To effectively perform electrical diagnostics and troubleshooting, follow these steps: 1. Gather information about the equipment and its operation. 2. Understand the malfunction and identify parameters to evaluate. 3. Identify the source of the problem and correct/repair the component. 4. Verify the repair and perform root cause analysis. 5. Check for common electrical faults like bad capacitors or seized motors. 6. Use troubleshooting techniques like analyzing circuit behavior and reading circuit diagrams. 7. Remember that completing the electrical circuit is essential for it to function properly.
GREAT! always helpful to enforce Logic, even if what testing is not so advanced. *Thanks!* *BRP:* Bad Representative Protocol lol 🇺🇸 ALL *Governments actually have such a system,* the people just *Need to Use this process* to FIX Causes to their Faults.
I have got to the stage of isolating the circuit but I have had two different electricians in that cannot diagnose the problem. They know the faulty circuit but they don’t know why it is tripping the fuse. It only happens when it rains heavily.
@@brptraininginstitute8878 actually smelling comes in handy for diagnosing many automotive problems . Especially electrical with hot wiring and alternator's going bad . Video gave great diagnostic process .
@@brptraininginstitute8878 if anything gets hot enough it can have a unique smell . The rear axle seal went bad in my car and believe me that is a unique stinking smell . That and burnt automatic transmission fluid .
Customer- Ah no thanks since you just spent 4hrs diagnosing my problem I think ill just fix it myself to save some money 🤣🤣
😂😂😂
Guilty
Thanks, great video on Electrical Diagnostics
Happy New year 🎉 How to electrical diagnostics and troubleshooting
Helpful video thank you 👍 👏
From Nick Ayivor from London England UK 🇬🇧
Nice job 🎉
Very useful video keep it up sir
Sultan Sikander khan Very good information, great refresher
Thanks for the knowledge
Very good information, great refresher
Thanks.good job👍
Thanks Again Very useful Video
Very well explained sir. But does a power balancing procedure make it easy? No hate I just wanna ask
These methods are great. As a professional audio technician n training id love to shove this video my bosses face. Process of elimination.
Tanks,great video
The ain't got noses! Nice swaptronic vid legit.
What kind of diagnostic tool is used which is shown in this video?
It was great, please put more tutorials on the channel❤️🙏
Good luck and also dear friends
Well explained
I love the video
I can’t find that T-Harness anywhere on the internet. Assume you have to build it yourself?
Thanks 🙏 👍
hi, I would like to know if you have online training course for auto electrical ?
Thnks❤
Very good
To effectively perform electrical diagnostics and troubleshooting, follow these steps:
1. Gather information about the equipment and its operation.
2. Understand the malfunction and identify parameters to evaluate.
3. Identify the source of the problem and correct/repair the component.
4. Verify the repair and perform root cause analysis.
5. Check for common electrical faults like bad capacitors or seized motors.
6. Use troubleshooting techniques like analyzing circuit behavior and reading circuit diagrams.
7. Remember that completing the electrical circuit is essential for it to function properly.
Been seeing a lot of motorcycle wiring get rubbed through to the frame (somewhere) lately.
Very common, especially on older bikes.
GREAT! always helpful to enforce Logic, even if what testing is not so advanced. *Thanks!*
*BRP:* Bad Representative Protocol lol 🇺🇸
ALL *Governments actually have such a system,* the people just *Need to Use this process* to FIX Causes to their Faults.
❤❤❤❤❤❤❤❤
Very good information
❤❤❤
I have got to the stage of isolating the circuit but I have had two different electricians in that cannot diagnose the problem. They know the faulty circuit but they don’t know why it is tripping the fuse.
It only happens when it rains heavily.
Bad insulation most probably
Might have standing water causing a short to ground or corrosion. There’s a leak or waters getting in the body panels somewhere
👍👍
Dear sir more videos post youtube car engine electric ECU wiring training
I diagnose the missing noses
@@brptraininginstitute8878 actually smelling comes in handy for diagnosing many automotive problems . Especially electrical with hot wiring and alternator's going bad . Video gave great diagnostic process .
@@brptraininginstitute8878 if anything gets hot enough it can have a unique smell . The rear axle seal went bad in my car and believe me that is a unique stinking smell . That and burnt automatic transmission fluid .
@@Viper81766❤
😂😂😂
Simple and Effective
❤❤❤❤❤
Don’t think just because the check engine light is not on that there are no stored codes
Comment vous contacter
If a technician needs to look up how to replace an ignition coil then he shouldn't be a technician.
im surprised people actually buy BRP rubbish
Most Car repair shops, will add and declare good working parts as faulty, to charge customers extra amount.
But you used cartoons as practical
z
Ford = loose or blown out spark plug just saying
I smell something fishy. 😂
Y
H gh
Lose the irritating crappy music.
OMG what a waste of time.
I will save you 15 minutes, read the fault,verify the fault repair the fault, smile at customer.
Merry Christmas
Well explained