Speaker Wire Basics (Quick, Easy)
Vložit
- čas přidán 20. 07. 2024
- (Update 8/17/22)
Thanks to everyone who has been watching and commenting, its meant a lot. I am continuing to respond to questions. If you have ideas for another video please let me know. I would love to cover another subject that might be helpful to people.
**Links below are affiliate links and I may earn a commission at no extra cost to you***
16 Gauge wire:
amzn.to/38jk8dh
12 Gauge wire:
amzn.to/3MoIGAi
10 Gauge wire: Blue Jeans Cable - BJC Ten White (5T00UP)
amzn.to/3kdgrbY
(Preferred) Banana Plugs:
amzn.to/3vEPN0Y
(Cheaper) Banana Plugs :
amzn.to/3vcU3W9
Wire Strippers:
amzn.to/3K8vZYY
Timecodes
0:00 - Intro
0:36 - Pick the Right Home Speaker Wire
2:19 - Terminate or Make Ends for Your Home Speaker Wire
3:46 - Connecting Speaker Wire to Home Audio Equipment
My camera equipment I use
Canon M6 MKII
amzn.to/3rQUkvT
Viltrox Speedbooster
amzn.to/39hE296
Canon 50mm lens
amzn.to/3MrsdeP
Movo Wireless Mic
amzn.to/3K8wH8A
Lights
amzn.to/3kbv4fG - Věda a technologie
(Update 8/17/22)
Thanks to everyone who has been watching and commenting, its meant a lot. I am continuing to respond to questions. If you have ideas for another video please let me know. I would love to cover another subject that might be helpful to people.
So I have an antiquated system that doesn’t match up. The stereo is SoundDesign, model 6863 BKM and a pair of Panasonic model # SB - AK44 speakers. Not sure how to hook this up? The stereo has a record player on top so I can play vinyl. Please help as I have an old album that I really want to hear.
Sorry for the delay, let me look that up.
I didn’t know it was that easy to connect bare wire to a banana plug! Thanks for showing how simple it is!
Just wanna say that this was a super-helpful video! I am technology-deficient, but after watching this, I managed to connect my new eltax speakers to my new Luxman amplifier and my new Technics CD-player... -- and it all works! Nothing exploded! I can hear music! Thank you!
I don't know how I missed this comment but thank you so much!
Wow , nice work! Leaps and bounds over last one!!! Somebody gave me a whole bunch of the see thru wire!! 🔈🔉🔊
Dude, this was the cleares video I have seen the whole day, and believe me, I have seen sh#t ton of videos to set up my sound system. Keep it up bruh.
Glad it helped!
Thank you so much for producing a video that is efficient and helpful from beginning to end. I can't stand video tutorials where the first minute and a half consist of the creator explaining what the video is about (that's what titles are for).
Thank you! That was definitely a goal, make it useful and to the point.
😂 "because i hate them" caught me off guard
Same 😂 im dead that’s what was already hooked up in the house I just moved into lol
I appreciate you putting this together. Very practical and useful information!
Very welcome, thanks for watching!
gotta love the honesty about the transparents
Super clean format for your channel, deserves 100 times the Subs it has good luck to you and your channel
Thanks man!
Great video my friend! Nice simple but practical information for those out there that are just getting into this hobby.
Love the editing!
Thanks! I had a friend tell me ( non audiophile) that the last video they started but couldn't finish because they didn't understand all the terms. Felt like I should do something that was more inclusive. Appreciate you watching and commenting!
This is an excellent straight forward video, thank you.
Thank you, you're very welcome! Appreciate you taking the time to comment!
Excellent! Easy to follow!
I like the presentation result from turning the completed join.
Haven't see that before, and it was really helpful.
Glad you enjoyed it!
Thank you for the video! Helped a lot
Very welcome!
Awesome info! Thank you!😊
Hey, just a thank you from another internet stranger getting into his first home theater system. 😁 Thank you for being funny and helpful.
I appreciate you for taking the time to let me know it was appreciated!
Thank you for the simple instructions!
Very welcome!
Great vid, thank you.
Thanks for the work mate! This video was very helpful
cheers n take care
Very welcome!
This is a snazzy lil video. Thank you!
Hahaha, thanks Kim!
WOW, THANKS SO MUCH...I FIXED MY CONNECTION THANKS TO YOUR TUTORIAL, THE BLIND COLOR EXAMPLE WAS HELPFUL TOO.
That is awesome! So glad I could help!
Thank you so much for powerful skills. 👋🤗
Excellent video, thank you.
Thank you so much. Appreciate you watching and commenting!
Thank you so much for your help.
Very welcome!
I thought that was you Aaron, nice video! Who would’ve known I’d see an old friend making a video that I needed.
Hahaha, your very welcome!
Good to hear from you Steve.
Thank you for this video as a home theater novice this was extremely helpful and well put together. I know a comment is good for your youtube points so here is my comment :) Thanks again
You're very welcome!
Thanks for commenting!
That was extremely helpful
Glad to hear it and thanks for commenting!
I have 3 motorola 40 year old speakers in a box that work great with my stereo. I would like to add red & black wires to the seven strand leads. If I disconnect my Sennheiser wireless headphones from Wiistar digital audio decoder to analog & plug in the speakers in with red & black leads attached will this work ok? The headphone is plugged into the wall. Do I need & adapter or something else attached to my old speakers to make it work with my tv?
Amazing video. Thank you so much! Maybe one day I'll be an expert like you haha 😂
Very welcome! Thanks for watching!
Great video mate
Thanks!
My receiver only has a right and a left output place but my speakers have a positive and negative (red and black but do I take the three prong wire .I put the red in right speaker white in left and the wires to my speakers the other end I put the red wire to my right speaker and ran a yellow wire from the negative on the speaker to the negative on the left speaker and the white wire I put in the positive for the left speaker is that correct
Cursing 😂 great video with great commentary.
What amplifier should I get to receive 5 speakers and sub wolfer? Thanks to anyone who responds
Ok I'll do that..thanks
Thanks for the video. One question. My IPAO says that some speakers are out of phase, but i am sure the wires are correctly connected. Should I change the wires or leave them as they are?
I would go ahead and try changing it and see what happens. You won't hurt the speakers having them out of phase it should just sound weird. I have made the mistake many times so good to try. One thing to try as well is to confirm that you are connecting to the right speaker. Un hook all the other speakers on the amp side if you are still getting the out of phase error. Some times we start looking at the wrong connection cause it's hard to see and confusing. I've done that too.
Which wire should I buy for outdoor pool area?
You da man, Aaron! Thx
Thanks man!
Im thinking of making of making my own diy premium speaker wire for a SVS 5.1 system. Can I twist two 14 gauge wire for the neg and two 14 guage for the positive. I plan on using Monoprice Access Series 14AWG CL2 Rated 4-Conductor Speaker Wire. Will this be to thick to run to my satellite speakers? The longest run is 20' to 25' (rears) 3' to 6' (fronts). Any response is appreciated - Thanks
Absolutely, it would be thick enough. To be fair, you could use one positive and negative of 14 AWG to go all the lengths you mentioned. In the thumbnail of the video there is some grey speaker wire. That wire is 4 conductor 14 AWG wire that I combined together (red and red, black and black) to make a single connection wire (I use that for my front speakers that are only about 12 foot runs). It turns out to be about 11 AWG wire. I like it because it makes me feel confident about things working but functionally, all you need would be the 14 AWG. Let me know if you have any other questions. Thanks for watching!
How To Connect Speakers to Receiver with Wire-Ultimate Solution
A cable used to connect amplifiers to speakers is known as speaker wire. The audio is amplified and sent to the speakers via this cable. It has a copper core that can be stranded or solid, as well as a PVC jacket that protects the core from interference and other external influences. This blog is for those people who online often ask how to connect speakers to receiver with wire. The core is usually stranded, which means it’s made up of a collection of tiny wires that are twisted together to make a larger (thicker) conductor. There are a couple of reasons behind this. For starters, a solid conductor makes the wire far less flexible, making installation more difficult. More importantly, solid conductors have a greater skin effect, which increases resistance and power losses, both of which we want to minimize.
Terminals of the speaker
Speaker cables are connected to terminals on the back of most stereo receivers, amplifiers, and conventional speakers. Spring clips or binding posts are the two types of terminals available. For simple identification, these terminals are almost always color-coded: the positive terminal (+) is usually red, while the negative terminal (-) is usually black. Some speakers are bi-wire capable, meaning the red and black terminals are sold in pairs for a total of four connections.
Connectors
Most speaker cables are bare that’s why you’ll need a wire stripper to expose the strands at the ends. Whether your equipment uses spring clips or binding posts, tightly twist the bare wire strands so that they stay together as a clean single twisted wire.
For more detailed articles/blogs please visit: smartelectrohub.com/speakers/how-to-connect-speakers-to-receiver-with-wire/
For more detailed articles/blogs please visit: smartelectrohub.com/
Great video! It was clear and easy to understand. I appreciate it. My one question: what is the benefit of putting the wire and plugs together oneself rather than buying pre-assembled wires with plugs already attached?
There can be two benefits. Some times it can be cheaper (not always) and you can do custom lengths. If you have a budget for it you can go for the pre made wires.
@@goldenearaudioreview4904 thank you!
This video help me soo much.
Totally glad that helped!
Thanks for the video - what if I have 4 conductor speaker wire? How would I connect them to a banana plug?
If you combine two of the sets on either end ( making sure your consistent) you can increase your wire gauge. I would just make sure you label the wire ends with positive and negative and that needs to be identical on the amp end as well.
hello, my speakers have a little color coated cap inside then wire terminal that prevents me from plugging in my banana plug, however, it otherwise appears to be fully capable of accepting a banana plug input. So do I need to remove these caps? I tried a little and they were quite tightly on there, so I figured I would ask first. Also I am working with the celestion F1 speakers. I tried a search for the user manual but could not find one online. Any help is greatly appreciated thank you.
Hey, sorry for the delay, many products that get shipped globally come with those extra inserts in the banana plug hole. I used a dry wall screw and a drill and drilled just a little ways in and then you can pull those caps out. If it is what I think it is.
i learnt something new with banana plugs
Damn that intro music 👌
Question: I have a Jeep Wrangler with a subwoofer in the back with blinding posts. I like taking my top off and so there's a higher chance of rain getting in. Is there a way to "waterproof" the connection at the blinding posts? Maybe use some black electrical tape?
Are we talking if it starts raining briefly on a sunny day? Or do you regularly go out while it's raining? If just the first one then I'm guessing just some electrical tape would work. I would make sure you've covered both sides of the connection and make sure there isn't a place for the water to collect. If I was extra cautious I might add some air tight housing over the connection as well.
@@goldenearaudioreview4904 The 1st one haha. I make it a point NOT to go out driving on rainy days with my top off. Thanks for your input. So adding electrical tape over the wires wouldn't interrupt or hinder the electrical connections in any way?
Nope, as long as it's not blocking the path and there is a good metal to metal connection it should be fine.
Nice video. The speaker insertion on my mini-shelf stero is a square design with springs behind the clip. Didn't see this style in your video. I have 14 awg wire. It's bare copper wire no connectors on the end. think it started off as a 25 ft. roll. After I had the wires cut to length and twisted the copper strands together the wire was almost to thick for the insertion hole on the stero. Would you suggest I goto 18 awg speaker wire or use crimp on connectors for the 14 awg wire I have now?
Good question! I have used pin connectors but they always seemed to loosen over time. Bare wire is good, might go with a 16 awg. I would avoid 18 if you can.
@@goldenearaudioreview4904 Thanks for the response
Few questions for exposed wire. Does the exposed wire have to go all the way through the hole and out.the other side?
When I tighten the post...do I tighten it over the exposed wire or the insulation?
Lastly, when I put the exposed wire through the hole...and its a little long on the other end...do I wrap the excess amount around the post before I tighten or just cut it?
If you can cut it the same length of the hole that is good. It should be fine if a little is poking out the other side. Some guys do wrap the excess around the pillar to make it harder to come loose. What you want to avoid is any stray wire making contact with anything else besides the binding post. Especially if it is conductive.
You want the wire directly touching the post and little to no insulation touching it but keeping in mind you don't want to cut the insulation too much as to accidentally have the wire come into contact with anything else. Thanks for watching and commenting. Let me know if you have any other questions.
Metal to metal for the wire and binding post.
Thank you very much for your detailed replies. I really appreciate it. :)
Can you show me what kind of wire to connect amplifier to EV ELX 200-10 speaker. Thanks
Can I use this one Rockville RTSBW15 15 Foot 1/4" TS to Bare Wire Speaker Cable,16 AWG,100% Copper
Hey thanks for the video, but I have a doubt.. my banana plug doesn’t go fully in to the speaker terminals … 3/4 th goes inside because of smaller speaker terminals… does it compromise on the out put ???
No, that sounds about right. As long as they are making a good connection (not loose and barely touching sides) then it should be fine. Some of mine fit the same way.
Excellent video. I have one question. Are the banana plugs the same thing as a 3.5 mm audio jack?
Thanks! Good question, no, they are not. They do look similar but the 3.5 (and the larger 1/4) jack have rings on them that can carry stereo information. Banana plugs don't have that. They are also a different size with the banana plugs having a spring like tension to them to keep them inserted in the binding post. Thanks for asking the question!
@@goldenearaudioreview4904 Oh ok. Are there audio jacks i can buy that are 3.5 mm that i can hook up the red and black wire to. Thank you for the assistance btw. Just subbed 👍
@@johnnyboy_rn4l_826 Sorry I missed this question. You have undoubtedly found your own answer but here is an example of something like what you are talking about. www.amazon.com/CERRXIAN-Terminal-Headphone-Converter-Adapter/dp/B06Y5YJRPD/ref=asc_df_B06Y5YJRPD/?tag=hyprod-20&linkCode=df0&hvadid=193992629021&hvpos=&hvnetw=g&hvrand=17653091454944598486&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033382&hvtargid=pla-313747042489&psc=1
Thanks for video, very informative. Remark: better lighting would improve the quality of your production. Greetings from Brussels.
Hey, thanks for commenting. I think I improved the lighting in later video's. Certainly learning a lot as I go. Take a look and let me know.
Im still wondering if i hooked it up ok
how to connect regular speaker cable to 3pin xlr? because usually speaker cable has plus and minius only. not ground.
I googled "speaker wire to xlr adapter" on Amazon and found some options. I noticed that quite a few people were saying it didn't work but I'm not sure of their scenario. Male vs female xlr and which side needs the XLR vs speaker wire. Not sure if that helps.
Im new to all this but i really dont understand why i have to do all this stuff on my own why cant i just buy the wires already set up into the banana plugs. Can i use the male to male RCA cables that are red and white?
No, the RCA cables are not compatible. You can buy premade wires with ends. Check out my description
You make it look so easy and it is easy...but my question is the top part of my plugs do not connect the bottom parts..I mean there's not a complete connect and closing of my banana plugs and cables. It will works but what else can I and should do
Hmm, I am trying to think of the scenario you are talking about but I can't picture it. Can you give me some more details? Are you saying the banana plugs don't connect to the binding post in a normal way?
hi is it better to use passive speakers or powered speakers alone. im using separates cd player and amp. just need the right speakers
Either can be excellent but they have trade offs. If it's all in one you don't have the same flexibility but it could be a really great value and simple to use. If the self powered speakers die then you're out the whole system until it's fixed or replaced.
I am a complete moron when it comes to electronics. I used masking tape to label all wires as I pulled them out from my old receiver and of course when I tried wiring the new receiver, all of the wires were stuck together in a huge ball of masking tape so I doubt I got all the wires correctly installed.
I ended up using a 9V battery to get the "popping" sound and make sure the correct wires were connected to the right posts.
Now I am not sure if the polarity is correct as all of the wires were black.
I've seen where you watch the speaker go in or out to determine correct polarity but I don't want to remove the cover to do that test. Any ideas???
Alot of receivers have a speaker setup option in the menu. It will play sound through each speaker and often check for polarity. If it came with a setup mic there is a good chance it has this feature.
Thank you for clear and concise instructions that even a moron like me can understand.👍
Very welcome!
I have an old Pioneer stereo I want to use the speakers going through my Poweramp is that possible
Possibly, depends on if that Pioneer has pre outs. Should be RCA connections on the back of the receiver. You could Google the model and look up the old manual.
Hi there how do I connect four coloured speaker wires black red white blue to red and black terminal on the amp please? Can I put two wires together in red or black terminal? Thank you.
Yes, you can use any color and combine wires together. The trick is to make sure that it's connected the same at both ends of the wire. The negative on the amp is the same as the negative on the speaker and so on.
@@goldenearaudioreview4904 thank you so much for the speedy reply. I will do that. Thanks again. Appreciated. Stay safe
Thanks for this video, very beautifully explained. I have a related question, bought this property and it has in wall speakers installed in the family room (a total of 5). I want to hook up speakers to my tv.
Question
1. What components do I need?
2 How do I connect that component to my TV
You need a 5.1 receiver, ideally one with HDMI connections on the back. Typically you go, Roku/DVD player - receiver - Tv. So the receiver in the middle pulls the sound and then passes video along to the TV. You would need HDMI cables to hook up any inputs and then to the TV and then speaker wire from the receiver to the speakers. In your case I am assuming there is wire already run to the in wall speakers and there is a wall plate somewhere with speaker wire connectors to connect to the already connected speakers.
@@goldenearaudioreview4904 thanks
One of the best videos on the topic! The only problem is that I have clear covering (which you hate!) and I can't see which of them are negative and positive (unlike your clear red and black wires)?
Thanks! In the case where you can't tell, choose one side and mark it with a marker. Assuming you can see any difference between the two. If you can't tell at all, I would separate them and then mark them with a permanent marker.
The wires aren't physically different so it won't matter which side you use as long as it is consistent from end to end.
@@goldenearaudioreview4904 Thanks for quick reply, that makes sense! I will do that as I have a vintage stereo system to hook up this week!
I’m learning how to fix stuff myself instead of saying it’s broke I’m fixing the inside of my speaker and charging input I ain’t got nothing else to do
bear in mind in most European countries, the standard mains power receptacle will physically accept banana and even US-style "double banana" plugs leading to a risk of electrical shock. For this reason, throughout the European Union, the sale of audio amplifiers and loudspeakers that accept banana plugs is prohibited as is the sale of loudspeaker leads terminated in such plugs. The UK was included in the prohibition even though such mains sockets were not used there.
I didn't know that! Thanks for letting me know.
it's simply not true, banana plugs are not regulated in EU
I just got the Elac Debut 2.0 B6.2, and I can't connect them with banana plugs. I have the nakamichi banana plugs.
I know those speakers have the holes for banana plugs. Are the banana plugs to big to fit in the hole or the case to big and there isn't enough clearance around the posts? Did you buy them in the US or outside the US? Some countries require caps that cover the banana plug holes on the posts.
One ? I have sony bookshelf speakers sscs5 and a sony Bluetooth stero receiver the STRDH190 The speakers have connections for banana clips the receiver don't can is it possible to use banana clips on the receiver STRDH190 ? not sure how to hook up my system had it 2 weeks now can't wait to use please help
You wont be able to use the banana plugs on the reciever but you could use pins. I don't really care for pins as I have found they tend to come loose. You could get some bare wire and do banana plugs to the speakers and bare wire on the other side of the wire to the receiver. That is what I would probably do. Bare wire is maybe the best connection (no audible difference) from a conductivity view point but it's not very convenient.
@@goldenearaudioreview4904 Thanks Brother or Sister I'll do that
My Denon X1600H doesn’t have a hole in the terminal. How do I connect bare wire to it?
I like to twist the wire so it's nice a tight and the make a hook with it. Wrap the hook around the terminal.
I inherited my dad's Fisher quadraphonic from 1974. On the back of the receiver it's just standard Flathead screws the red wire would connect to the silver screw heads and the black wire connects to the dark gray screw heads. The speakers are just like spring plugs we just push the button and the hole appears. I want to know the best way to connect speaker wires to the stereo is dad is unable to help me.
That sounds like an awesome kit! Your best bet in this case would be to use bare wire. On the receiver side I would make a hook with the wire, it's best that the hook go in the direction that the screw turns. For the spring clips on the speakers, I would give the ends a twist and insert. There isn't a standard hole size for spring clips so I can't recommend a specific connector for them. The wire will be a good connection as long as you're not unplugging and connecting the wire again a bunch.
You should use “ spade” connectors,the blue ones
Hi, nice video. Care to explain why you hate transparent cables?
The reason I don't like them is because I'm color deficient and the transparent material is harder to see the color against. Thanks for watching and commenting!
thanks for your reply@@goldenearaudioreview4904
My speaker wires are thick to fit in the new Onkyo TX SR393 .. what to do
It looks like for the front left and right, you can use the bare wire or banana plugs. For the others, you can see if pins will work. What gauge wire do you have?
Hey I have a question what does the other end of the wire your not showing in the video look like how the hell do you plug them into the speakers???? Also do different speakers have different plugs as well and would I need different wire then. I tried cutting the end off a black and white plug in audio cable and it didn’t work at all
Speaker wire should look identical on both ends of the cable: beginning and end of the cable. Almost all speakers for home use will accept bare wire connections (self powered and pro audio speakers being the most common exceptions). In the video I go over the most common connectors and connections.
I would suggest using speaker wire bought from a store or online rather than making your own wire.
Thank you......
Very welcome!
I’m build something from scratch I got to find a certain place to get this stuff I’m thinking I might have to order it
There are a bunch of sites you can order speakers from. Madisound is one that I like.
This may be a stupid question lol but can u put banana plugs in those ports u have to press down to open?
Not a stupid question. Most of the time they are too big to put in the spring clip posts. They do make a pin connector type and that is more convenient but also I have found that the pin connector type is really unreliable. I just used the cheap kind and that has been my experience.
If the distance from the receiver is different for each speaker would it be worth it to use different gauge wire for each one, for example one speaker is 5 ft. from the receiver, and the other one is 12 ft. away would using different gauge wire be practical or not? Thanks! Your video was really easy to understand.
Glad it was helpful! You are probably fine the way you have it. I think if you were worried about it, I would use the same gauge but make them both the same length (assuming it won't have to just be a coil of 7 ft next to the speaker? If it can snake a bit more then I would do that). Gauge size probably won't make any difference assuming you are using at least 16 gauge wire. I am personally using some belden 10 gauge wire to go about 10 ft which is completely overkill.
Appreciate it
Very welcome!
Question from a complete not so sure newbie....I've got my speakers, got my amp and pre amp, got my subwoofer, I even got some monoprice banana blugs (they were donated to me) but I want to ask you which cables should I get? Should I get the cables that you recommend and use for all the connections, or do I need to order different cables, and or wires? And don't they offer cables with the plugs already connected? Any help would be much appreciated.
A great cable company that makes really great cables that aren't way over priced is Blue Jeans Cables. They make all the different cables you would need.
@@goldenearaudioreview4904 Thank you but I have already ordered from GearIT...if these don't work out, I'll look at Blue Jeans because the prices are more than right for what I'm building.
On the Sony sscs5 I lost one of the screw on terminals. Can I work around it or try to replace with a different type of terminal?
Is it just the outer portion? Cause if it still has the center hole you might be able to use banana plugs to connect. Not sure about how to repair it
@@goldenearaudioreview4904 nope the whole got unscrewed completely. I was thinking about soldering the wire on to it lol
Thank you!
Welcome!
Sounds like you think having a PVC cover on wire makes it shielded. Shielding is an internal wrap that provides an protective ground to prevent interference. I know you know this, just wasn't said.
Hello, I have a question you may be able to answer I bought a house with ceiling speaker, only two wires coming out of the wall each wore has 4 different colors like in your post picture, what do they all mean?
How many in-ceiling speakers are there? Is it 2 cables and 4 wires in each or 2 cables with 2 wires in each? Depending on the colors and amount of wires and speakers you may need to experiment with how you connect them. Let me know more and I might be able to help you narrow it down.
@@goldenearaudioreview4904 thank you for the reply, two in the living room, one in the kitchen, bedroom, front porch and back porch, with volume controls. two cables with 4 wires in each 16/4 I believe
@@jean-pierredoucet8328 if they aren't labeled then you will have test each combo and then label each pair. You need to connect two wires, one to each binding post for one speaker. I use label zip ties and write the location for the speaker. Test connecting the speakers at low volumes using an amplifier, stereo or home theater receiver.
You don't have to test with all three types of amplifier, just one would be fine. Let me know if you need more information.
Can connect the spring clip speakers to Bluetooth receiver
Bluetooth speakers typically are wireless devices. You need to have speaker terminals on both sides (speaker and amp) to make the connection. Either the speaker has Bluetooth connection and a built in amp (power) or it's a passive speaker and it needs an amp. Some receivers have both Bluetooth and speaker terminals.
I hope you can help me. I want to put banana plugs on but I have no ideal what to get.I have a Onko HT R 510 home theatre receiver. Thank you so much.
Mary
Hi Mary, sorry for the wait, let me do some digging
Ok, that receiver uses 5 way binding posts so you can use the links in my description for wire and banana plugs. All Amazon links.
@@goldenearaudioreview4904 Thank you, where are the links?
Could you tell me what size banana plugs? Also is there something inside the terminal posts that need to be removed so the banana plug will fit. Thank you
They are all the same standard size. To remove the covers ( plastic bits that fit in the center) I used a dry wall screw and screwed it in the the plastic but, just a little, and then used that as a handle to pull it out. You can look that up on CZcams, that's where I found the idea. There might be better ways of doing that.
don't know if you're still answering questions or not, but I have a rather stupid question for myself lol. Say I bought a 100 ft of Speaker Wire, but I only need 50 for the connection. Can I cut it half (two 50ft speaker wires out of one 100ft speaker wire) and with stripping it on both ends, can I use the two wires the exact same? or would it destroy the wire itself if I cut the copper between them, even if I strip new ends and beginnings on each side?
Still answering questions! If you are cutting the wire across both the positive and negative cables then yes. That is absolutely how speaker wire works. If you are trying to double your length by separating the two cables then no. If I have a hundred feet of wire and I have two speakers I need to hook up that are both 50 feet away then cutting the wire in half is exactly what you would do. If you are actually in a scenario where your speaker is 50 feet away I would use 12 gauge wire or larger (like 10 awg).
But, you can probably get by with smaller wire. It will work, it just may not be the most optimal.
@@goldenearaudioreview4904 ok good lol, glad it works that way! I’m getting the Klipsch Dolby Atmos 5.1.4 Home Theater Package and my 2 back speakers are def gonna require more than the 25ft 14 gauge wire they provide lol, and it seems buying one 100 14 gauge wire pack can be cheaper than 2 50ft’s in some cases lol
Thank you for the quick reply as well! ❤️
thanks, man, really helpful!
Very welcome! Thanks for watching and commenting!
how do i connect to the speaker if it is a spring clamp thing
You can use bare wire or pin connectors. Probably better to just use bare wire as the pin connectors tend to lose their crimp on the wire and wiggle free from that end.
Hope that is helpful, let me know if you have more questions. Thanks for watching!
Hey man... I'm tryna connect firestick to hdmi2va 1.(to av receiver to speaker) and 2.(to my TV). Could you help me?
Sure! I think the normal way to do this would be to plug the Firestick into the HDMI in on the receiver. That should give audio and video at the same time to the receiver. It should then pass the video up to the TV through the HDMI out. Maybe you have already tried that or you have an older receiver?
@@goldenearaudioreview4904 thanks for the reply. Could you help over on Instagram or snapchat? It'll be easier to explain and show you. Is that possible?
So my problem is : attach the firestick to hdmi2av.. Hdmi2av got two audio connections and one video.. Two audio connected to amplifier.. One video connected to plasma tv.. Home theater speakers connected to amplifier. Will this work?
What is the make and model of the av receiver?
KAXTANG New Series DJ Remix Amplifier 1002 Modify Upgraded Version Bluetooth Full Black Digital Stereo Amplifier BT/USB//SD Card/FM/AUX 60 W AV Power Amplifier 60 W AV Power Amplifier (Black).... Google this
When there is a red, and a black wire- is the red the hot? Thanks- very basic, but not mentioned
Hi Norman, red is usually the hot and black the neutral. Honestly though, I think in most scenarios you just have to match colors and keep them consistent.
Oi mate !!! I’m 43 years old never handled this complex wiring before thanks for making it simple an easy to learn !!!
“bc I hate them” I’ve said that killing isis !!!
Hahahha !!! You and me are the same mate !!!
Glad I could help!
I just recently changed from raw to banana plugs and one speaker works great but the other now doesn't work properly. The audio is barely audible. I switched back to raw for that speaker and now it does the same thing.
Before I used banana plugs I was raw for both speakers. The speaker that doesn't work properly right now was always sorta lower audio than the other but now it's almost completely gone.
I don't know if it's the speaker itself or my Yamaha CRX-E300.
Please help...
It's pretty common to miss wire things but the best way to check is to swap cables and speakers. Put the left speaker on the right and so on. If the sound issue follows then what ever you changed may be the issue. Do one change at a time so you know what has caused the issue.
My speaker came off of a radio an it had six wires what do I do, should I still run black wire to black wire an red to red or what
Six to each speaker or six total? I'm assuming you have two separate speakers
@@goldenearaudioreview4904 yes two speakers that have six wires an I'm trying to connect them to presonus Eris 3.5 speakers the two I'm trying to connect came from an onn. 100w radio
Instructions unclear i ended up making a ied
Hahaha 🤣
Can these wires be connected to your tv?
Most TVs don't have an amp for speakers externally.
I got an idea but ima keep it o myself 😮
Best of luck!
Can i connect the speaker direct to the tv..?
As long as the speakers are self powered (like studio monitors) or the TV has speaker terminals (which is not normal). Likely if you are using regular speakers then you would need a receiver.
Ryan Reynolds of tech
Hahahaha, I will tell my wife. Maybe it will earn me some points
What about those holes with tabs?
Ah, yeah, those are called spring clips. You should use bare wire. Typically you would want to use 16 gauge wire for that since it can be harder to thread. Or you can use pin connectors. They are similar to banana plugs but have a small pin instead. I have used them in the past but the wire tends to wiggle free. Easiest, cheapest is bare wire.
Just push the tab down and insert the bare wire in. You may need to experiment with the length of exposed wire to insert in but I would start with about a half inch.
Yeah, in my experience they were the least reliable. The wire would eventually slip out if they got moved or re inserted. Better off with bare wire if you can.
Thnks Edward Snowden.
Hahaha