HOW TO: Partner Berlingo Peugeot Citroen | FRONT BRAKE PADS | Tutorial diy
Vložit
- čas přidán 7. 09. 2024
- HOW TO replace your FRONT BRAKE PADS on a Peugeot Partner or Citroen Berlingo
You will need a few basic tools and importantly a 7mm allen/hex.
---
Any questions, please feel free to use the comments.
If you think you cannot do this job safely, take it to a professional.
Stay Safe.
---
Social media stuff:
/ piggypowerofficial
/ piggy.power
Great wee tip on how to clean the slider pins...👍🏼
You're welcome 🤗🐷👍
Best video out there
That's a huge comment. Thanks man
ready...ceramic greases.. i puting subtitle..thanks
Good good 👌🐷
Looking at doing mine tomorrow, but slightly unsure where to put the jack stand, looks like you’ve gone for the control arm bush? Looked online, but not much info, seen a few say use the chassis rails, a few said don’t.
It doesn't have chassis rails, it's a monocoque chassis.
Front subframe near or at a mounting point. 👍🐷
What age is the van your working on?
I have a 2019 partner would this be the same thanks
It's SLIGHTLY different. But this will help massively.
Hi just wondering would I need to bleed the brakes or not? Thanks
No. You're not introducing air anywhere in the hydraulics
Daft question but do you take the cap off the brake fluid so you can move the caliper piston thanks
Never have done. It's worth checking if the fluid is brimmed and removing some as the fluid would overflow otherwise
@PiggyPower that's great thanks
what lubircate use?? thanks..
Lubricant? For what?
grease that you put to lubricate the areas, what did you apply?
Brake specific ceramic or copper if you must
My 206 2001 didn’t pass inspection because the right rear brake is weaker than the rest and I cant get the drum brake off to fix it or swap it out. I tried smashing it with a hammer a lot and I just can’t get it off.
Have you backed off the brake shoes?
@@PiggyPower how do I do that? The hand brake is disengaged in case ur wondering that too.
@@droidking614 obviously I'm happy to help but if you're not sure how a brake shoe adjuster works, maybe it be good to get a friend round who knows how to safely work on vehicle brake systems? Do you have someone who could help?
@@PiggyPower I’m decently ok with cars it’s just that I have tried the tips and trick online and I can’t reach the adjuster wheel. Maybe I thought there was another way but if it’s the adjuster wheel I have to get at then I have to buy a smaller screwdriver to turn it
@@droidking614 yeah, it's not far in there, little torch is key 👍👍 presume you've undon the big nut in the middle too? I have a video how to adjust these properly, have a search 👍 inc the adjuster wheel 👍🐷