What a pain in the rear I can't figure this thing out sometimes I get it right other times I don't know what I'm doing these directions are terrible when it's working it's great but as soon as those batteries go out I can't remember how to set it
You know what I hear this question all the time and you can do 3 things with your clock. The 1st thing you can do is watch my manual video for this product on my CZcams Channel and Playlist 📝 for this product or the 2nd thing you can do take the item back if you have the receipt and the last thing you can do is take this item to a place that is out in open and just beat the crap out of it to release your stress. The 3rd thing always works out for me 👍
No matter what I read and do I cant get the outdoor temp to show . Any other suggestions besides taking the batteries out and waiting and putting them back in? I tried all that
After 2 days, I'm still waiting for it to receive the atomic WWVB signal for time. My other atomic clocks sync up within 12 hours whenever I change batteries, so I'm starting to get impatient. LaCrosse customer service told me it take up to 5 days to get the correct time which is unacceptable to me.
You might have to check where you position the outdoor sensor if it's not within the 300 feet distance that could be wrong.. that's what gets a lot of people..also try and look at your manual at the trouble shooting for any problems and see if that works for you
I got mine a couple days ago. The outdoor temp sensor registered almost immediately and when I put it outside, it started slowly going from the indoor temperature of about 70F down to 46F. It took about 15 minutes to settle at 46F. Don't know if that helps.
What a pain in the rear I can't figure this thing out sometimes I get it right other times I don't know what I'm doing these directions are terrible when it's working it's great but as soon as those batteries go out I can't remember how to set it
You know what I hear this question all the time and you can do 3 things with your clock. The 1st thing you can do is watch my manual video for this product on my CZcams Channel and Playlist 📝 for this product or the 2nd thing you can do take the item back if you have the receipt and the last thing you can do is take this item to a place that is out in open and just beat the crap out of it to release your stress. The 3rd thing always works out for me 👍
The outdoor sensor has to be positioned at least 300 meters away from the main unit? ( see @ 0:40 )
Check out my manual video for further information on this product on my CZcams Channel and Playlist 📝
No matter what I read and do I cant get the outdoor temp to show . Any other suggestions besides taking the batteries out and waiting and putting them back in? I tried all that
No other suggestions other than keep trying or keep reading my manual video on my CZcams Channel and Playlist 📝 for this product
It doesn’t set the time itself from the signal it receives? I would have thought you wouldn’t need to set the time manually.
Thanks for watching my video
After 2 days, I'm still waiting for it to receive the atomic WWVB signal for time. My other atomic clocks sync up within 12 hours whenever I change batteries, so I'm starting to get impatient. LaCrosse customer service told me it take up to 5 days to get the correct time which is unacceptable to me.
How long does it take the outdoor temp to show the accurate temperature? I tried several times on different days and it still show wrong temp. Thanks.
You might have to check where you position the outdoor sensor if it's not within the 300 feet distance that could be wrong.. that's what gets a lot of people..also try and look at your manual at the trouble shooting for any problems and see if that works for you
If anyone else has this model and they experienced the same problems and they got it to work please comment.. 👍
Thanks for watching my video
I got mine a couple days ago. The outdoor temp sensor registered almost immediately and when I put it outside, it started slowly going from the indoor temperature of about 70F down to 46F. It took about 15 minutes to settle at 46F. Don't know if that helps.
What the purpose of Beep ON/OFF? when ON?
Not sure.. just what they probably programed into the clock
Thanks for watching my video.. check out my other videos on my CZcams Channel and Playlist