See how we clean fuel injectors on a budget. Its cheap and easy. These are fuel injectors for and LS 5.3 motor we took from a junkyard. Watch as the LS swap begins to happen on the Jeep YP LS swap.
Wouldn't it make sense to do it backwards to get out anything that might've made it past the fuel filters or junk that was too large to pass through the bottom?
Brake cleaner or carb cleaner is just fine. I wouldn’t leave it soaking overnight or anything but blasting some through won’t hurt anything. I just used a clear hose and filled abut 3-4” with carb cleaner then used air from my compressor to blow it through. Started as a tight stream and ina few seconds switched to a nice atomized spray
This is the best video I seen thank you very much very helpful im from UAE County
You’re very welcome. Glad this video helped!
Saved meh 300 bucks cylinder 2 miss fire after changing plug and coil this exactly what it was number 2 injector was the problem
Guess I'm off to do this now
Ingenious guys.
Thanks!
Dat was Kool!!!
Thanks for the video very helpful
👍👍👍👍👍
Gump you're a damn genius
🤣🤣🤣🤣🤣🤣
Wouldn't it make sense to do it backwards to get out anything that might've made it past the fuel filters or junk that was too large to pass through the bottom?
“Jimmy rigged”
So smart!
We try! Thanks for watching!
Make your hose shorter my man so you can get more pressure out your can...good video tho bro
Just use the clear hose and fill with carb cleaner and blow it through with air from a compressor
Nice trick!
its a sketchy hack LOL
:58 that’s what she said
Did it make a big difference after you installed them back in the motor?
Yes!!
Smart
Cheap and easy!!!
Do you have to use a 9volt battery? Can you just use fluid tube and push it through with a air compressor?
It needs current to open up
HELL YEAH
Cheap and easy! Gotta save that money for turbos!
A lil spit goes a long way 👀🤣
By any chance you know the size of the hose you used diameter wise I was thinking like 3/8?
Sorry don’t recall but they were stock
You guys are lucky you still have facial hair lol
😂
So the brake cleaner won’t ruin the fuel line or cause a bad mix?
Did you ever got an answer from your question, it is safe to use break cleaner?
It works just fine for us and never had a problem.
Brake cleaner or carb cleaner is just fine. I wouldn’t leave it soaking overnight or anything but blasting some through won’t hurt anything. I just used a clear hose and filled abut 3-4” with carb cleaner then used air from my compressor to blow it through. Started as a tight stream and ina few seconds switched to a nice atomized spray