CB500X USB port, GPS and Phone charger- electrical wiring
Vložit
- čas přidán 6. 08. 2024
- In this video I will present some possible options you got installing a USB port on your CB500X, and the electrical connection of a USB port, a GPS and Phone charger/holder
00:00:00 INTRO
00:00:52 USB CHARGER FOR YOUR CB500X
00:02:13 PHONE HOLDER/CHARGER
00:02:33 GPS HOLDER/CHARGER
00:02:57 INSTALLING THE USB CHARGER, ELECTRICAL CABLE CONNECTION
00:13:11 INSTALLING THE WIRES FOR THE PHONE AND GPS
Music by:
pixabay.com/users/top-flow-28521292/ - Auta a dopravní prostředky
This the most calm, no rush and precise tutorial on how to do wiring. Thanks Bruv!
Great work, thanks for sharing. Using info from your video and others I managed to plug the connector for the USB without removing the side fairing. I just used a screwdriver to unhook the connector and some pliers to pull it out. Not an easy job because you have to fit both your hands between the fork arm and the fairing, but can be done. Afterwards I fitted the wires in the connector in the right position and just pushed it in with one hand. Ride safely!
Thank you. That was very informative.
Great job man❤
Thnx!
Fabulous informative video thank you for the post
Hi, do you joined both the gps & phone charger cable to the socket for each negative & positive cable? Thanks 😊
yes, negative to negative, positive to positive
Can this same process be used on a 2013? Thanks
I do not have access to a 2013 model, so I do not have sure info. However I made some research and seems, the OP (options) connector underneath the seat has different pinout on the 2013 model, so that part is different. Regarding the connector for the accessory socket I could not find any reliable info, sorry.