TIME TO START THE BOOSTED K20!
Vložit
- čas přidán 25. 08. 2024
- Today we did TONS of upgrades to the K20 EK civic, WE built a downpipe (Sort of), we got the Hondata Kpro installed, and tons of KTuned goodies on the car! Its almost time to start it up!
K-Tuned: k-tuned.3dcart...
Yonaka: www.yonaka.com
Track1: trackoneengine...
Garage 16: www.garage16.ca
THE COMMITTED CREW:
www.TheCommitt...
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2
CURRENT GEAR:
Main Camera amzn.to/2LkGk8V
Vlog Camera amzn.to/2IBewdA
Lens amzn.to/2Ll1Ev6
Mic amzn.to/2P8hCIw
Best Camera Bag amzn.to/2Pd5Yfg
Tri-pod amzn.to/2NmsCQH
Gorilla Pod amzn.to/2CqBh3J
I love the real talks that robbie puts at the end of his videos. Like hes one of the few youtubers out there that really wants to put out a good message, and hopfully inspire people do to the best they can, and live the life they want.
I agree. Big Robbie seems like one of the most genuine youtubers out here. That’s why I dig his content!
Damn that jacket is the most quality ive seen in some merch sheesh
Why don’t you install a winch in the garage infront of the lift so you can just winch it in?
My exact thoughts lol
This
This is a great idea it would be cheaper than leveling the ground/re concrete the ramp
I would buy a cheap trailer hitch and weld it to a plate, then anchor the plate to the floor with concrete bolts. That way the winch could be mounted to a hitch mount and removed and used on any hitch or stored.
Robbie could then use the sane setup on his trailer and truck for pulling vehicles and atvs on.
robbie makes me want to make every build of mine clean with what I have.
Robby wants me to buy everything on ebay😖
I don’t know about anyone else, but I’d love to see some of your random DIY and house projects🤷♂️
agreed
I'd straight up watch anything Robbie would post
Everything you do is just so cleaaaaan
I only signed back into CZcams to watch this! Another great upload! Respect from UK
"When I'm driving and it decides to be a d**k" has to be one of the funniest quotes Robbie ever said.
waiting for the 300ZX reveal 😏
Same!!!
@@waleedmushasha3574 he thought he was slick 🙄 like we not obsessed with cars
Ik I’m so jealous
Z32 300zx boi
@@duxswag so true lmao
Oh boy! I can't wait for the new "I'm an idiot" episode with my favorite idiot!
We love you man
We’re here for you brother, you got this!
Robbie, mount an electric winch to the floor in front of each of your bays. Then all you need to do is line up a car and winch them straight in. Love all the builds keep up the good work! You are an inspiration!
Robbie do what me and my dad did. Bolt a winch to the floor in the back of the garage that way you can tow in dead or non running cars!
Slammed that notification awesome to see the process on the civic civics will always have a place in my heart cant wait to see jasmine 3.0 hopefully coming later this year also the more effort you put in grinding through winter the more driving you can do come summer, stay commited itll be worth it
First started watching when they boosted that red 240. And ever since then-now I just have so much respect. So Humble honest skilled and passionate.
I hate that ONE person who disliked this video
It’s 7 now 🥲
i am sorry
16 now why you watch it if you don like it man wtf?
@@dusandobranic2746 IKR
23:(
That advice at the end is something that I needed to hear, Thanks man
Robbie being slick with that secret mission on his insta story, looks like he was towing a 300z in white or silver?
Robbie, I get so happy every time i see you upload a new video, I always prioritize your videos when they are popping up in my flow. Seing you do your homebuilds makes me wanna do the same, I ASUME your not an educated mechanic based on your content with homemade pipes and other solutions than manufacturing, it makes me wanna be like that in the future, but besides your civics etc I wanna build V70R:s and Rx7 FD3S, M3/M4/M5 and gtr:s. Loves to see upcoming videos!
Hey robbie you should put a hook behind the car lift.
Just a hook that you can remove if you dont need it.
It would make moving cars inside the shop a lot easier if you cant start the car.
Yeah I know that feeling. The first vehicle I built I built before I had my license. I made a 550hp c10 that I legitimately could not drive until 6 months after I finished it. And even then I just had my permit, so my mom had to be with me, she hated it. Too loud, too fast, Yada Yada. So I never got to see what it was made of, but it did force me to break it in properly. Those 6 months were hell. Little 15 year old me spent all of his time and money building an engine and putting it in his truck, just to suffer.
The vibes in this video are awesome. Keep it up Robbie!
Picked up an EK hatch 2 days ago because of this series! Keep it up Robbie you’re a huge inspiration
I like the progress on the ek! I'm starting my 3rd ek hatch build and documenting the mods on CZcams. Watching your videos inspired me to start my own channel.
I needed to hear what you said at the end of the video. Great quality stuff dude. Don’t ever change
A Quick tip if I may about the video quality. You should look into the premiere pro plugin "flicker free", to remove that banding you see when you speed the video up for the time lapses. It's amazing at removing the flicker and banding, but it's not cheap. It has saved me on multiple occasions when I haven't gotten my camera settings quite right, or have multiple light sources and you can't match it quite right. Thanks for the great videos as always and always look forward to your next one!
I wish my 07 si had this much engine bay space, but this build is giving me ideas for building my k20.
This was definitely one of my favourite vids. Very beginning to the end🔥
You should paint the rad fan shroud black, it will look super stealth and blend with the engine bay so only the rad will be visible. Check AdamLZ R34 shroud it looks so good.
Dude I know the feeling, I finally got my civic running and it's the best thing that's ever happened
I recommend putting a winch thats bolted to the floor on each bay because it can help putting non running cars in the garage
Why lie bro a dog is like having a kid lol post bangers when you can bro 🤘🏼
Respect for ditching Instagram to recuperate, been doing it myself for the past few weeks although haven't pulled the trigger on actually deleting the app and disabling my account 😬. Can't wait to cop a windbreaker and rep it :)
sooo keen to see it started honestly haha been a long time coming! take your time though man, we are all here for you, look after yourself :)
That downpipe is stainless you want to use a wire called 304L and you want to use a tri-mix gas that has helium and you can use stainless 304L and the tri mix to weld regular carbon steel also
The AN lines were a nice touch!!
This build is turning out way better than I thought. Keep them coming 👊
Bolt a winch to the floor under the desk in front of the lift and then whenever you have a dead car u can connect it to the winch
If something is off or wrong...step back and reset...can't rush protection, it takes time to build cars to the vision you have for your build.
Get a small winch that you can bolt into the floor so you can pull non running projects into the garage.
You should install a tow winch at the end of your garage so when the cars are close enough you can easily pull it in!
Can you put like a small electronic wench next to the wall behind the lift so when you’re bringing cars into the shop you can put them on the wench and it will pull the cars over that small concrete ramp
Glad you're looking after yourself. Keep up the great work 👍
That wind breaker is dope keep up the great content 🤙 we understand the frustration your good 🙏💯
Dont know if youll see this but make brackets for your intercooler pipes to hold them in place. Those cheap “universal” kits pipes flex a ton when you hit boost and can pop couplers off. Mad that mistake on my car.
that garage16 shoutout thooo #1 spot imo
Concrete lag bolts and a winch under the work bench in front of the lift!
I know the feeling. Took me 4 years to finish my build and finally drive it.. But it’s the greatest feeling in the world to finally do it. Woulda finished it much faster had I had the money and time and not so much poor me my car is still not done moments lol
Mount a winch to somewhere around the workbench so you can winch cars in straight to the lift.
So excited
Robbie paint the top bracket on the radiator black so just the rad is silver
ROBBIE i was so excited to see this video pop up in my feed bro ! good things to say about you, been following you since before you bagged your brz, what a long way youve gone !! keep it up
You should put a strong winch anchored to the floor. Then you only have to clip and use it to pull in. Only a few 100$ for anew one.
Yes
An idea for pulling a non running car into the garage, maybe mount a winch to the floor or something and have it set up so you can use it to pull it in
Robbie if you are gonna do some awesome exhaust you need to buy some stainless wire for the welder and some argon gas or full send it and get a simple tig welder
Love the wind breaker and hoodie
you need to get some cheap winches and mount them to your floor in the front of the garage. Make life easier when moving rollers around. Just hook them up and drag them in
This is the best automotive youtuber no cap
Good talk at the end of the vid really relatable, love the civic broo🤙🏼
These vids are getting too HYPE!!! So excited for you Robbie!
Can’t wait for the EK to start
Ive been waiting for this!!!
Had a shop and me and my brother mounted a tow winch to the floor so we could move cars in by our self
I can not wait to see this car run oml
Robbie makes my day
You could attach a winch to the back of your garage so u can pull cars in with it
Woo so excited! Much love from Alberta Robbie
ROBBIE SAVED THE DAY
I think you should make vlogs like not only car videos but make videos of your day and doing things in the house and going out with friends
Robbie don’t feel the need to apologize if you’re gone for a sec, you have a life we get that. Just bust those videos out when they’re to your standard of quality.
17:52 ah my cars not that cool 😒 that's how I feel when I see you working on the ek and my ek is still in storage 🤣. I genuinely apericate the way you took a minute to explain the things you go through robbie , I know managing everything you do is tricky but you'll get the hang of it bro , stay committed!
Great advice man
Yes that is stainless. If you aren't sure, you can put a magnet on it. Steel will stick, stainless will not. Also, you want your welder to sound like crackling eggs.
Can’t wait to see what happens with the civic
s chassis secret mission babyyyyyy
Yeah
Don’t know if you know this but you actually can flip that brake booster so the nipple is underneath the master cylinder for a cleaner look🤔
YES FINALLY
Hey Robbie the flange may have warped with all the welding you did. You need to lap it with sand paper 👍
You need to set up a winch system in front of the lift so you can winch un start able cars
u should put the buddy club seats in the ek civic... thats if u still have them
Put a winch under the bench to pull cars in and out with
Probably already been said but stainless steel isn't magnetic. Mild steel is. Easiest way to tell👍🏼 love the vids and can't wait to see the new project ;)
that first weld you did the wire speed was too slow, the welding you did around the flange was good but it needed more amperage. the fact you did a practice bead is a good habit to get into. you are getting better. good welding sounds like sizzling bacon, as weird as it might sound listen out for the sizzling bacon sound and you'll be on the right setting
Robbie get a winch and bolt it to the wall and use that to pull cars into your shop
You should install a winch under the work bench
Robby you shud mount winch undet your worktabel (to wall) when you need to pull cars just hook winch to your project and pull it in
maybe you could put a winch under the workbench, so you can pull your cars directly in
The most wholesome person on CZcams
Just get a harbor freight electric winch , bolt it to the floor under the bench and use it to bring in your cars
Robbie, snag a winch for dragging units in!
Feels like it took for ever
Excited to see this thing compared to your other builds
Don't know how I found you. But been watching since day one of the Civic build 🤟
That jacket looks like the illiminate one I bought, ngl Robbie's one is super clean tho
No winch needed ....next time hook the strap to the floor just like you had it..... except put a pin thru it so it can't come off... An raise your car lift arm so it picks up on strap ....instead of racheting .....or raise the arm all the way throw strap over the top of car lift....hook to bumper an lower the arm may not pull it for you this way but at least would make it alot easier to push lol
Clean build dude
Robbie get a 12ton winch from Harbor Freight and then you can winch the Cars inside. I think you are awesome Robbie love your Animated personality. 🤣
Stay committed
We need the committed crew hat to make a come back