1970 TR6 - Part 26 - Steering Column Installation
Vložit
- čas přidán 6. 09. 2024
- Assembling continues with the steering column. First let's get all the stalks installed, get our brackets ready and install everything under the dash.
Rusty Beauties Website:
www.rustybeauties.com
Buy Rusty Beauties merchandise:
my-store-df5ca...
Join the Rusty Beauties Facebook group:
/ 3028660134022715
If you like this channel please consider supporting it! It takes lots of time and effort to film and edit these videos and your support will help me spare more time for that!
If you wish to support it on Patreon you can do it here:
/ rustybeauties
If you wish to make a one time donation you can use this link to make PayPal donation at a any amount:
www.paypal.com...
The financial support to the channel doesn't buy you anything special. There is no such thing as early access or VIP content here as I don't want to take away from those who can't afford it. The financial support is your way of saying thank you if you feel like it and you can afford it. Just being here, watching, liking, sharing is also a big support and I appreciate it.
THANK YOU!
#rustybeauties #TR6 #Triumph
Thanks for the shout out, you are welcome!
Once again Jim I really appreciate the parts. Can I at least reimburse you for the shipping?
Excellent documentation Elin, thank you!
I am at a loss for words about your generosity in the philosophy expressed at the end of the video. You are one of a kind, and hence deserving of support.
I love the community here that comes together to get the projects done!
You have the best fans!
Thanks Jim. I really appreciate the parts. The Rusty Beauties is the best. Thanks Elin.
It’s going to be fabulous John, best wishes to you buddy. 👍🇬🇧
I don't remember TR-2-3 &4 steering being that difficult, but then when I was working on those cars I was a lot younger 😅.. Excellent video Elin, and very enjoyable watching you work out how it eventually went together.
I'm glad i worked on and under my dash when i was just 60 years old because now at 69 my back hurts just watching you ! Stay forever young Elin and thank you for posting and sharing your knowledge with us on these truly classic and magnificent cars
Great video, on a topic you just never see.
It is after midnight here about 30 minutes after you posted this, but I'm going to watch it anyway before i go to bed.
When you did the unboxing of the donor brackets you should have said “Let’s get unpackalacking” 😊
Very good! 😁
Elin your big screen presentation- (of the wiring diagrams in particular) is very very good 👍👍
You have sent us a great amount of your knowledge in this video. You have made the steering column just another piece of the car instead of being a mystery.
The ZIP tie is a most wonderful tool, so helpful with working on these cars!
Another great video
my 69 TR6 has only one tie rod, bolted same way as you have.
The 'flash to pass' feature relies on a small plastic tab, that's easily broken.
You're best to use the floor switch.
Interesting question about the steering lock. My January 1970 Heritage Certificate actually mentions ‘steering lock’ as a separate factory fitment. Not sure if this was an option, or a North American market standard fitment? Interesting that it’s specifically mentioned though. Unfortunately my car was butchered with a Small Block Chevy and they mounted the ignition switch in the plinth housing, so not sure where my actual ignition switch was originally. Ignition on the dash and a separate steering lock? Don’t think so, but who knows. Thanks for covering all that switch stuff too. I had a ‘73 before and didn’t realize I should expect a different layout now.
The US Congress mandated locking steering columns for 1970. The ignition switch for the 69 NA spec cars was on the center plinth/console. Triumph dutifully implemented a locking ignition switch on the steering column located between the knees. You need have a rubber arm to reach around the steering wheel to access the key. What I do is reach through the steering wheel spokes. It seems a little easier for me.
Hello Elin, i want to order two cap’s but the site meldet to me that there was a problem to pay with my credit Card.
I appreciatie your video’s cos i have one TR 6 out of 1971 .
I learn very muche from you. Thanks your great.
I try further to order to caps .
Nice,coming together.just continue on doing what your doing and doing carry on.great video as always 👍👍👍😎😎😎
Maybe those two soft foam rounds are just draught excluders to stop draughts and fumes coming into the cockpit from the engine bay? ( I don’t know)..
Over the years some errors have crept into the documentation. Unfortunately for us, there is no Stanpart controlling the documentation. The “H” support is used on the early cars. The early cars (69-72) used the upper support strut only. I suspect these error snuck in when the early car and late car drawings were consolidated to show all of the part early and late on the same drawing. It takes a wary technician to sleuth out these things.
Hi Elin thanks for your videos and for sharing your knowledge.
I have the problem you mentioned with the horn on my Spitfire mk3. Means that if I want to check the wires I have to take everything out? By the moment I just disconnect the wire under the bonet cause it was horning with almost every turn...
Thank you very much!!
Wow! Fitting the steering on the TR6 is just as bad as doing the GT6. I hate having to disconnect the steering column.
The a that you used to cover the wires from the light switch, OD switch, etc. doesn't look the same as the one in the schematic (123), there was a clamp attached to it (not seperate).
Yeah, I think they added that clamp in the later years. I’ve seen it with and without the clamp
like 17
First!