How to Install a Wall Mounted Pedestal Sink (Step-by-Step)
Vložit
- čas přidán 7. 07. 2017
- Today's video shares how to install a wall mounted pedestal sink. This is a great option for small bathrooms and opens up storage space under the sink.
For more home improvement tips visit www.homerepairtutor.com/👍🏼
Helpful Links:
American Standard Ravenna Sink -- bit.ly/2tsFez5
American Standard Ravenna Sink Leg -- bit.ly/2tX8kqP
1 1/4" P-Trap Kit -- amzn.to/2trWCnq
1 1/4" Extension Tube - 12" in Length -- amzn.to/2sYaJO1
Portsmouth Single-Handle High Arc Faucet -- bit.ly/2uBKBu6
Measuring Tape -- amzn.to/2tTu2fX
SharkBite Shut Off Valves -- amzn.to/2tsyi4X
2 Foot Level -- amzn.to/2szTtPD
Drill & Drive Kit -- bit.ly/2u2LNtE
Drill Bits -- amzn.to/2sAg7HN
1/2" Diamond Hole Saw -- amzn.to/2sXLyez
Channellock 10" -- amzn.to/2u2MKC5
Caulking Gun -- amzn.to/2sAqOKn
100% Clear Silicone -- amzn.to/2uVdPDN
Ratchet and Socket Set -- amzn.to/2sAwhAQ
Ridgid Tail Piece Extension Cutter -- amzn.to/2sAwx2M
Combination Wrench Set -- amzn.to/2u2Nxmv
----------------------------------------------------------------------------------------------------------------
Installing a wall mounted pedestal sink can be a pain.
This video shares how to install the floating pedestal, sink, faucet, and even cut through wall tile.
We share a lot of tips you won't see in books or other videos. This tutorial is great for homes older than dirt.
Here's what you'll see
-how to floating pedestal sink leg
-how to set up the plumbing
-how to cut through wall tile with a diamond hole saw
-how to install the faucet in the sink
-how to install the P-Trap for the sink
-how place the sink on the semi-pedestal sink leg
This is a pretty darn good tutorial. If you have any questions please ask them in the comments. We'd be happy to help.
Watch our video for all the details
• How to Install a Wall ... - Jak na to + styl
Best bathroom sink installation video on CZcams! Really informative, real-world helpful. Thanks so much!
thanks, hope it helped. This sink can be tricky but in the end it's a great project...especially for tiny bathrooms, which can be a pain
The hardeset part about the whole installation, is the shroud removal and installation, but your video skips ahead to it already installed. Either you had a problem getting it installed, or for some reason, didnt want to show how you did it, but would be nice to see the complete installation, rather than skip ahead and it is already on the wall. How do you loosen the sink enough, to mount the shroud ?
Great job on the video. Hipster style construction is so so cool. The plumber was a cool dude and the main guy was perfect! I like that it was not exactly 24 inch water supply at 5 6 inch and not 3, and not 21 tailpipe, and still worked perfect. The tile is so nice.
Not sure if we qualify as hipsters but any kind words are nice
you didn't show the hardest part how did you attach the pedestal and tighten the 2 nuts with all the plumbing and P trap in place, plus how do you clean the p trap out on this type of pedestal
That was an amazing job. Thank you for sharing
excellent video
The bottom part of the sink (pedestal part) is that designed just to hide the pipes or is it integral to the structure
Enjoy the video thank you very much
Thanks Somaa, hope it helped
You guys always give some useful info, even if Steve doesn't always read the directions, ☺
+Sal DiBlasi lol, it happens to everyone
To me for sure. ☺
+Sal DiBlasi ditto
Uhm - so the hardest bit you didn’t show? Accessing the top bolts of the pedestal for the final fixing?
what make is the faucet and P- trap?
Once installed, what are the steps (in order) to take the pedestal and sink down to install a new faucet?
You do the opposite
That was a tight fit but it looks great. Thanks!
+J Parra it was tight, but we made it work. Thanks
That's really slick. I like the sink and that tile is gorgeous. Great work.
+John Sheldon thanks, Steve is a great tile setter
But doesn't show how to access the nuts for a final tighten on the pedestal.
5:07 No backing board, wall covered in plastic sheeting, what must I do?
Thanks for another excellent how-to. Did you tighten the pedestal bolts after the sink basin is installed? Looked to me like there's not way even to put the nuts on, much less tighten them.
+Ted Weddell combination wrench, we had to loosen the sink then tighten the pedestal nuts.
Then how did you tighten the slip nut for the drain? Sorry to be so argumentative here but I'm trying to make sense of this. Moving the sink far enough to get a wrench in there would require disconnecting the drain, or at least loosening it quite a bit. I'm thinking maybe where it meets the p-trap, must have some sort of self sealing connection. I'd hate to come back to fix a leaky drain on this sort of setup. :)
well that is 15 mins of my life I am not getting back the most interesting part was not shown. Guess I shall be hunting elsewhere to find a video that shows the complete install.
Good
My sink is leaking. How do you remove the Wall Mounted Pedestal Sink?
Small hole at the bottom of pedestal and water runs out when I run the taps
did you place the studs there on purpose for the sink? seems like really odd stud placement and unlikely for a remodel. What do you do if the sink mounting holes do not align with studs? thanks.
Yes, if I remember correctly we added wood blocking in the wall. If studs don’t align with sink holes you can attach 2x10 blocking in the wall using 3” deck screws. That way there will be solid blocking in the wall for the sink
hahah what was that manufacturer thinking by putting that 3rd hole right where the drain line is... I mean, pipes typically follow gravity down. I have yet to see a drain line coming from above ;)
The proper tool to install the mounting bolts is called a hanger bolt driver.
It is a drill accessory that you thread the machine thread end into and then you can drive the lag end into the structure.
+kendall3006 thanks for the tip, how much does that cost? And can you get it at a hardware store?
They are about $10 each. They are sized to the machine thread.
I have not seen them in home centers but they are available at a well stocked hardware store and supply houses. Easy to come by online.
+kendall3006 cool, I'll have to check them out. Wish we had it for this video
Thanks for the excellent video. You can also use two nuts that come with the kit to install the mounting bolts by locking them together and then driving with a regular wrench spanner etc.
@@HomeRepairTutor Don't need a tool. Just double up a pair of nuts and make them tight against each other with a pair of wrenches. Then use wrench or socket on outer nut to drive the whole thing in. Unloosen nuts, tada...
Can you please show me how it can be removed
That's what I was wondering. Mine has a leak but I cant access and see what's going on. Did you sort out your problem?
Flour from angle to distance
👌👍
Superb video! This is introduced straightforwardly into a vanity, with a self rimming configuration to fit flush to the best surface of the vanity. The edges are wide or flared characterizing the edges and somewhat raised over the counter surface. The lifted edge helps control spills and secure the counter's edge treatment. (goo.gl/KG8RAV)
I have a question
can you please tell me how to remove the half plummit from the sink
I send you the photos of my sink
Man.. you really need to think ahead for doing on of these.. You can't just anchor and finish. That would be some very odd stud placement lol
agree, planning is very important.
Ir3
You didn't show pedestal fitting
I would prefer 35-36" for a sink height, but the Americans with Disabilities Act specifies that the lip of a sink be no higher than 34" so if you are looking to sell your home you should probably not go higher than this.
Its not the full video
Please please please how the hell do i remove one of these bastard pedastals. Thanks