I ordered the Mobius 0.20 a few days ago. Looking forward to playing with it. From other videos I've seen, it really shines when you reduce the paint more than you are used to and drop the air pressure.
It's a really good brush for the money, but be warned, if you over reduce, which is what we're talking about here, you really have to go low on pressure and light as hell on the trigger. Especially if you work on hard surfaces like I do, as it will spider like crazy. The brush puts air out so soft and quietly that you may be pushing more air than you think. Learn to properly use that MAC valve.
I bought the GHAD-39 for less than $30 USD and it’s probably the best airbrush for its money ever. I just purchased the Morbius 2mm & 3mm yesterday and can’t wait to use them.
Well the paint you used is horrible to test a airbrush you should have used Tamaya or mr.color paint and then you would see how amazing that airbrush is.
i try and make the reviews as fair as i can and will use good and bad paints to see how the airbrush compares personally i am using more and more mr color paints now as they are fantastic
@@yorkshiremanmodelshowdy....quick question about using the blue tack sausage for masking....once you have the paint down do you remove the blue tack straight away or leave it....i leave it for the paint to dry and sometimes it works fine for me and other times i get a hard lip that i then have to carefully remove and touch up....im speaking as a brush painter....i do have an airbrush but don't use it yet as i don't have a dedicated modelling room. Tnx👍
In my experience Tamiya paints are awful....tried them a few times and absloutley horrible covearage to to piont i will never use them again.....with the exception of the "clear" paints.
@jaws848 if you are telling me Tamaya paint are Awful, are you kidding me? There's like the best paint for beginners and for airbrushing. You don't know what you're talking about, dude, you did something wrong. I am never ever heard anybody say that Tamaya paints were bad you mix them 50/50 and spray them wow
only place i have found upto now is to order direct on this link but they may become available on amazon at some point the airbrush has only just been released so it may take a while for them to appear anywhere else this is the link to the gaahleri website and store: bit.ly/3txTqZn
To get this airbrush go to gaahleri website and store here:
bit.ly/3txTqZn
I'm looking for an airbrush, this looks good, thanks for an honest review.
No problem 👍
I ordered the Mobius 0.20 a few days ago. Looking forward to playing with it. From other videos I've seen, it really shines when you reduce the paint more than you are used to and drop the air pressure.
just started using it to build a kit with and its spraying loverly
It's a really good brush for the money, but be warned, if you over reduce, which is what we're talking about here, you really have to go low on pressure and light as hell on the trigger. Especially if you work on hard surfaces like I do, as it will spider like crazy. The brush puts air out so soft and quietly that you may be pushing more air than you think. Learn to properly use that MAC valve.
@@airbrushdungeon Very true. Also very good for spraying some of the water based chrome paints like Mission Models, Createx Quicksilver,etc.
@@REKlaus Exactly.
I bought the GHAD-39 for less than $30 USD and it’s probably the best airbrush for its money ever. I just purchased the Morbius 2mm & 3mm yesterday and can’t wait to use them.
廠商在中國還未上市這噴筆
love my 3.0 gaahleri but i have to admit the mobius is a hell of a lot better
how or where did you get it? if you mind me not asking.
@@AdmiralKodai Which one? The GHAD-39 was on Amazon. The two Morbius were from their website.
Just picked up the GHAD-39 by Gaahleri I will definitely be purchasing the Mobius 0.2 looks a beautiful airbrush 👍
it is and i am going to be building a 1/48 fw190 with it for the camo scheme
It's one of those brushes that look like a piece of jewelry.
Cool
thanks 😀
That paint needs thinning.
這筆一定要高氣壓才噴出細線
its supposed to be ready to airbrush with no thinning needed
not the best paint but the colour range you can get from them is fantastic
🤩😍😛
cheers
Well the paint you used is horrible to test a airbrush you should have used Tamaya or mr.color paint and then you would see how amazing that airbrush is.
用Tamaya和Mr.color的水性漆可以,因這樣噴嘴不易塞槍
i try and make the reviews as fair as i can and will use good and bad paints to see how the airbrush compares
personally i am using more and more mr color paints now as they are fantastic
@@yorkshiremanmodelshowdy....quick question about using the blue tack sausage for masking....once you have the paint down do you remove the blue tack straight away or leave it....i leave it for the paint to dry and sometimes it works fine for me and other times i get a hard lip that i then have to carefully remove and touch up....im speaking as a brush painter....i do have an airbrush but don't use it yet as i don't have a dedicated modelling room.
Tnx👍
In my experience Tamiya paints are awful....tried them a few times and absloutley horrible covearage to to piont i will never use them again.....with the exception of the "clear" paints.
@jaws848 if you are telling me Tamaya paint are Awful, are you kidding me? There's like the best paint for beginners and for airbrushing. You don't know what you're talking about, dude, you did something wrong. I am never ever heard anybody say that Tamaya paints were bad you mix them 50/50 and spray them wow
Dont they sell black in that crummy brand of paint
They do but I don't have any
當然要😅😅😅,
thanks
Can you buy in the uk?
only place i have found upto now is to order direct on this link but they may become available on amazon at some point
the airbrush has only just been released so it may take a while for them to appear anywhere else
this is the link to the gaahleri website and store:
bit.ly/3txTqZn
And the 0.2 is sold out! 😮