как я понял из любого генератора можно зделать????
Turbūt bus tęsinys kaip jį panaudoti praktikoje.
S/N
I like it sir .I need a magnetics 30 pices please collect and parcle send me sir please I am send by Amount please reply sir
Bundan çok güzel bileyim taşı olurmu
بس عني ﻤلاحظه دوران داينموا بماذا كيف دوان
얘 보다 머리 좋은 한국인들이 저거 안해보았겠나 성공했으면 유튜브에 도배했을거다 한국인이 실패했다면 한국인들의 영상이 없는거다
Daha çok mıknatıslı mi olur
Што такой буква s ю
Fuu report
Fake 100%
E.buona.idea.piu.aprfondita
نمبر.دیدو