1 Channel DC12V Remote Control Switch QIACHIP KR1201
Vložit
- čas přidán 11. 08. 2016
- 433Mhz Universal Wireless Remote Control Switch DC12V 10A 1CH relay Receiver Module and RF Transmitter 433 Mhz Remote Controls
From:
www.aliexpress.com/store/prod...
Working mode: Momentary, Toggle, Latching
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically .
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully . - Věda a technologie
thank you for your video. I would to set “B” mode on three different remotes. how can I do? thanks
I am glad to answer your question.
Before solving the problem, I will first confirm what you have.
1. You have three remote controllers.
2. You have the product in our video.
Because different manufacturers may have different settings, my answer is for our brand of products.
For three remote controllers, you just need to set the B mode according to the demonstration in the video.
The B mode you mentioned is our Toggle mode.
Method:
Push the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off, it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Just operate the three remote controllers separately, you don't have to worry about mutual influence.
Looking forward to your feedback later, I hope to solve your problem.
It was driving me nuts until I saw you video. Thanks.
Thank you
you saved my life, thanks a lot
Thanks for your instructional video. It worked GREAT!!!
TKS !
All clear. Thank you!
Thank you!
Thanks for the video, it will help me a lot in what I'm going to apply
Thank you.
Hi im thinking of putting one in my car. so if the remote is on and then i tune the power of to the car off and back on will the remote default to on or off or can you set it to one or the other thanks for your time
wired as per the pic... light goes on, how do yo make it STAY on (or off)
Thank you to your video, this is what I need.
Are there any videos that show the wiring setup ?
why sometimes I have to press few times to switch this on although I am only 1 feet away? All 5 units I bought are all the same problems.
Muchas graciaaaaas, hasta que por fin pude gracias
Молодец. Все коротко и четко ясно.
Can you explain how it’s wired. Can you do it with a travel charger ?
obrigado amigo me ajudou muuuuito, masbcomo eu apago as configurações do mudulo?
How to delay on use Normaly Close/delay On ?
How would I control a skylight (open and close) from this type of relay? I would need the reverse polarity to close it after it is opened.
try to use a dpdt relay
Thank you very very much
Great! Thank you!!!!
отлично!!!
hay algun rele wifi que tenga entrada corriente 220AC y salida de 12V, 24V DC?
Why device turn off suddenly without pressing remote?
Please help!
What supply ur using? Battery?
hola buena noches
Donde esta la conexión a la batería ?
Can you tell me by guessing what will be its Range..I in Need of Controlling Indication Lamps From 750meters away!
The remote control in the video is just an ordinary remote control, it can not meet your requirements.
Hello can you tell me the model of ic 8 pin near relay
Que radio de alcance tiene la señal remota
Does receiver remember the transmitter codes if receiver’s supply battery is disconnected?
Power off does not make the memory disappear.
How do I modify a 12V 433MHz wireless remote control switch relay receiver and transmitter? Someone in the area (neighbor) is using the same frequency.
It is not recommended to change the frequency, it is recommended that you reset the receiver and re-pair it
Can anyone please tell me that what is the name of this colour changing LED bulb?
Thanks in advance.
RGB led
Антену с приемника можно вывести из коробка, что-бы пульт дальше и лучше работал, провод припаять длинный и вывесьти из гаража на улицу например ?
wat battery do u use?
What happen if the relay is not working but the receiver receives its signal
Hello, I bought a module like this, but it does not recognize any control, I already did tests with several, I clean the memory of the module but it does not accept to record the signal of no control, could you help me?
Different sellers' products may be different.
It is recommended that your receiver and remote control come from the same seller.
Mine suddenly stops recognizing its remote. Please help
it does not work , the one i got looks just like this one only the capacitor is in a different place , right up against the middle of the relay, and it says "quichip RX480-S" on the RX module. i hit the button 8 times and the light flashes just like this one i press the learn button once and it blinks quick then light is out then it comes on solid but when i press the button on the remote the light never blinks i tried it with 6 different 433MHz remotes and it does nothing it won't learn any 433 RF at all
Dear friends,
Maybe your remote control has a problem.
Hola , este receptor se puede emparejar con un sensor inalámbrico que funcione en la misma frecuencia y con codificación Ev 1527 para que dispare una sirena y se pueda cortar con el llavero?
hola, buenisima pregunta. estoy hace un tiempo intentando hacer algo así y no quiero comprar cosas q despues no funcionen.. pudiste hacerlo?
You wrote: Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically .
My question: How do I adjust the 5 seconds, 10 seconds, 15 seconds or another time delay?
Hi
It were approximately time counting.
While you finish the procedure, every step will have a light change( on or off) when it is finished.
How can I now if the receiber I have is 315 or 433 MHz
Hello, you can read the product description from where you purchased the receiver.
Wiring diagram showing???
What do you call that black thing? The one with LED. Hoping for your fast response
I reply to you as soon as I see the message.One is aa battery box with switch；it has not LED.
sir without battery u connected sir, send clear video please
Do you know how I can wire this in to my 12v golf trolley
Hi, how many consoles can I link to this board? Thanks
25 pcs
have you got a wiring diagram for this ?
Yes, it has a wiring diagram. You open the link in the transcript to find the wiring diagram.
Well that's about as informative as a fortune teller !
hi there, great video, i have the same as above but when i press the button 8 times the light just stays on solid for about 20 seconds, i then press the learn button and can program the remote fine as the receiver responds and clicks on when i press the remote, but there is not output power! i have tried all 3 terminals with a multi meter and nothing, i sent for a new one and it's the same, any ideas?? thanks - mial
Hi, in this condition we would susggest you to check the wire diagram, if you can leave your email, I will send you the wire diagram.
thanks, i have already tried all combinations, but any help will be grateful my email is mial_uk07@yahoo.co.uk
Hi mate, I'm the exactly the same boat as you, bought a second one and the same how the heck do they work? And did you have any lucky?.. I'm trying really hard to see how this video has got them wired but it just looks like there is no battery wired just looks like all wires go to the led bulb.
Can this be used for direction control of as DC motor?
This module does not control the forward / reverse rotation of the DC motor.
The function you need is this module: czcams.com/video/kneye0tdBeM/video.html
thanks broooo
Excelente video pero sigo sin poder conectar wl faro que necesito es para un auto el diagrama de instay lo puedes compartir?
Where is the board getting its power from?
The power in the video is a battery box; there are 8 pcs 1.5V batteries.
please send circuit diagram
hola, te hago una consulta desde mi ignorancia. la idea sería algo así!! intentar hacer funcionar este receptor de 12v de manera autónoma (alimentarlo con una batería de moto de 12v, y la salida de este a una sirena de 12v) "para cualquier caso de corte de luz" y vincularlo a un sensor magnético o de movimiento inalámbrico de 433 mhz. es posible?????
De ser posible hacer esto, sabrías q sensor puedo comprar a parte del receptor este??
Muchas gracias y disculpa por la extensión de la pregunta...
Oh, thank you for your question. I am very interested and happy to communicate with people who have ideas. As you know, the product demonstrated in this video is a 12V remote controller with the ability to remotely control switches. Now that you know how to power it, you need to know what you are controlling remotely? For example, the alarm has a switch connected to the button of your car. Once the button is pressed, the alarm circuit is connected and the sound is sounded. This controller also has the same function. You only need to buy a receiver. The remote control you mentioned can be achieved by using the controller and a remote control, and the rest is a matter of circuit connection. If you have more questions, you can continue to ask me questions. I will reply in time when I see them.
this don't help what wires go where ??
I couldn't understand a word ya said, hahaha just joking great video sir.
Which is the distance to use it?
I bought 20 units, and when I am at more than 20 centimeters (1 ft) it does not work.
Can I change the antenna?
You can replace the antenna or stretch the antenna.
Your remote control needs to be the same as the frequency of the receiver, and if their frequency deviation is large, the remote control distance will be shortened or Can not be remote.
Can you help me? I have similar relay, but it does not work:
1. Relay led flashes twice when remote is on, but latch is not reacting.
2 After clicking relay 8 times I expected it to reset, but it still reacts to the remote
czcams.com/video/m_bOeXr2x8E/video.html
If I cut the electric fluid, it will erase the code
Sir, the code will not get erased even if you cut the power. Once the Receiver and the Remote control are Paired, it will always stay paired. Unless you erase the code from the receiver.
the momentary function works only for 10-20 second continuously... shame.
Can you try if work with 6v
Sorry, it can not work at 6V.
and with 9v? please can you try if work
Yes it can work in 9 volte but the problem after a while the relay wont work if you're using battery. Got it? The receiver still working but the battery after a while got voltage drop. But if you change the relay from 12 v to 5 v you will be fine. ..hope this help
good idea to change the relay but it does not break relay with a battery 9v?.. another question: once the contact of relay is "on" the receiver continues to absorb tension?..or function like a normal relay
how match voltage consum whe is in standbay
what is your purpose. other to press buttons. not good
Mas misal saya mau jadiin kontak on off sama starter bisa ga ya dalam 1 relay ini ?
sure.
You can use Toggle mode or Latching mode.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
sir ya remote kaha milaga aur is ka rate katina hai
Thank you so much! Hope you a success business.
It would help if you explained what you were doing. Otherwise, you can't follow the video. Cheers.
This is a demonstration of how to match the remote control with the receiver, and explains how to set the receiver's operating mode.
Detailed text description below the video.
আসসালামু আলাইকুম এইটা তৈরি করা সেখান
Renge kitani hai o batao na
About 50 meters
I want to buy the products
How i can get?
www.amazon.com/gp/product/B07DC2N41N
Hello,this is the purchase link.
Price Kitna he link
qiachip.com/collections/qiachip-dc-12v-1-channel-remote-control-receiver/products/12v-1ch-universal-wireless-remote-control-switch-receiver-module-and-rf-433mhz-transmitter-kr1201
All this done on the same frequency. Not very useful. I need more frequencies.
Hello, the product can only be controlled when it has been paired. If your product is interfered by neighbors on reception, you can cancel all pairing data by clearing the code, and then pair it again.
सर मैं आपसे बात करना चाहता हूं अपना मोबाइल नंबर दे दे जल्दी नहीं किए
Not helpful at all! I need to know what's going on and how to program/wire the thing. Watching you click the buttons with no explanation is pointless.
CostumeTrek please watch the video carefully, especially the LED lights. Every time you push the button, the LED will flash for once.
Poor wireless remote range
Non si capisce un c......
Brincadeira eim ! Mostrar led acende apaga😎😝😯 porque não vai plantar batata!👎👎👎👎👎