RC ERA C189 MD500 Helicopter Crash Repair Main Drive Gear Replacement
Vložit
- čas přidán 18. 02. 2024
- Crashed on maiden flight. Heads up, there are no local replacement parts available so be patient as they ship from China.
Damage assessment:
- Main drive gear cogs melted
- Front light connector housing torn off
- Cracked battery housing
Bro got me hooked!!! @mikeylikesrc
Remember to slow things down, take that sacred pause and enjoy life!
Mark
Items used in the video and the transmitter I use to fly my RC aircraft. Please help support my channel by purchasing from the commissions earned links at no additional cost to you.
RC ERA C189 MD500 Helicopter RTF:
amzn.to/48jtfUQ
GLUE: Bob Smith Industries Maxi-Cure Extra Thick CA (BSI-113)
amzn.to/3up74i3
WORK MAT: Silicone, Magnetic and Heat Resistant
amzn.to/3T57WAP
TWEEZER: Megacast Non Locking Tweezer
amzn.to/4bLFf4q
TRANSMITTER: RadioMaster TX16S Mark II 4-in-1 V4 Mode 2 (M2)
amzn.to/4884eeZ
[As an Amazon Associate I earn from qualifying purchases. Additionally, I’m not sponsored by any of the products. Thank you!]
Non-associate link:
MAIN GEAR: from RCGoing
www.rcgoing.com/rc-era-c189-r... - Zábava
Thanks for uploading ....now I know how to open to access the mechanics.
My pleasure @fklotaloi. Thanks for watching! Mark
cool - great work!
Thank you @Powershotknect!
It lives!
Awesome news Outcast247! So happy she’s flyin’. Enjoy, Mark
love the heli! wonderful and explained review! This review is worth 1000 times more than the youtubers promoting these helis raving about them, but not giving detailed specifications... is it possible to connect an independent receiver and variator? like a flysky?
Do you think the heli ESC will last more than 50 flights without burning out or failing?
greetings
Hey thanks for visiting Mickey RC and thanks for the props. I’m a newbie to RC and this was my first helicopter so I am not the right person to ask. Sorry. I wish I had better luck receiving a working helicopter from Banggood instead of a defective and unsafe one 😢. Always wishing others have good luck with theirs🤞🏽. Thanks again, Mark
Thank you for the video, I need to make the same repairs due to the fly away issue and that's another issue I have to address later. I'm having an issue getting the two halves apart on the tail boom. Feels like it's glued but yours just popped off no problem. Maybe I have to man handle it or find a tool to pry open. I just don't want to damage it further.
Sorry to hear about your fly away 😢 I had to remove 2 screws on tail boom closest to the fuselage and 2 screws holding the rudder/horizontal stabilizer onto the tail boom. After that, it separated nicely. Hoping your repair goes well.
what is best way to take off the trial rotor blade. I think I can use needle nose plieurs to hold it to remove the screw.the screw is stuck.I want to replace the rotor blade with the yellow tip blade .I try to but it didnt work. I will leave it alone.
Yes. Hold the rotor blade and prevent it from spinning while removing the screw. I hope it’s not stripped. 🙏🏽
I'm working on replacing the drive gear right now. I crashed and it broke the gear and screw. I had to look at your video to see how the exhaust pipe fits in. I think I was doing it backwards. Where did you get the cap screw or did you reuse the one that was in it. I bought a screw kit but it didn't have a cap screw.
Hi J Wood! Sorry about your crash. Yeah, I initially put in the exhaust piece backwards but fixed it because the 2 halves wouldn’t align correctly. The exhaust piece simply rests in the grooves. Good luck on your repair and hoping your helicopter flies again! 😊, Mark
@emem1613 Yeah, I lost too much altitude on a high speed turn. I did get it fixed today, and it Flys. Thanks.
@@jwood9349 Woohoo 🙌🏽. Keep on flyin’! 😊, Mark
Anyone know what scale the fuselage is ...?thinking of fitting on other model....
Thanks for visiting Mike. The box shows 1:28 scale. Hope this helps, Mark
Động cơ chính có thông số như thế nào vậy bạn, kích thước và KV, xin cám ơn!
Hello Oimahhuong2307. I got this info from where I purchased it last year. I’m a newbie to RC helicopters with this being my first. I have since transitioned to RC planes. Hope the below helps. Thanks for visiting 🙏🏽, Mark
Specifications: Brand: RC ERA Material: PA/PC Scale: 1:28 Color Options: Camouflage / Red / Green / Black Applicable Age: Over 14 years old Rotor Diameter: 320mm Fuselage Length: 335mm Fuselage Height: 126mm Flight Time: About 15-16 minutes Battery Capacity: 7.4V lithium battery Remote Control Battery: 4*1.5AA (not included) Charging Time: Approximately 90 minutes Remote Control Distance: 150-200 meters Box Dimensions (mm): 460X230X120mm Flight Weights: 225g Packaging: Colored Box + Blister Pack Remote Control Mode: 2.4G Remote Control Drive Motor Quantity: Two Brushless Motors Features: Flybarless design with aerodynamic principles for robust power and stability. 6-channel variable pitch structure combined with a 6-axis gyroscope ensures super stable flights. Dual brushless motors provide potent power, longer outdoor wind resistance, and longevity. Pressure altitude hold with optional optical flow positioning guarantees a stable flight experience. Modular battery design equipped with an intelligent power management system ensures battery longevity and easy installation. Comprehensive flight controls with specialty maneuvers and 6G mode using a 6-axis gyroscope, perfect for beginners. Ascents, descent, forward, backward, left fly, right fly, left rotation, right rotation, route flight, brush pot and other stunts. Low-voltage alarm, stall protection, out-of-control protection, large and small rudder conversion, one-key take-off, one-key landing and other functions. Equipped with a dedicated USB charger, fast and stable charging. Package included: 1X Helicopter 1,2 or 3 Lithium battery (depending on selection) 1X Remote control 1X USB cable 5X Main propeller 1X Tail propeller 1X Screwdriver 1X Hex wrench 1X Instructions
@@emem1613 Oh, thật tiếc vì không có thông tin mà tôi cần, nhưng không sao, cám ơn bạn vì sự nhiệt tình này! Chúc may mắn!
The main rotor shaft is bent, you can clearly see that it is "jamming"...
Thanks Der. I’ve shelved this toy because it’s unsafe. Sticking to planes for the time being. Thanks for visiting, Mark
Right? I wish I would have received a non-defective helicopter. Wishing you success with yours. Thanks for visiting yusakkrisdiyanto! 😊, Mark
Salut
Comment appairer à une tx16s?
Hi. Answer sent in your first post. Thanks
he's a friend of everyone's, there's a marriage in esc, write a letter to the manufacturer, let them recall the defective batch
Hi @Aleksandr_spb, Thanks for the advice but for this circumstance, it was totally my error. I freaked out thinking it was a fly away and cut throttle 😢
Here’s the complete 1 minute flight and crash if interested. Hope this helps.
czcams.com/video/0o9jIPUxRcM/video.htmlsi=MEI4vpWJjMitQSAK
Here’s the CRASH in 10 Seconds
czcams.com/users/shortsIuOvKr9Iu_Q?feature=share
Crashed on maiden flight. Heads up, there are no local replacement parts available so be patient as they ship from China.
Damage assessment:
- Main drive gear cogs melted
- Front light connector housing torn off
- Cracked battery housing
Bro got me hooked!!! @mikeylikesrc
Remember to slow things down, take that sacred pause and enjoy life!
Mark
Items used in the video and the transmitter I use to fly my RC aircraft. Please help support my channel by purchasing from the commissions earned links at no additional cost to you.
RC ERA C189 MD500 Helicopter RTF:
amzn.to/48jtfUQ
GLUE: Bob Smith Industries Maxi-Cure Extra Thick CA (BSI-113)
amzn.to/3up74i3
WORK MAT: Silicone, Magnetic and Heat Resistant
amzn.to/3T57WAP
TWEEZER: Megacast Non Locking Tweezer
amzn.to/4bLFf4q
TRANSMITTER: RadioMaster TX16S Mark II 4-in-1 V4 Mode 2 (M2)
amzn.to/4884eeZ
[As an Amazon Associate I earn from qualifying purchases. Additionally, I’m not sponsored by any of the products. Thank you!]
Non-associate link:
MAIN GEAR: from RCGoing
www.rcgoing.com/rc-era-c189-rc-helicopter-spare/
☠BLACK BARON☠ How long does this toy fly? Or is it just another crashed ... Made in China Toy after 3 months? RC Tech Toy behaves sometimes odd in RC FUNKTECH. It's all about "Consume More".
@@black_baron_net Hi Black Baron. Paperwork and website say Flight Time: About 15-16 minutes. I never got a chance to fly that long since it was one of the defective helicopters. 😢, Mark
Salut
Comment appairer à une tx16s?
Hello @user-gx3hl3un2d, I had a difficult time so I downloaded the file from @andrejsturm - Here’s my TX16S working with the C189 and the link for the file. Good luck!
czcams.com/video/0dPf1iNYx_w/video.htmlsi=TAHExDpHcF1lOI0m