How to Make a Wooden Snowflake - Holiday Woodworking Project

This video walks you through the process of building, finishing and mounting a DIY Wooden Snowflake. I will teach you some tips and tricks along the way to show how I accomplished this festive holiday project!
Follow me on INSTAGRAM:
/ createkev
Music used in this video:
Music by Azla. - Move - thmatc.co/?l=6A7E1D62
Music by Obie Hans - Artful Haze - thmatc.co/?l=65BF8B98
Music by Obie Hans - Abstract Concepts - thmatc.co/?l=ADF605D0
Music by Obie Hans - Analogue Shades - thmatc.co/?l=FCB4A290
Music by myk - Balloon - thmatc.co/?l=9B92213D
#holiday #wood #woodworking #woodworkingart #woodwork #diy #decor #decoration #art #artist #show #showflake #project #woodproject #howto #process #festive #holidays #christmas #christmasdecor #christmasdecorations

[@HiTwinky69]

I like it!!

[@davilafamily7556]

Love the project. How much would you sell them for?

[@jessicafelix2946]

Would you mind sharing the measurements, please

[@tomt9543]

Go to “DIY Builds” - snowflake shelf. You have to go to his store, then gift plans. Some thoughts after building several of these: if you’re going to use it as a shelf (as the DIY Builds does) you’ll want to make it out of 1x3’s. Glue and nail on the short pieces before assembling anything else. Be sure to rub a light coat of wood glue on the end grain of any end that will attach to another piece 15 - 20 minutes before actual attachment to seal up the porous end grain. That makes a much stronger glue joint because otherwise the majority of the glue will get sucked up those 100’s of tiny straws that are end grain! I’ve also changed the way I build these things by reducing the number of “spine” pieces from 5 to 3 by cutting 3 - 3’ pieces and doing a three way lap joint in the middle! It makes the basic spine rock steady! They’re actually a PIA to build, but the ladies love them!

[@mackgerlack9535]

Need measurements. Please