1975 Johnson 25hp Outboard Motor Lake Test
Vložit
- čas přidán 14. 10. 2023
- This motor had been sitting for about 5 years after being purchased on a boat by the owner. It needed the water pump, and ignition serviced as well as the starter wiring redone. it's an awesome running motor again after the tune up.
Super sweet ol girl. She'll go forever ❤️. Best wishes to you and all your viewers from Brisbane Queensland Australia 🇦🇺 👍
This is a sweet motor. It was very well taken care of while it's previous owner had it. It's current owner should he getting it on the water for some fishing this year. It was a pleasure to run this one. Thanks for watching!
That's all a man needs right there. Great motor. Thanks for the video.
Agreed. This is a great motor. I really enjoyed running it even of it was only for a short time. Thanks for watching!
Small boat, small motor, large life
Nice, that sounds like a brand spanking new motor.
Crisp idle of an old 2-stroke makes me feel fuzzy inside
It runs like a brand new motor too. This is a very strong and smooth 22c.i. 25hp OMC. It runs as perfectly as one could ask for and it still has the low-tension magneto. Everything has almost no wear on it so it still runs great with that ignition. Thanks for watching!
Every time I see one of these old Johnson's, I can't help but think of my Dad. He worked at the Waukegan plant for 33 years until he retired in 86.
That's excellent! Glad to be able to bring those memories back. Thanks for watching!
So many other companies stole copied OMC now sadly gone.
I grew up working on these in salt water marine mechanic long island new York.
They still are running being used!
A few 70 HP and V4 115 never died.
Sweet running 25 horse! Smooth as can be for a 1975 vintage Johnson! That’s definitely a nice one Ben! Go get warmed up after you get them back! Appreciate you sharing these with us! Mark in Iowa.
This is a beautiful running 25 horse. Very strong and smooth. It wasn't too awful out there on the lake. It made it up to about 50°F. The wind was kind of a pain, but I've been out in a lot worse. Thanks for watching, Mark!
Thank you for the 39 rides this year (I think my count is correct, lol).
It'll be a pleasure to see you back next year.
Thank you and thanks for watching! I'll get out again if I get a chance, but it isn't very likely this year. With any luck I'll at least get in some test tank videos done over the off season.
Oh yeah that’s a nice one. I look forward to what you come up with next year! Thanks
It is a really nice one. Looks and runs great. Hopefully I will get some.of.the projects I hoped to.get finished for this year ready for next year. Thanks for watching!
so glad I was able to see that on my B-day Thank you
I'm glad you were as well. Thanks for watching and happy birthday!
Nice runner. I would have kept my old Johnson had I found someone honest to work on it. Good job and thanks for sharing.
Thank you! This one was very well maintained and had just been sitting for several years. It was a pleasure to work on this one compared to many of the junkers I find that I rehabilitate for myself. Finding honest people to work on these things is not easy anymore. There are not a lot of shops around anymore that are willing to touch them because it is so easy to get more into the motor than what the finished product is worth. That and many new techs aren't trained or familiar with the older technology these motors use. Thanks for watching!
Nice set up ! 😊 it cranks !
Thank you! This boat scoots nicely with a 25. This is a sweet running 25. I think the owner will be pleased with it. Thanks for watching!
I am doing electric start conversion on a 76 evinrude 35hp, had a har time locating a points electric start flywheel, I took starter off a 81 with cd ignition didn't realize keyway 8n different position till I didn't have spark...lol, great video my friend
I would have guessed those flywheels in the electric start configuration would have been easier to find. Nice project and a good motor to have electric start on. Thanks for watching!
@@oldjohnnyrude8404according to richards tools its a one year only?
@@vtwinaddicted5852 Yes, it is. In 1975, there was no 35hp made and in 1977, the ignition system changed to solid state from battery fired electronic ignition. The would make it a bit more difficult to find, but ifmd have thought the '76 electric start flywheels would be more plentiful than the rope start ones.
Man. I can smell the 2-stroke from here, that's why I don't care for my new 15hp 4-stroke, no smell !
Yeah, for those of us that are accustomed to the 2-stroke smell and associate it with boating, fishing, and good times the 4-strokes definitely do lack something. I love the 2-strokes for their power to weight ratio and their simplicity too. Thanks for watching!
Very nice! Thank you for sharing!
Thank you and thanks for watching!
Maybe not a collectable motor as such but that would be a great one to add to a collection given the condition! Thanks for the video!!
I really like these motors and this one is a beauty. It will be going back to its owner before long. I will request that he take great care of it. Maybe someday I'll get the chance to add it to my collection. Thanks for watching, David!
@@oldjohnnyrude8404 Might suggest your name and contact number on a piece of tape stuck to the inside of the hood so the owner doesn't forget!! LOL
26 mph.. very smooth engine..
I got very close to 27 mph a couple time with this motor. It's a great runner. It's one I would like to.add to my collection. Thanks for watching!
I bought a 1984 Johnson 25 last summer which runs great. Where did you find the kill switch with the lanyard? I’d like to put the same thing on my motor.
You got a nice motor. The '84 25hp is a 31c.i powerhead 25hp which is a detuned version of the 35hp of the same year. I bought the Seachoice brand lanyard kill switch. I got mine on Amazon but they are available at many places that sell Seachoice brand marine products. I have used other no name kill switches before as well, but I find these to be of better quality and still at a good price point. Thanks for watching!
Best ...I had so many in salt water use still running.
Grew up with these Johnson Evinrude OMC .
So sad they are gone now.
Yamaha Suzuki took over.
I agree, it is sad that these motors are no longer being made. BRP gave up on them, but at least BRP was able to continue to give life to them for quite a while past when their initial bankruptcy. Lots of them were made so lots are still around and viable motors to this day at the hands of a capable mechanic. Yamaha used a great many designs from OMC in their designs and I belive that helped make them the excellent motors they are today. Thanks for watching!
Nice job👍
I have a 1989 25 HP Evinrude I got from the original owner. My boat is a Lund S14. Pretty wide,deep & heavy I’m amazed at how well the 25 pushers it along. I’m assuming it’s the stock prop on it
Thank you. The 89 Evinrude 25hp is a 31c.i. powerhead and those are really strong running 25s. They'll scoot! Thanks for watching!
@@oldjohnnyrude8404
If interested I can forward you a picture
Somo Lake 10 miles west of Tomahawk
We try to go up there a couple times of year
What prop do you got on there because I have a yammaha 25hp 1980 an I wonder if it will go faster with a brand new prop on but I haven't ridden with it yet
I was running a Michigan Wheel PJ18 9.25x11P 3-blade aluminum propeller on this motor for this run. This 25hp is a 22c.i powerhead. I'm not sure what the displacement of the 1980 Yamaha is, but I'd assume it is closer to 30c.i. which will likely be able to effectively run a higher pitch. My 1986 Mercury 25hp came stock with a 13P prop. The 1969-1976 OMC 25s are hot rodded 22c.i motors that started out at 18hp. The later ones share the same displacement as the 35 hp and are detuned to 25. There is a definite difference between them. Thanks for watching!
@oldjohnnyrude8404 thanks I appreciate it
@@Fishing_B_and_B You're welcome!
@oldjohnnyrude8404 one last question please how long is your boat
What RPM should they run at wide open?
These should run at around 5500-6000 RPM wide open. They run about 1000rpm faster than the 18hp 22c.i. motors. Thanks for watching!
Hay there love the video so I have a bunch of 75 johnson 15hp also got a 18hp parts motor I'm about to give it a away. Let me know thanks 👍
Hey brother really like your channel
You've mentioned a few times you were testing a customers motor so I take it you do work on other folks motors and not just your own?!😇
I am thinking you are not too far from point place here at the state line if n you do take on outside work how would I contact you?😇
Thank you. Yes, I do occasionally work on motors for other people. I'm an hour or so from Point Place. You can email me at bbreitner at hotmail dot com. We'll see if we can work something out. Thanks for watching!
Hey Jonny rude, I've got a question, rebuilding a 6 HP Evinrude magneto,new wires, Sierra points,cond,new OEM coils,but have no spark,I'm stumped, rebuilt 5-6 omc mag plates with no issues,not sure what the issue could be
Are your new wires well-seated in the coils? Are your plug terminals seated through the copper core? Are the terminals clean? Did you clean the points before you installed them? Are your coil wires going to the correct ser of points and the correct condenser? Is your points cam on upside right? Is the flywheel key in place and in good condition? Is the keyway in the flywheel in good shape? Are the points set properly? How were they set? Timing tool or feeler gauge? I'll start there. Maybe this will help. Thanks for watching!
Hey thanks for the advice I finally figured out what was wrong with it, I had the coil wires going to the wrong set of points they were crossed switch them and I've got fire now like it should be not sure how I managed to do that
@@jimm1975 Excellent! Glad you got it figured out. I have seen that happen before even by folks who are fairly familiar with the OMC magnetos. As long as you got it corrected, all is well. 👍👍
@@oldjohnnyrude8404 an amateur mistake on my behalf I've only done about four or five magnetos and various other repairs, through your videos and other CZcamsrs that work on outboards, looking fwd to some new content from you, Thanks
@@jimm1975 You're welcome. I'll be glad when I get a chance to make some more videos and get back on the water. Life is busy right now and I have had very little opportunity for motor work this winter. Plenty of runners to get out and make some videos, but not a lot of new stuff to run yet. Thanks again for watching!
Do you have an email that i can contact to ask some tips and tricks about pulling a 40hp stuck drive shaft?
I have done a few different things. I have used a vice grip pliers with a slide hammer attached if they're not horribly stuck that works. Just grip the drive shaft somewhere there is not a seal running on that surface. Hitting the end of the drive shaft with an air hammer will usually break the bond and allow it to be pulled out. There is another method too but it requires making some special tools. If you do want to contact, bbreitner at hotmail dot com.
@@oldjohnnyrude8404 thanks!!!
@@vtwinaddicted5852 You're welcome!
No need to replace this engine, it is a beautiful low hour 25hp for sure. Yeah, the low tension ignition is not great, but at least this engine still uses the conventional brass ring/mag plate set up. The other engines with the dam delrin plastic bushing tend to wear the bushing and crankcase pilot boss. This is a great engine, just not ideal for extended trolling... She's a beauty, spins that 11" prop nicely.
I agree 100%. This is a beautiful motor and it runs perfectly. These are not ideal.for trolling, but they're excellent engines. I don't use my 25s for trolling anyway. It doesn't suit the current owner's wants quite as well as it could, but I believe he'll be happy with it. If he gets a replacement, I have first dibs on this one and I'd be grateful to own it. Thanks for watching!
@@oldjohnnyrude8404 What needs does the owner have that this engine does not fulfill? Trolling? No alternator? Power tilt?
@@donk499 Trolling and quiet mostly. Although I don't fond these motors that noisy he would use an electric if they weren't 3x the cost of an EFI 4-stroke for comparable power. On a gas engine, he would find the alternator a bonus to allow running electric accessories. All these things I understand, but I really like these motors.
@@oldjohnnyrude8404 I do too buddy
360 or 521cc...??
This is the 22c.i. (360cc) powerhead. 1975 is the second to last year of this displacement powerhead in a 25hp. Thanks for watching!
I have 1974 25hp Evinrude I went through 6 weeks or so a go........ nothing like old 2 stroke
Nice! I have a '69 Evinrude 25 that I'm working on a '76 powerhead for. I hope to get that one up and running for next season. Definitely nothing like an old 2-stroke. Thanks for watching!
@oldjohnnyrude8404 I don't miss none of your videos thank you sir