How to Install a Wall Hung Vanity | Mitre 10 Easy As DIY
Vložit
- čas přidán 4. 09. 2024
- If you've got an old bathroom vanity that you want to upgrade, a wall hung vanity is a great option, especially if you're short on floor space.
See the full guide here:
www.mitre10.co...
thanks mate, very thorough vidoe. I watched this vid abt 5 times and hung my vanity on brick wall. Very happy with the result. Plumber was asking for $1000 for this work :D
that was a nice plug idea for taht floor. People usually say cut the floor till you get to the supports and screw down a new piece or nail a box under the floor to the joists so that you can nail the floor to the box.
Great job!
Really helpful video, love mitre 10! Got one question, the 2 screws to fix it to the wall are strong enough? Cheers
yes
Wow! That`s great! But.. who knows what sort of problems I can have if I do this myself (with no plumber license). I can do this due to overseas license, experience and, I`m an engineer. I don`t want pay thousands dollars for an easy jobs. Thank you for your advises
Very nice explaining of tasks step by step, I really learned New skills, keep up the good work. Thanks for uploading great video.
Glad to hear it! Thanks for the great feedback 😊 ^James
Great video 👍🏻
This is great stuff,thanks 👍
Great job 😊
Lo haces ver muy fácil, pero ni imagino estar haciendo diferentes bases para cada altura
if you were tiling the wall would you ,tile first or tile around the vanity
I'm not the most observant but when u said the plumber is to silicone the vanity top down .. u have already applied to the vanity and wall . I would suggest that be done after the plumber has done his bit or you caint remove the top 🤔
Hi Kaylah, the plumber does the siliconing generally as its part of the consenting process that this gets done by the plumber to avoid any leaks. You have a good point though - the way it's mentioned here is a bit confusing - so I'll ask our team to update the instructions to make sure it's clear. The correct order would be to get the plumber in to reconnect pipework / taps and silicone the basin on to the vanity, and then you can silicone along the wall behind the vanity. ^Meg
Id love to try this by myself but think i would run into all sorts of problems
Nice work.
But it's a wet area, shouldn't the wall lining be a fibro cement type cladding.
He used a water-resistant gypsum board, which passes code here
This guy needs his own tv show or online course website he would make a killing
Great video. Can you please show us how to install a toilet with hidden cistern? Thank you
This is a really good tutorial.
Would have been nice to see how you measured so perfectly for the cutting of the holes.
Handy, cheers
Very nice
Why not just put a weight on the plug
Nugs?
What if there are tiles on the wall. It starts to get real big
Use a tile drill bit, tile screws with a plastic screw insert, then same method as attaching to wall board. Probably limited as to where you can put it though, only where the studs are.
Can you please just come to my house and do it lol
Lol, I had the same thought😂 How I wish someone could help!
Haha, I'm watching these videos cause I'm a builder apprentice, so want to learn haha.
😂😂😂😂😂😂
Thought the same haha
Awesome
Great video
How easy was it to relocate the drain pipe?
Will depend on the size, and a plumber is alway recommended! You'd be best to contact a local plumber for the best advise 😊
I'm not a youtube to hear about having to go to a licensed plumber
Where was this vanity from please??
You put the thread tape on backwards. Good thing you’re not a plumber
how did you remove the drawers?
The draws on the original vanity didn't need removing, as they were part of the vanity piece in this case ☺️ ^Cam
You completely skip the difficult part - assembling the enclosure. They are a pain single handed and I'd love to see an easy method.
how to build hanging cabinet for clothes
S trap?! Not safe!
Who the fuck taught you to put thread tape on wrong direction!
Should call your channel "Easy As". Mitre 10 ? meh.
As this seems to be geared to an audience on the east side of the pond, you really should add a few of disclaimers for your US viewers. 1) you say permits would not be required - As permitting requirements in the US are set by individual jurisdictions there is no way to make that claim. One town may require a permit while their neighboring city may not, 2) licensed plumbers may or may not be required - there are areas here where there are no plumbers licensing requirements. 3) "S" traps were removed from all US plumbing codes about 50 years ago. Cannot believe these are still acceptable on your side, how is the waste line vented? Best Wishes
Are you special ED? this isn't even in the US... This is a New Zealand company for New Zealand viewers
@@daddybear8849 So are we to assume that the laws of physics do not remain constant - "S" traps are still failures waiting to happen. As for my other comments, they are 100% applicable to a US audience which is likely to be bigger than the entire population of New Zealand. You need to realize that this is a global forum where something that is permissible in one part of the world may not be in another. As I said - he needed to add a disclaimer for his global viewers.
@@denali9449 Believe it or not Denali, the world is a hell of a lot bigger than the U.S. The world doesn't revolve around you.
And no one give a sh*t about your states population compared to our country. Condescending prick.
@@ItzCoopzFtw Normally I am a very laid back guy who would let this kind of verbal diarrhea roll off my back but today is a different story. First, all I said was that since this was posted worldwide, the author needed to add a disclaimer that it was only valid in a certain country / area. Items he spoke of are not allowed by the major plumbing codes around the world. Secondly my comment about the population of New Zealand was not slam rather it was to put into perspective the percentages of the population the post would reach compared to the target audience. Third, as for your comment; you would be speaking Japanese if we had not saved your sorry butt. No criticism, no brag, no ownership, just fact. So take your false pride and insert it where the sun don't shine. I am sure there re a great number of worthy folks in your country, too bad you are not one of them.
@@denali9449 Saved? You didn't save sh*t. You weren't alive idiot.
And your condescending attitude is everything f*cked up with your country.
You don't speak for the whole world. This *Mitre10* group is based for Australia and New Zealand. If you want to know American crap, go learn from an American group.
I wouldn't be saying anything if you hadn't mocked our country in the first place. So go f*ck yourself. 🖕🏽