Handlebars & Suspension UPGRADE Mods on Jansno X50 eBike - Cargo Bag install

Link to products in description below. This video depicts 3 upgrades or modification to Jansno X50 electric bike to improve riding comfort: New Handlebars, Adjustable Air Shock & Install Cargo Bag to carry tools, water bottle & etc. Air Shock allow fully adjustable suspension in the rear.
#amazonfinds #ebike #jansno #jansnox50
@jansnoebike_kayee-sc5wl @Electrek @theebikesshow @EbikeSchool
Link to products:
Link to all the parts on Amazon: amzn.to/3Qv8ZsY
Rear Air Shock (165mm) AliExpress Link: s.click.aliexpress.com/e/_Dk1...
Shock Pump AliExpress Link: s.click.aliexpress.com/e/_DdI...
Link to full face helmet amzn.to/41HF1py
Link to buy Jansno X50 eBike on Amazon: amzn.to/3VKX6mb
Link to buy X50 in Europe (smaller motor) s.click.aliexpress.com/e/_DC7...
Chapters:
0:01 - Intro
0:51 - Remove old Handlebars
2:45 - Install new Handlebars
6:34 - Install new Cargo Bag
7:37 - remove old shock & install new Air Shock
10:40 - Conclusion
FTC: Some of the products linked above use income earning auto affiliate links, which means that if you click one of the links and purchase a products, I could receive a very small commission (at no additional cost to you)
www.jansno.com
www.v8fatbike.com
www.qmwheelscooter.com
www.amyet.com
www.ridstar-ebike.com
www.happyrunsports.com
www.emoko.com
www.super73.com
www.area13ebikes.com

[@CrashloveXO]

Very nice! The first thing I changed on my X50 were the tires. The stock tires were complete garbage for me. 2 flats in ghe same month. Bought some Ultraverse hybric tires (city/mountain) and theyre MUCH better.

[@BRichSolution]

Yes, tires would be a good improvement like Kendra I put on my other bike
czcams.com/video/N46Q1MUjt2Y/video.html

[@navavas6937]

Merci beaucoup pour votre aide précieuse ! 👍

[@BRichSolution]

Your welcome

[@SMOKEY-JAYS-DIESEL]

Awesome 👍🏻

[@BRichSolution]

Thanks 🤗

[@SMOKEY-JAYS-DIESEL]

@@BRichSolution absolutely 💯

[@Uptrail_PEV]

I did a few upgrades as well . The seat colour is my next project needs to be black

[@BRichSolution]

Black will be cool

[@mariuscantona]

Hi, thanks for your videos ! I’ve learned a lot! Just a question regarding the A5 shock 165. Is it the simple or the double air ?

[@BRichSolution]

Yes 165mm double chamber here is link to it Link to all the parts on Amazon: amzn.to/3Qv8ZsY
Rear Air Shock (165mm) AliExpress Link: s.click.aliexpress.com/e/_Dk1F66B

[@mariuscantona]

@@BRichSolution thank you !

[@bogdanproko2612]

Very nice video! I did the same upgrades to my X50. In addition, I also changed the fork with an air one from Bucklos. It's not perfect, but it does its job better than the original. I also changed the pipe with a BMX style one. On this occasion, I also got rid of those spacers that didn't look very good. I also had an air rear shock absorber, just like the one you installed, but it didn't work for me. Maybe I found a defective part. In the future, I would be tempted by a larger capacity battery (20-25 Ah) and maybe 52V, but I'm not sure if the controller can handle it.

[@BRichSolution]

See video for adding extra battery to Jansno X50
czcams.com/video/7SJJN58bykM/video.html
I have put the bucklos front on my other ebikes and not sure i want to put that money into the x50

[@tomstickelaz]

@@BRichSolution At this point which is your favorite bike , ridstar q20, amyet g60 or something else?

[@mariuscantona]

Hey! Would you care to share the Bucklos fork you’ve installed ? Like dimensions ? Thanks !

[@bogdanproko2612]

@@mariuscantona I bought it from Ali Express. I put the link in a previous message but I think it wasn't approved because o that. The indicative dimensions are: total length 675 mm, upper crown to lower crown 200 mm, steerer tube length 260 mm and 28.6 mm diameter (1 1/8), distance between axle 135 mm, travel 140 mm
Just be sure to choose the right size (20 inches or 26 inches) based on your bike.
One of the advantages of this fork is that the lower crown and upper crown are adjustable. They both have screws. There are models with a welded lower crown. This helps you make small adjustments to fit the fork perfectly on your bike.

[@GlorifiedGremlin]

​@@bogdanproko2612 The bucklos YINO right? I have the same ones coming after bending the stock forks lol You didn't have any issue with the steerer tube on the bucklos being shorter? It looks like you lose 50-60mm of height compared to the stock tube

[@jahbrake9791]

Great upgrades! I hated those stock bars too made the bike look ugly.

[@BRichSolution]

Lol and I agree. They are uncomfortable too

[@roblucas9599]

cool....

[@BRichSolution]

Thanks

[@memes_n_golf]

What bars did you buy

[@BRichSolution]

Link to all the parts in description or use Amazon link amzn.to/3Qv8ZsY

[@marcosgalvan2629]

Change the seat

[@BRichSolution]

Better look or more cushion?