Rusty old cleaver - Perfect restoration I Dr. Hut of Handcraft
Vložit
- čas přidán 10. 06. 2022
- #cleaver #restoration #hutofhandcraft
@Mister Patina : / @misterpatina
Second Channel: / @drhutslab
Patreon: / drhutofhandcraft
Instagram: / dr.hutofhandcraft
Facebook: / hutofhandcraft
Welcome to another restoration! Today: An old cleaver.
You will see a lot of lathe turning, sanding, woodworking, filing, grinding and sandblasting in this video.
If you are willing to support me leave a comment, subscribe and share my work, I really appreciate and it helps me a lot!
I hope you will have some fun watching the video! If you have any further questions on tools, the process or the science behind etching with salty water leave a comment (a video about that will come on my upcoming second channel soon).
Disclaimer:
The experiments are only for educational purposes and serve as entertainment.
I am experienced in handling the used substances and I advise everyone who is not a trained professional not to imitate the experiments I show you.
For experiments which could cause potential danger I will not tell you which chemicals I am using to prevent imitating. Those who know what is happening, know the chemicals anyway and probably are trained professionals. :)
I am not responsible for personal injury or property damage if the experiments will be imitated.
I hope you understand.
Until next time :)
#cleaver #restoration #hutofhandcraft
Instagram: / dr.hutofhandcraft
Rusty old cleaver - Perfect restoration I Dr. Hut of Handcraft - Zábava
Love the new look. You did a
Fantastic job of cleaning and redoing the Handel. Now it actually looks berrer than the brand new. I. Really love this Thank You for Sharing your passìon/craft with us. I truly appreciate this.
Thank you so much for your kind words!
Awsome !!!!
Thank you!
You make Mr Patina proud with the quality of your finishes.
I hope so 😄
Bravo my good sir, bravo.
Thanks mate 🙏🏼
A work of art from scrap Sir. You must be very pleased with it. I prefer to use Teak oil for wood. I use it on boots as well, great for waterproofing.
Thank you! I will try that out!
Oh I didn't realise fur were watching as well. Guessing no other vegetables were harmed in the making of this video 😊👍 subscribed
😄 Thank you for your support!
Impressive ❤😊
Thank you!
Well done 👍
Thank you 🙏🏼
Great job on the rivets.
Thank you! 🙏🏼
Great work!
Thank you! 🙏🏼
Good work!!!!
Thank you!
Nice job, sir.
Thank you very much 🙏🏼
Really nice work - best cleaver restoration I’ve seen. I love that you removed the pitting. Thank you!!
Thank you so much 🙏🏼
Nicely done
Thank you!
Nice Work :)!
🙏🏼
That was better restored than it was originally made. Imo. ❤️❤️❤️
Thank you so much 🙏🏼
Making those individual rivets is just amazing. I think this is the reason why people like your handcraft, because it is really individual.
Thank you so much!
I learn something new evert time on this site. 👍
Sehr geiles Ergebnis.
Die Pins sind das beste
Ich danke dir mein Freund 😘
Just perfect. Especially the brass-rivets ! Thx for showing !
Thanks so much! 🙏🏼
❤️❤️❤️❤️
🙏🏼🙏🏼🙏🏼🙏🏼
What a pretty Cleaver! Wonderful job mate! 👏🏼👏🏼
Thank you mate, much appreciated! 🙏🏼
Very nice finish.
Thanks mate ✌🏻
💚💚💚
❤️❤️❤️
I've been watching your videos in order and noticed you have used a sandblaster a few times now. Do you now own one, or are you still using Mr Patina's sand blaster? This restoration is definitely one of your better ones - your technique and outcomes are improving. Etching the characters on the metal worked particularly well.
Hey, thank you for your comment, I am alway trying my best to improve my work!
I have my own sandblaster for a couple of months now, must be since march or april this year.
Thanks again!
Amazing work!! Mega gut!! Mach weiter so! Nächster Meilenstein 10k subscriber!!
Ich danke dir 🙏🏼
YO! All that it needed was a good cleaning! 🤣
Looks great. Good job. 👌😍
😄😄 thank you! 🙏🏼
beautiful! wonderful So happy to have watched this
Thanks Nora! 🙏🏼
A work of art. I enjoyed this.
Thank you for your support, it’s much appreciated! 🙏🏼
❤❤❤❤❤❤
🙏🏼🙏🏼🙏🏼🙏🏼
Great restoration it looks wonderful!!
Enjoyed your video and I gave it a Thumbs Up
Thank you very much ✌🏻
@@DrHutOfHandcraft You're very welcome!!
Thank you for sharing this fantastic work
Thank you for your kind words 🙏🏼
Great restoration
Thank you!
Amazing work
Thank you, very much appreciated 🙏🏼
Danke!
😄🙏🏼
Perfeito muito bom gostei !
🙂🙏🏼
Excellent, love it.
Thank you 🙏🏼
Great job!! I love it!!
Thank you! 🙏🏼
Nice one
Thank you 🙏🏼
Amazing work, dude! Really beautiful piece! 😃
Stay safe there with your family! 🖖😊
Thank you very much mate 🙏🏼 Stay safe ✌🏻
Excelente trabalho.👏👏🇧🇷
🙏🏼🙏🏼
Exzellente Arbeit👌
Ich danke dir 🙏🏼
This was excellent work, I'm always so pleased to be a subscriber of yours!
Thank you for your support, much appreciated! 🙏🏼
As always amazing work, in the future since you like cool experiments, you can try inducing fake rust via hydrogen peroxide with salt and vinegar solution(warmed up and dryed with air dryer to mske it fast since you would need to spray it maybe 4-5 times) and then covering it with protective layer it looks really good but on axes and so for the cleaver you can try leaving the blade dipped in FE3 or I believe iron chloride maybe it should give the same effect even though it would need to be repeated few times and then treating it with any coffee based liquid (best in my opinion is just a regular instant coffee liquid) over the course of a day maybe it would give it a very nice darkish glow like bluing but a very shinny one.
Thank you for that, I will try it out!
Incredible job 👍 that blade turned out so well. Loved the lathe work, that was great. What sort of lathe do you have ? Finished project looks stunning, well done 👏👏👏
Thanks mate!
It’s only a small lathe, Paulimot Sieg C2. A bigger lathe wouldn’t fit in my shop 😅
@@DrHutOfHandcraft wait now I'm confused because I found you on Instagram and spotted your lathe 👍
@@Austeration what confuses you? 😄
@@DrHutOfHandcraft it's ok lol I woke up thinking I was messaging someone else.
@@Austeration 😂
If you don't have a sand blaster whats the best/most common way to remove rust
Depends on the part. I would say the cheapest and easiest way is probably 25% acetic acid (vinegar essence), but that takes a couple of hours. And if you have access to a machine with a wire brush that works also very well.
Ok I do have a wire wheel I can use but I don't have the sand blaster or the electric deal you have
@@dust09100 That’s enough, you don’t necessarily need a sandblasting setup 🙂
Crunchy
😄
@@DrHutOfHandcraft I love it!
So do you add the rust beforehand with a process or do you find these items rusted? I've recently learned that over 90% of restoration videos are fake so I figured I would ask.
I don’t know where you “learned” this, but no, I don’t add rust beforehand. I found this piece at a metal waste/recycling facility, where I find a lot of my projects
I wish he had the actual sharpness tester
Next time 🙂
Nice video, what grit did you go up to with the sharpening?
💚💚💚
Thank you. Sharpened up to grit 1200
the rust literally looks like cheeto dust lol
😂
handle not glued!
Well observed 😄 Glue is unnecessary for this handle type, especially when using such rivets
Love the new look. You did a
Fantastic job of cleaning and redoing the Handel. Now it actually looks berrer than the brand new. I. Really love this Thank You for Sharing your passìon/craft with us. I truly appreciate this.