DODGE PROMASTER ODOMETER BLINKS FIXED

Sdílet
Vložit
  • čas přidán 12. 09. 2024

Komentáře • 25

  • @charlesmears9014
    @charlesmears9014 Před 3 lety +1

    Thank you for this video. My odometer is flashing after minor front end accident, no air bag deployed. I am getting the "incorrect component installed" error and airbag light is on. So I think this might fix it. I am grateful you took the time to record.

  • @raymonddriggers
    @raymonddriggers Před 2 lety +1

    How did you resolve the blinking odometer reading? My battery needed to be replaced and I tried to crank my van before replacing the battery and it was nearly dead but it was enough to crank the van but when it cranked barely it cause my ESC and my ABS and my odometer blinking and my ambient air temperature to flat line so all these trouble codes came up on the dash by cranking it with a low battery charge, any information you could give me would be helpful thank you

    • @quickautomotivediagnostics8728
      @quickautomotivediagnostics8728  Před 2 lety

      solve the battery problem first and get a scanner to reset the proxy.

    • @raymonddriggers
      @raymonddriggers Před 2 lety +1

      @@quickautomotivediagnostics8728 thanks so much! I put a new battery in and I will give that a try, Really appreciate the quick reply!

  • @jasonmcmaster3939
    @jasonmcmaster3939 Před 3 lety +1

    I have this same issue with a 15' Promaster City I just bought and the local RAM dealer is clueless about it...apparently the head unit was replaced with another OEM radio and think that is why the Odometer is flashing!

    • @quickautomotivediagnostics8728
      @quickautomotivediagnostics8728  Před 3 lety +1

      Thanks for comment. You are absolutely right, these Promaster need Proxi alignment after any electronic part that is on CAN bus or LIN bus that have been replaced.
      Please SUBSCRIBE to my channel and if you like the video give it a 👍🏾 like.

    • @quickautomotivediagnostics8728
      @quickautomotivediagnostics8728  Před 3 lety

      THAT IS RIGHT.
      YOU NEED TO PERFORM PROXI ALIGNMENT

    • @jasonhooper7682
      @jasonhooper7682 Před rokem +1

      do you know where I can get tool to do proxy alignment

  • @Lovelydavid399
    @Lovelydavid399 Před měsícem

    After you did your radio work?

  • @Lovelydavid399
    @Lovelydavid399 Před měsícem

    I need technician

  • @darkstardan3309
    @darkstardan3309 Před 8 dny

    Umm, not helpful if you do not have that $3k device :P

  • @littleche7676
    @littleche7676 Před 3 lety

    My 2015 promaster start doing same thing also my ac stop working. Climate control has no power. Nothing works about AC or heat... What you thank is the problem?.

    • @quickautomotivediagnostics8728
      @quickautomotivediagnostics8728  Před 3 lety +1

      Is there any component you have replaced?

    • @littleche7676
      @littleche7676 Před 3 lety

      @@quickautomotivediagnostics8728 no. Everything is original. Nothing added at all.

    • @quickautomotivediagnostics8728
      @quickautomotivediagnostics8728  Před 3 lety

      @@littleche7676
      You can still do the Proxy alignment and see if it’s gonna fix it.

    • @littleche7676
      @littleche7676 Před 3 lety +1

      @@quickautomotivediagnostics8728 I took it to the dealler today. Lets see what they gonna say...

    • @jetmelt
      @jetmelt Před 2 lety

      umut kosmaz what was the fix for you promaster?