Super joli mon ami ton 700 Superjet à tout hasard j'ai une question tu sais comment se réamorcer le circuit de carburant sur ce type de jet car j'ai le même mais j'arrive pas à réamorcer le carburant jusqu'au carburateur si tu as une info merci
Hey thanks! As for the fuel system, I would start with the pick ups in the tank. Make sure that the screens are clean. If they look good, then I would double check the fuel lines, and the fuel selector are clean. If they are clear, then I would check the fuel filter inside of the carburetor with the diaphragm fuel pump. If all of those item are clean, then I would look into rebuilding the carburetors. If you need to rebuild the carburetors, makes sure to only use the mikuni rebuild kits. I removed the choke on my carbs and installed a primer.
Yes sir! I'm doing a write up on it on xH20 if your interested. www.x-h2o.com/threads/2011-superjet-defoam-rrp-adjustable-footholds-install-and-engine-mods.206208/
@@officialyoutubemachinist Have you had a chance to ride with them yet? I picked up a set of standard footholds but think the adjustable might make more sense
@@55weedlover I have. I use to have a set of the standard ones in it. I removed them for these. I have only ridden it a couple of times so far since finishing these up, but I really like them. You'll end up widening your stand a couple of inches with going with these from RRP.
@@55weedlover Hey thanks! I really appreciate it. As of right now my feet are a little more forward than my old ones, but I also have them as far forward as they can go. I find for just cruising around, that's where I like them. This is about 3" of adjustment with these holds. For riding in surf, I'll move them back a little bit.
Anything is for sale for the right price. Here’s a link on xH2O, to write up I did on my total build. If your serious, message me on there. www.x-h2o.com/threads/2011-superjet-defoam-rrp-adjustable-footholds-install-and-engine-mods.206208/
You can put an hour meter on them, I don't have one, so for me there is no accurately know. I have a good guess, because I rebuilt the motor myself, and this is when I first started it up, and finished installing my new footholds.
Foot holds look dope! Nice job!
Thanks you. I really appreciate it!
NICE!!
Thanks!
Super joli mon ami ton 700 Superjet à tout hasard j'ai une question tu sais comment se réamorcer le circuit de carburant sur ce type de jet car j'ai le même mais j'arrive pas à réamorcer le carburant jusqu'au carburateur si tu as une info merci
Hey thanks! As for the fuel system, I would start with the pick ups in the tank. Make sure that the screens are clean. If they look good, then I would double check the fuel lines, and the fuel selector are clean. If they are clear, then I would check the fuel filter inside of the carburetor with the diaphragm fuel pump. If all of those item are clean, then I would look into rebuilding the carburetors. If you need to rebuild the carburetors, makes sure to only use the mikuni rebuild kits.
I removed the choke on my carbs and installed a primer.
Waht the tuning parts please ❤
What
As in carb spec for the pipe? Or would you like to know the complete list of parts that I put on it.
RRP foot holds?
Yes sir! I'm doing a write up on it on xH20 if your interested.
www.x-h2o.com/threads/2011-superjet-defoam-rrp-adjustable-footholds-install-and-engine-mods.206208/
@@officialyoutubemachinist Have you had a chance to ride with them yet? I picked up a set of standard footholds but think the adjustable might make more sense
@@55weedlover I have. I use to have a set of the standard ones in it. I removed them for these. I have only ridden it a couple of times so far since finishing these up, but I really like them. You'll end up widening your stand a couple of inches with going with these from RRP.
@@officialyoutubemachinist Do you find your feet positioning farther forward vs the old set? Nice write up btw 👍
@@55weedlover Hey thanks! I really appreciate it. As of right now my feet are a little more forward than my old ones, but I also have them as far forward as they can go. I find for just cruising around, that's where I like them. This is about 3" of adjustment with these holds. For riding in surf, I'll move them back a little bit.
Wanna sell it?
Anything is for sale for the right price. Here’s a link on xH2O, to write up I did on my total build. If your serious, message me on there.
www.x-h2o.com/threads/2011-superjet-defoam-rrp-adjustable-footholds-install-and-engine-mods.206208/
Standing Jesky how to know the hours it is used?
You can put an hour meter on them, I don't have one, so for me there is no accurately know. I have a good guess, because I rebuilt the motor myself, and this is when I first started it up, and finished installing my new footholds.