Spindle Bearing Replacement for Cub Cadet LT 1024 with 50" deck
Vložit
- čas přidán 29. 08. 2024
- Replacing the damaged bearing on the Cub Cadet lawn tractor we use to mow around the farm. All prices referenced in the video were current to late summer 2022.
#smallengine #repairnotreplace #lawnmower #mechanic
Hi John, I have a Gt2544 Cub lawn tractor. I have the spindles out for a bearing change. In the past, when i have changed tapered berings on trailer axles, I tighten the castle nut and then back it off a quarter of a turn. On the mower spindle, when I insert the bearing to the race and install the seal, the bearing can slide back and forth about 3/16 of an inch. Does that sound right? Thanks for your help.
John, great video. I have one question; I have an older LT 1018 and I can't seem to be able to remove the bearing cups (races) from the spindle housing and I don't want to damage the inner housing. How did you remove yours?
I used the press in our garage/shop to both remove and install the bearings on this one. You can also use an air hammer or a punch and hammer with the spindle held in a vice. They can be tight and it's important to drive evenly to keep the races / cups straight in the bores.
Did you replace your race ?
Yes
Always best practice to replace cup and cones as pairs
Which way do you install the black plastic/rubber bearing seal? It is hard to tell from the parts manual.
Install with the seal lip and spring to the inside. The "pressure" will help hold the seal against the shaft and keep the grease inside.
HAVE A CUB CADE mn-103 48in have spindle fail ? 959 3665 where do get the parts